• Journal of the Korean Home Economics Association
• /
• v.41 no.7
• /
• pp.185-200
• /
• 2003

The purpose of this study was to investigate the fitness using the draft method to develop moderate-stretch knit block pattern for young women in Korea. The subjects were three women within the range of the ages from 18 to 24 showing the average body figures. In this study, 4 different patterns were drafted for the moderate stretch knitted fabrics, that were categorised into two different types. The first type of these was made up for kilted fabrics and the other was initially drafted for woven fabrics and altered for knitted materials afterward. The major findings derived from this investigation were as follows; 1. According to each sensory evaluation for the appearance test on fitness, knit block patterns A and D were the better than the rest of them. 2. Knit block patterns A and D with higher evaluation scores were drafted with body size measurements except the waist line, whereas patterns B and C with relatively lower scores were produced including the smaller ease amounts than the woven block pattern. 3. To see the results of the functional test based on the designed ten motions for this experiment, knit block patterns A and B were concluded as better than the rest of them. In addition, concerning the arm liking motions, pattern B was scored as the best among the developed patterns.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.9
• /
• pp.85-95
• /
• 2004

As the design complexity increases, it is a major problem that the size of test pattern is large and power consumption is high in scan, especially system-on-a-chip(SoC), with the automatic test equipment(ATE). Because static compaction of test patterns heads to higher power for testing, it is very hard to reduce the test pattern volume for low power testing. This paper proposes an efficient compression/decompression algorithm based on run-length coding for reducing the amount of test data for low power testing that must be stored on a tester and be transferred to SoC. The experimental results show that the new algorithm is very efficient by reducing the memory space for test patterns and the hardware overhead for the decoder.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.2
• /
• pp.38-45
• /
• 2005

Chemical mechanical polishing(CMP) has been widely accepted for the planarization of multi-layer structures in semiconductor fabrication. But a variety of defects such as abrasive contamination, scratch, dishing, erosion and corrosion are occurred during CMP. Especially, dishing and erosion defects increase the metal resistance because they decrease the interconnect section area, and ultimately reduce the lift time of the semiconductor. Due to this reason dishing and erosion must be prohibited. The pattern density and size in chip have a significant influence on dishing and erosion occurred by over-polishing. The fixed abrasive pad(FAP) was applied and tested to reduce dishing and erosion in this paper. The abrasive concentration decrease of FAP results in advanced pattern selectivity which can lead the uniform removal in chip and declining over-polishing. Consequently, reduced dishing and erosion was observed in CMP of tungsten pattern wafer with proposed FAP and chemicals.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.100-104
• /
• 2005

The injection molding is very effective process for various plastic products due to its high productivity. It is also good fur precise products like optical parts. Various thermoplastic materials are also available with this injection molding process. In recent, however, as the overall size of the product increases and micro or nano scale of patterns are applied to the products, we now have some problems such as low fidelity of the replication of the pattern, high molding pressure, or warpage from the in-mold stress. Injection/compression molding is studied to overcome those problems in molding large thin plate with micro pattern array on its surface. An injection compression mold is designed to 3 pieces mold for side gate. We install 4 pressure transducers and 9 thermocouples to measure the melt pressure and surface temperature in the cavity during the process. As a result, the maximum molding pressure for injection compression molding is reduced to 1/3 compared to injection molding and the uniformity of the pressure in the cavity is enhanced by about 15%.

• Journal of the Korean Home Economics Association
• /
• v.8 no.1
• /
• pp.62-86
• /
• 1970

