• Korean Journal of Materials Research
• /
• v.12 no.11
• /
• pp.850-855
• /
• 2002

Silica powders were prepared from $SiCl_4$-$H_2$O system by chemical vapor deposition process, and investigated on size control of the products with reaction conditions. The products were amorphous and nearly spherical particles with 130nm~50nm in size. The size distribution became narrow with the increase of [$H_2$O]/[SiCl$_4$] concentration ratio. The particle size decreased with the increase of reaction temperature, [$H_2$O]/[SiCl$_4$] concentration ratio and total flow rate. The specific surface area measured by BET method was about three times larger than that of electron microscope method.

• Journal of Korean Society for Quality Management
• /
• v.31 no.1
• /
• pp.132-141
• /
• 2003

As the technology has improved and demands of customers have varied, a lot of products are getting diverse and intricate. Consequently, the enterprise that produce products have to simultaneously consider the various variables for the very products. There are some scheme, such as Multivariate control chart and Demerit control chart, designed to simultaneously monitor the variables in the process. In this paper, we present an effective method for process control using the Demerit-CUSUM control chart in the process where nonconforming units or nonconformities are occured by various types. In addition, we show interpretation method for abnormal signal in order to quickly detect the assignable causes as Demerit-CUSUM control chart signals abnormality. we compare performance of Demerit control chart and Demerit-CUSUM control chart using example again used in the existing studies, and present result of performance accoriding to changing sample size and parameter.

• Journal of Korean Institute of Industrial Engineers
• /
• v.11 no.2
• /
• pp.11-18
• /
• 1985

Three types of warranty policies are considered. They are (1) free warranty policy for repairable products, (2) free warranty policy for nonrepairable products, and (3) rebate warranty policy. Under each warranty policy, a single sampling attribute plan with non-destructive testing is considered. A sampling plan is characterized by the sample size and the acceptance number. For each case, characteristics of an optimum sampling plan are discussed and determined, which minimize the warranty cost and the corresponding quality control cost within the assigned producer's risk and consumer's risk.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.2035-2036
• /
• 2006

Most industrial robot have not load control box because of robot's weight and volume. A robot is connected to its control box by cables. and then there are a lot of problem for transfer, management and operation of robot. Now a day, A lot of control module are made small size by development of electronics part technology and control technology and they are developing as embedded and loading system. For that, control module and its servo system for a mobile robot is developed. they are small size in comparison with conventional products.

• Journal of Ginseng Research
• /
• v.33 no.1
• /
• pp.65-71
• /
• 2009

This experiment was done to determine the optimum conditions for the induction of tetraploidy in Panax ginseng C. A. Meyer using bud length, temperature and plant growth regulator pretreatments. Highest callus formation was obtained when the medium was inoculated with flower bud in the size of 2-3 mm in length. The optimum temperature for the callus formation was high when treated at $4^{\circ}C$ for 4-5 days. Among the treatments of growth regulators and different concentration, highest callus formation was observed in combination of 5 mg/L 2,4-D and 1 mg/L kinetin for P. ginseng. As a result of flow cytometer analysis, all 7 adventitious roots were confirmed as tetraploidys. Cytological analysis revealed that the chromosome number of tetraploid roots was 96, while that of diploid roots was 48. Tetraploid ginseng roots were inoculated to flower bud size of 2-3 mm in length. The callus formation was optimum when treated with 1 mg/L 2,4-D at $4^{\circ}C$ for 5 days. Compared with control roots, tetraploid roots were thicker and longer and had few lateral branches. Fresh weight of tetraploid roots was relatively higher than the control roots.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.25 no.1
• /
• pp.63-70
• /
• 2002

The purpose of this paper is to investigate the customer's requirements for shoe products using the survey method, to analyze customers' needs, and to supply information to make the shoe that they want. For this work, we made 38 survey items for the degree of shoe satisfaction, for foot care and shoe control, for shoe characteristics, and for shoe purchase in future. For the purchase of shoe products in future, customers in their twenties gave the highest score for shoe design among price, design, size, fashion, fitness, color, brand, so forth. However, respondents in their forties selected the degree of fitness instead of shoe design. In the question for the buying price of shoe products in future, all customers wanted shoe products between 30,000 won md 50,000 won.

• Journal of Korean Institute of Industrial Engineers
• /
• v.34 no.1
• /
• pp.32-41
• /
• 2008

This paper studies a joint EOQ and EPQ model in which a stationary demand can be satisfied by recycled products as well as newly purchased products. The model assumes that a fixed quantity of the used products are collected from customers and later recovered for reuse. The recovered products are regarded as perfectly new ones. We also assume that the number of orders for newly purchasing items and the number of recovery setups in a cycle can be mutually independent integers. Under these assumptions, we develop an optimization model obtaining the economic order quantity for newly procured products, the optimal lot size for the recovery process, and the sequence of the orders and the setups, simultaneously. And then a simple solution procedure to find a local optimal control parameter set is proposed. To validate the model and the solution procedure, finally, some computational experiments are presented.

• Journal of Korean Society for Quality Management
• /
• v.30 no.2
• /
• pp.47-59
• /
• 2002

The purpose of this paper is to investigate the customers' requirements for shoe products using the survey method, to analyze customers' needs, and to suggest information to make the shoe that they want. For this work, we made 38 survey items for the degree of shoe satisfaction, for foot care and shoe control, for shoe characteristics, and for shoe purchase in future. For the purchase of shoe products in future, customers in their twenties gave the highest score for shoe design among price, design, size, fashion, fitness, color, brand, so forth. However, respondents in their forties selected the degree of fitness instead of shoe design. In the question for the buying price of shoe products in future, all customers wanted shoe products between 30,000 won and 50,000 won.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.33 no.1
• /
• pp.75-82
• /
• 2020

Objectives : The purpose of this study is to report the effect of traditional oriental hair care products and Yukmijihwang-huan on two androgenetic alopecia patients. Methods : Two androgenetic alopecia patients were treated by traditional oriental hair care products and Yukmijihwang-huan was prescribed to all two patients. Improvements of patients were evaluated through photographs. Results : As a result of examining photographs, symptoms of alopecia in two cases were improved. Conclusions : This study shows us that traditional oriental hair care products and Yukmijihwang-huan effect on two androgenetic alopecia patients. However, prospective study with big sample size control would be required.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.32 no.1
• /
• pp.94-101
• /
• 2009

Complex Products may present more than one type of defects and these defects are not always of equal severity. These defects are classified according to their seriousness and effect on product quality and performance. Demerit systems are very effective systems to monitoring the different types of defects. So, classical demerit control chart used to monitor counts of several different types of defects simultaneously in complex products. S.M. Na et al.(2003) proposed the Demerit-CUSUM for the improvement of the demerit control chart performance and Nembhard, D. A. et al.(2001) and G.Y Cho et al.(2004) developed a Demerit control chart using the EWMA technique and evaluated the performance of the control chart. In this paper, we present an effective method for process control using the Demerit-CUSUM with fast initial response. Moreover, we evaluate exact performance of the Demerit-CUSUM control chart with fast initial response, Demerit-CUSUM and Demerit-EWMA according to changing sample size or parameters.