• ETRI Journal
• /
• v.33 no.3
• /
• pp.393-400
• /
• 2011

A systematic approach for the design of two-stage class AB CMOS unity-gain buffers is proposed. It is based on the inclusion of a class AB operation to class A Miller amplifier topologies in unity-gain negative feedback by a simple technique that does not modify quiescent currents, supply requirements, noise performance, or static power. Three design examples are fabricated in a 0.5 ${\mu}m$ CMOS process. Measurement results show slew rate improvement factors of approximately 100 for the class AB buffers versus their class A counterparts for the same quiescent power consumption (< 200 ${\mu}W$).

• ETRI Journal
• /
• v.35 no.2
• /
• pp.226-233
• /
• 2013

This paper presents a two-stage power-efficient class-AB operational transconductance amplifier (OTA) based on an adaptive biasing circuit suited to low-power dissipation and low-voltage operation. The OTA shows significant improvements in driving capability and power dissipation owing to the novel adaptive biasing circuit. The OTA dissipates only $0.4{\mu}W$ from a supply voltage of ${\pm}0.6V$ and exhibits excellent high driving, which results in a slew rate improvement of more than 250 times that of the conventional class-AB amplifier. The design is fabricated using $0.18-{\mu}m$ CMOS technology.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.4
• /
• pp.481-487
• /
• 2016

A new two-line based inversion driving method is introduced for low power display-driver ICs. By inserting a timing offset between the chopper stabilization and the alternation of LCD polarity, we can reduce power consumption without noticeable degradation in the display quality. By applying the proposed scheme to 12" LCD applications, we achieved 7.5% and 27% power saving in the display-driver IC with white and black patterns, respectively.

• Journal of Mechanical Science and Technology
• /
• v.15 no.11
• /
• pp.1517-1523
• /
• 2001

The effect of power supply voltage on the performance limits in a laboratory magneto-rheological fluid based device was identified by experiments. It suggests that the frequency range of motion for control is limited by the voltage attenuation due to the coil inductance and the maximum power supply voltage set for practical use of an MRF devices. In this work, the magnetic and electrical characteristics of the MRF device are investigated and a design procedure is formulated to achieve the desired performance for a given power supply.

• Proceedings of the KSMRM Conference
• /
• 2002.11a
• /
• pp.83-83
• /
• 2002

목적： 현재 임상적으로 사용되고 있는 확산경사자장의 세기 이상( > 1200)의 강한 확산 경사자장이 가해진 경우 뇌구조물들의 확산계수값을 조사하고 고자장(Bo = 3T)에서 이러한 강한 확산 경사자장을 이용하는 경우 1.5T에서 시행하는 경우와의 차이점을 비교 연구해보고자 하였다. 대상 및 방법： 정상 성인 3명을 대상으로 b-value를 0부터 3500까지 변화시키며 확산강조영상을 최대경사자장 40 mT/m, slew rate 150 T/m/s의 경사자장계가 장착된 3T MR scanner (General Electric, USA)에서 획득하였다. 사용한 펄스열은 Stejskal-Tanner type의 확산강조 경사자장이 포함된 single-shot SE EPI를 사용하였으며 영상획득시 사용한 파라미터는 다음과 같다. TR/TE= 10000/95.1, Thickness/space=512mm, FOV=24$\times$21cm, Matrix=128$\times$128, NEX=1 뇌구조물들에 관심 영역을 설정하고 b-value에 따른 신호감소를 측정하였다. 측정된 데이터를 hi-exponential decay 모델을 이용하여 분석하였다.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.8-10
• /
• 2019