A study on the upper garment of Korean women, JUORI The upper garment of Korean women. JUGORI, is an inherited mode from the ancient clothing style in the various aspects based on the particulars of Korean clothes. The ancient style of clothes is originated from KWAMDUI belonging to inhabitants of Northern Territory of Korea. And it is quite different from Chinese clothes in lineage. However, this unicque mode of clothes has been much influnced by the Chinese culture and also by the climate of Korea. And it is quite different from Chinese clothes in lineage. However, this unicque mode of clothes has been much influnced by the Chinese culture and also by the climate of Korean penynsula. The changes of the pattern of JUGORI, in a word, is a sign of shortening tendency of size. This tendency of JUGORI is remarkably seen in the shortening of length and other parts are decreased in size. The JUGORI in the ancient age was fallen below the weist of woman, which is similar to Robe, and was worn with band. However, the length of the JUGORI has been gradually shortened, and therefore, GORUM took place of the band. The shortening tendency of JUGORI is seemed to be shown its sign in the initial time of its origin, because there are some evidences that the women in Sylla Dynasty, and this tendency has been much expedited during the period of Koryu Dynasty with influences of Monggorian culture (Won Lynasty of China) The oldest sample for data of JUGORI in nowaday is one the remains of Yi Dynasty, and this sample for data provides all the particulars of the modern pattern of JUGORI. The tendency of JUGORI had been continued even in Yi Dynasty, and at the end of the Dynasty, the clothes was shortened that the women felt inconvenient wearing it in the status of the shortened JUGORI which was even hardly cover the initial time of epoch of modernization induced from the Western civilization, and after 1920s and 1930s JUGORI become a larger tendency. This is a sing of revival of practical use and rationalization of JUGORI become a shortening tendency again, and the size is similar with that of early age of Yi Dynasty. Instead of these similarities, the particulars of modern JUGORI is weighing on much emphasis on curve beauty and expression of experior beauty. The reason is that, together with westernization of clothes, JUGORI became a special pattern of clothes as a traditional Korean women wears. The very thing explaining this pattern of JUGORI is the "ARIRANG DRESS". And there are some fashion using button instead of GORUM and half sleeve JUGORI for summer use which is regarded as a part of improved aspect of life in Korea. in Korea.

• Journal of the Korean Home Economics Association
• /
• v.35 no.3
• /
• pp.287-305
• /
• 1997

The purpose of this study was to analyze a causal effect on the housewife's leisure activity participation, leisure expenditure and leisure life satisfaction. Data was collected 249 housewives in Pusan. Data were analysed using descriptive statistics, one-way Anova, multiple regression, Pearson's correlation and path analysis. The main findings of the research were as follows: First, there were significant differences in leisure activity participation according to socio-demographic and economic variables. Physical type showed significant differences when housewife was 30's and unemployed, size of family was 3 and 4, age of the lastborn child was under 6, occupation of husband was professionals and technicians, educational attainment of housewife was under highschool graduate, pattern of housing was collective, income was higher. There were significant differences that occupation of husband was professionals and technicians, educational attainment of housewife was over junior college graduate, pattern of housing was collective, income was higher in self-developing type. restful type showed significant differences when housewife was 40's, age of the lastborn child was under 13-18, educational attainment of housewife was under highschool graduate. There were significant differences that housewife was unemployed in home-oriented type. There were significant differences that housewife was 30's and unemployed, size of family was 4, age of the lastborn child was under 6, occupation of husband was market and sales worker, educational attainment of housewife was over junior college graduate, pattern of housing was collective in time-spending type. Second, there were significant differences in leisure time, leisure expenditure and leisure life satisfaction according to socio-demographic and economic variables. Leisure time showed significant differences when housewife was unemployed, age of the lastborn child was under 13-18, occupation of husband was service, educational attainment of housewife was under highschool graduate, income was higher. Leisure expenditure showed significant differences when housewife was 30's, size of family was under 3, age of the lastborn child was under 6, occupation of husband was senior officials and manager, educational attainment of housewife was over junior college graduate, pattern of housing was collective, income was over 5,000,000 won. There were significant differences that housewife was unemployed in leisure life satisfaction. Third, casual effect was path analysed according to path model. Employment and unemployment of housewife, income and occupation of husband (product & transport equipment operator) had an effect on phycial type. Age of housewife, employment and unemployment of housewife and occupation of husband (product & transport equipment operator) had an effect on children-concerned type. Age of housewife had an effect on social-concerned type. Education of husband, income, age of lastborn child and occupation of husband (professor and teacher) had an effect on self-developing type. Age of lastborn child, employment and unemployment of housewife and occupation of husband(product & transport equipment operator) had an effect on children-concerned type. Age of lastborn child and children number had an effect on religious-social type. Employment and unemployment of housewife had an effect on home-oriented type. Age of housewife, education of husband had an effect on time-spending type. Restful type, employment and unemployment of housewife, and occupation of husband(service) have an effect on leisure time. Income, leisure time, self-developing type, children concerned type and occupation of husband(senior officials and manager) had an effect on leisure expenditure. Leisure expenditure, self-developing type, employment and nemploymentof housewife, income had an effect on leisure life satisfaction.

