Browse > Article
http://dx.doi.org/10.9726/kspse.2012.16.6.052

A Study on Forming Analysis for the Roll Forming Process of 3 Point Under Rail  

Jung, D.W. (Major of Mechanical Engineering, Jeju National University)
Park, S.H. (Major of Mechanical Engineering, Pusan National University)
Jeong, J.H. (Major of Mechanical Engineering, Jeju National University)
Publication Information
Journal of Power System Engineering / v.16, no.6, 2012 , pp. 52-58 More about this Journal
Abstract
Roll forming process is one of the most widely used processes in the world for forming metals such as a furniture drawer guide or an up and down slide guide. It can manufacture goods of the uniform cross section on a large scale throughout the continuous processing. In the domestic design and manufacture, roll forming process for production is taking most of the method of 2-point under rail slide. However, this method is vulnerable to the structural strength and stiffness is not suitable for high load conditions. Therefore, through systematic study of high load, low noise 3-point ball type of under rail slide its own design and manufacturing technology is the need to build. In this paper, to make center member of 3-point ball-type under rail slide for the refrigerator doors, the roll forming modeling and simulation are performed. Tensile test is performed about SCP-1 1/2H for determine the mechanical properties of materials. Modeling and simulation of roll forming is used MSC.MARC software of a dedicated analysis program used by rigid plastic finite element method. Interference between the roll and the final shape are predicted from the results of the simulation.
Keywords
Roll Forming Process; Under Rail Slide; Center Member; Tensile Test; Ball Type;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 Wick, C., Benedic, J. T., and Veilleux, R. F., 1984, "Tool and Manufacturing Engineers Handbook", Society of Manufacturing Engineers, Michigan, Vol. 2, Chapter 8.
2 Tehrani, M. S., Hartley, P., Naeini, H. M. and Khademizadeh, H., 2005, "Localised Edge Buckling in cold Roll-Forming of Symmetric Channel Section", Thin-Walled Structures, Vol. 44, No. 2, pp. 1-13.
3 Lee, S. Y., 2001, "Analysis of Roll Forming Process for Pipe using Rigid-Plastic Finite Element Method", M. S. Dissertation, Sogang Univ., pp. 50-61.
4 Lee, T. S., and KIM, G. H., 2009, "Finite Element Analysis for Precision Roll Forming Process of Stainless Slide Rail", Journal of the Korean Society for Precision Engineering, Vol. 26, No. 8, pp. 96-103.   과학기술학회마을
5 Jeong, S. H, Lee, S. H., Kim, G. H., Kim, J. S. and Kim, J. T., 2008, "A Study on Roll Forming Simulation of Under Rail", Transactions of the Korean Society of Machine Tool Engineers", Vol. 17, No. 3, pp. 78-85.   과학기술학회마을
6 Jeong, D. W. and Yang, K. B., 1999, "A Study the Criterion for Membrane/Shell Mixed Element and Application to the Rigid-Plastic/Elastic- Plastic Finite Element Analysis", The Korean Society of Ocean Engineers, Vol. 13, No. 2, pp. 1-10.   과학기술학회마을
7 Ahn, D. G., Jung, D. W., Yang, D. Y., and Jung, W. J., 1996, "Rigid-Plastic Explicit Finite Element Formulation for Two-Dimensional Analysis of Sheet Metal Forming Processes", The Korean Society of Mechanical Engineers, Vol. 20, No. 1, pp. 88-99.   과학기술학회마을