In this paper, a bidirectional three-phase push pull converter is analyzed for the high power, wide voltage range applications. From comparison analysis of two switching methods: PWM plus phase-shift (PPS) and dual-asymmetric PWM (DAPWM) with the effect of dead-time, the proposed hybrid control is aimed to reduce the circulating current under wide voltage range operation. Value of leakage inductance effect to the peak current value, current stress and conduction loss in facing the load variation. Trade-off between power range and slew rate of transformer current was analyzed for properly selecting value of the transformer leakage inductance. Experimental results from a 22-kW prototype are provided to validate the proposed concept.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.5
• /
• pp.53-59
• /
• 2019

Continuous ship unloaders (CSUs) are used for the uninterrupted transport of material in processing industries, power plants, and harbors in accordance with the stream rate of the material. This study analyzed the structural integrity and fatigue life of a CSU structure using finite element structural analysis in ANSYS APDL software. The stress varied greatly depending on the luffing angle and the slew angle of the boom conveyor. The structural integrity of the CSU girder was evaluated by applying ASME BPVC Section VIII Division 2. The fatigue cycle at the angle with the greatest stress difference was calculated. The fatigue cycle was calculated by applying the JIS B 8821:2013 fatigue curve. It was confirmed that the fatigue cycle of the CSU satisfies the allowable fatigue of 200,000 cycles.

• Journal of IKEEE
• /
• v.14 no.2
• /
• pp.51-57
• /
• 2010

A CMOS rail-to-rail high voltage buffer amplifier is proposed to drive the gamma correction reference voltage of large TFT LCD panels. It is operating by a single supply and only shows current consumption of 0.5mA at 18V power supply voltage. The circuit is designed to drive the gamma correction voltage of 8-bit or 10-bit high resolution TFT LCD panels. The buffer has high slew rate, 0.5mA static current and 1k$\Omega$ resistive and capacitive load driving capability. Also, it offers wide supply range, offset voltages below 50mV at 5mA constant output current, and below 2.5mV input referred offset voltage. To achieve wide-swing input and output dynamic range, current mirrored n-channel differential amplifier, p-channel differential amplifier, a class-AB push-pull output stage and a input level detector using hysteresis comparator are applied. The proposed circuit is realized in a high voltage 0.18um 18V CMOS process technology for display driver IC. The circuit operates at supply voltages from 8V to 18V.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.4
• /
• pp.538-542
• /
• 2018

In order to generate a clock source with low cost and high performance in system on chip(SoC), a relaxation oscillator with stable output characteristics according to PVT(process, voltage and temperature) fluctuation require a low area and a low power. In this paper, we propose a solution to reduce the current loss caused by parasitic components in the conventional relaxation oscillator. Since the slew rate of the bias current and the capacitor are adjusted to be the same through the proposed solution, a relaxation oscillator with low area characteristics is designed for the same clock source frequency implementation. The proposed circuit is designed using the TSMC CMOS 0.18um process. The Simulation results show that the relaxation oscillator using the proposed solution can prevent the current loss of about $279{\mu}A$ and reduce the total chip area by 20.8% compared with the conventional oscillator in the clock source frequency of 96 MHz.

• Progress in Superconductivity
• /
• v.13 no.3
• /
• pp.195-202
• /
• 2012

In this paper, we designed Active Magnetic Bearing (AMB) for large scale Superconductor Flywheel Energy Storage System (SFESS) and PD controller for AMB. And we experimentally evaluated SFESS including hybrid type AMB. The radial AMB was designed to provide force slew rate that was sufficient for the unbalance disturbances at the maximum operating speed. The thrust AMB is a hybrid type where a permanent magnet carries the weight of the flywheel and an electromagnetic actuator generates the dynamic control force. We evaluated the design performance of the manufactured AMB through comparison of FEM analysis and the results of experimental force measurement. In order to obtain gains of PD controller and design a notch filter, the system identification was performed through measuring frequency response including dynamics for the AMBs, a power amp and a sensor using a sine swept test method after levitating the flywheel. Through measuring the current input of the AMBs and the orbit of a flywheel according to rotational speed, we verified excellent control performance of the AMBs with small amount current for the large scale SFESS.