• Journal of the Korean Society of School Health
• /
• v.7 no.1
• /
• pp.29-36
• /
• 1994

The purpose of this study was to explain the performance pattern of health education and related factors in elementary school. The data were collected from school nurses who have been working elementary school. Sample of 77 were analyzed by percent distribution, ${\chi}^2$-test, discriminant analysis. The performance rates of health education was 74%, Only 19% of total carried out health education of 6 hours per week. Important variables that was showed significant association with health education level were as follows: Perception of importance about health education among personal characteristics of school nurses and size of school c1ass, cooperation level of school administrator, operation method of school health clinic, the difficulty of school health clinic among school organization characteristics. The canonical correlation between the health education (yes or no) and important independent variables was 0.52. Among them, operation method of school health clinic. perceiveness of health education, size of school class represented the significant contribution (canonical coefficient: 0.66, 0.54, 0.52) to school health education. These findings suggest that structure and management variables of school organization are more important than personal variables of school nurses related to activation of school health education. Therefore, it is expected that the quantity and quality improvement of school health education be able to accomplish through the systematic support of school organization and government demension.

• Journal of Forest and Environmental Science
• /
• v.38 no.4
• /
• pp.275-283
• /
• 2022

A study was designed to investigate the pattern of sexual dimorphism in a plantation of Garcinia kola. Twenty trees were randomly selected for the study and have been observed to flower regularly. A total of 100 inflorescence were randomly collected from the crown of each tree and 500 flowers randomly assessed within the period of four (4) flowering seasons. Floral sex assessment was done visually and with a hand magnifying lens; floral morphometric measurements (i.e. pedicel and perianth length and breadth), inflorescence length, and breadth) was taken using a veneer caliper; number of flowers per inflorescence and inflorescence per twig was counted; while, data analysis was conducted on excel using analysis of variance and pairwise t-test comparison. Four floral sexes were identified in the G. kola plantation studied which were unisexual male flowers, unisexual female flowers, cosexual unisexual male flowers, and cosexual hermaphrodite flowers. Three tree sexes were identified viz: inconstant male, invariant female, and cosexual trees. The plantation was significantly sexually dimorphic in floral sex and phenotypic traits (i.e. pedicel and perianth size), and as well as sexually dimorphic in tree sex and reproductive phenotypic traits (i.e. inflorescence size, number of inflorescences per twig, and number of flower bud per inflorescence). The sexual system of the plantation was therefore trioecious with features suggestive of evolving dioecy through the gynodioecious pathway.

• The Journal of the Korean Society for Microbiology
• /
• v.34 no.5
• /
• pp.445-452
• /
• 1999

Eight strains of multidrug-resistant (MDR) Salmonella typhi were isolated from Kyonggi area during January-February, 1997. They were resistant to ampicillin, amoxicillin, carbenicillin, tetracycline, chloramphenicol, trimethoprim/sulfamethoxazole, trimethoprim. Eight strains had one plasmid respectively which size was approximately M.W 220 kb and showed same restriction pattern by endonuclease HindIII. The plasmid was similar to the plasmid in size that was related to multidrug resistant S. typhi isolated from southeast Asia. It were transferred by conjugation to recipient E. coli K-12 in frequency of $2.43{\times}10^4-1.73{\times}10^{-2}$ and transconjugant showed same drug-resistant pattern with donor cells. All of 8 strains produced ${\beta}$-lactamase that was assummed to TEM-l type by isoelectric focusing and PCR.

• Journal of the Semiconductor & Display Technology
• /
• v.5 no.4 s.17
• /
• pp.11-15
• /
• 2006

Expose equipment system that is used for manufacturing process of Flat Panel Display, is most important equipment in whole process. Expose equipment that is for making pattern of mask on substrate, consists of optical part, stage part and transport part. The stage is an important part that aligns mask and substrate for delivering pattern of mask to substrate exactly. In this paper, control system of expose stage that is able to use mask and substrate of diverse size, with PC controller using GUI interface instead of PLC control system. The existing PLC control system does not have the suitable structure for using mask of diverse size. GUI interface integration control system is based on PC. So it has the advantage of convenient use and active operation. We embodied PLC control system in integration control system based on PC, and verified utility possibility through the standard test course.