• Journal of Sericultural and Entomological Science
• /
• v.20 no.2
• /
• pp.20-25
• /
• 1978

Research on the hormones of insect has followed by the special opportunities and problems arising from pollution. Since then, the main frame of it has been energetically exploited by ligation, decapitation and so on. In the meanwhile, knowledge of the biochemistry of hormone action as well as other aspects of biochemistry in insects has been gradually disclosed. Since 1966, practical use of active analogs of the hormones has been also worked out as an insecticide and brought the features of it to the light. On the other hand, it is expected to afford the increase of silk productivity resulted from control of the fifth larval period by delaying normal development. With these regards, some of analogs have been tried to apply practically to the silkworm. One of them is "Manta" produced by Zoecon Chemical Company and it is presently used for the increase of silk productivity in Japan. Another one is "R-20458", not registered one, issued by Stuffer Chemical Company. It is still pending for the silkworm growth regulator For the possibility of practical use, two chemicals are tested on the increase of silk productivity by topical application and the obtained results are summarized as follows. 1. It is evident that the fifth larval period was extended by topical application of the tested chemicals "Manta"and "R-20458"at the fifth instar after 51 hours of the last ecdysis, ranging from 12 hours to one day, as compared to. the control 2. In survival rates, there is no significance at 5% level between control and treatments. It proved that there was no toxity to silkworm by topical aprication. 3. There is an increase of cocoon yield in both chemical treatments. It was resulted from increase of weight of single cocoon. "Manta"2.5ppm produced 22.2kg of cocoon. It is equal to 9% increase in index, as compared to that of control. In case of R-20458, the increasing rates were varied at the different concentration; 21.4kg of cocoon production with 5% increase at 5ppm, 20.9kg of it with 2% increase at 2.5ppm and 20.6kg of it with 1% increase at 1. 25ppm in index, respectively, as compared with that of control. 4. Percentage of cocoon shell was increased by topical application. In case of "Manta" 2.5ppm, it is 25.6% which is equal to 6% increase in index, as compared with that of control. For "R-20458", the increasing rates of percentage of cocoon shell were varied with the different level of chemical concentration. They are 25.0% of 4% increase at 2.5ppm, 24.9% of 3% increase at 1.25ppm and 24.7% of 3% increase at 5ppm. 15% increase was attained at "Manta" 2.5ppm in the weight of cocoon layer based on cocoon yield and percentage of cocoon shell in index, as compared with that of control. The rates for "R-20458"are 5% increase at 2.5ppm and 4% increase at 1. 25ppm in index.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.3
• /
• pp.25-32
• /
• 2021

In this paper, the Magneto-Electric(ME) dipole array antenna with dual-polarization in the X-Band is proposed and it is implemented and measured. The proposed array antenna is composed of 32 single ME dipole antenna and a Teflon PCB. 1 × 1 ME dipole antenna is implemented dual-polarization by radiating vertical polarization and horizontal polarization from two pairs of radiators. 2-port feeding structures are realized by lamination process using LTCC. And, each port independently feeds the radiator through a Γ-shaped feeding strip with isolation between ports. The Teflon PCB used in the antenna array has a 4-layer structure, and 2-port is fed through the top and bottom layers. The λ_g/4 transformer is applied to the transmission line of the Teflon PCB for impedance matching of the arrayed antenna and the Teflon PCB, and the optimal parameters are obtained through simulation. The measured maximum antenna gains of port 1 was 18.2 dBi, Cross-pol was 1.0 dBi. And the measured maximum antenna gains of port 1 was 18.1 dBi, Cross-pol was 3.2 dBi.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.31 no.4
• /
• pp.154-158
• /
• 2021

The optical transmittance of Mn-doped SnO₂ monolayer film increased gradually from 80.9 to 85.4 % at 550 nm wavelengths upon increasing the O₂/Ar+O₂ concentration rate from 0 to 7.9 % and the band gap energy changed from 3.0 to 3.6 eV. The resistivity tended to decrease from 3.21 Ω·cm to 0.03 Ω·cm, reaching a minimum at 2.7 %, and then gradually increased from 0.03 to 52.0 Ω·cm at higher O₂/Ar+O₂ gas concentration ratio. Based on XPS spectra analysis, the Sn 3d_5/2 peak of Mn-doped SnO₂ single layer shifted slightly from 486.40 to 486.58 and O_1s peak also shifted from 530.20 to 530.33 eV with increase the O₂/Ar+O₂ concentration ratio. Therefore, the XPS spectra results indicate that a multiphase with SnO and SnO₂ coexisted in the sputtered Mn-doped SnO₂ monolayer film.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.22 no.3
• /
• pp.55-71
• /
• 2019

The purpose of this study is to propose an evaluation method to assess green environments of streetscapes to improve urban street green spaces in Jeonju City. Through a rapid assessment of urban street green spaces, we suggest an objective basis for expanding street green space as well as for adopting sustainable maintenance and improvement measures. We choose 12 sections of streetscapes (roads and sidewalks) to investigate existing street conditions which have more than four lanes and function as major road axes. Six large roads and six medium roads of Jeonju City center area are investigated as pilot assessment study sites. Site inventory checklists consist of environmental characteristics of streetscape, street tree status, and planting condition evaluation. Environmental characteristics of streetscapes are composed of physical and neighborhood factors. For instance, items for physical factors are types and width of road/sidewalks, paving materials, tree protection materials, and green strip. And surrounding landuse is a neighborhood factor. Assessment items for street tree status are street plant names (tree/shrubs/ground cover), size, and planting intervals. Planting condition evaluation items are tree shape, damage, canopy density, and planting types with existence of adjacent green space. Evaluation results are classified into three levels such as A(maintain or repair), B(greening enhancement), and C(structural improvement). In case of grade A, streetscapes have enough sidewalk width for maintaining green strip and a multi-layered planting(in large road only) with fairly good growing conditions of street trees. For grade B and C, streetscapes have a moderate level of sidewalk width with a single street tree planting. In addition, street tree growing conditions are appeared poor so that green enhancement or maintenance measures are needed. For median, only grade B and C are found as its planting growing foundations are very limited in space. As a result, acquiring enough sidewalk space is essential to enhance ecological quality of urban street green. Especially, it is necessary to have green strip with reasonable widths for plant growing conditions in sidewalks. In addition, we need to consider native species with multi-layer plant compositions while designing street green.

• Composites Research
• /
• v.33 no.6
• /
• pp.371-376
• /
• 2020

The adhesive strength can be improved through surface treatment. The most common method is to improve physical bonding by varying the surface conditions. This study presents the effect of laser surface treatment on the adhesive strength of CFRP. The surface roughness was patterned using a 1064 nm laser. The effects of the number of laser shots and the direction and length of the pattern on the adhesion of the CFRP/CFRP single joint were investigated through tensile tests. Tests according to ASTM D5868 were performed, and the bonding mechanism was determined by analyzing the damaged surface after a fracture. The optimized number of the laser shots and the optimized depth of the roughness should be required to increase the bonding strength on the CFRP surface. When considering the shear stress in the tensile direction, the roughness pattern in the direction of 45° that increases the length of the fracture path in the adhesive layer resulted in an increase of the adhesive strength. The surface treatment of the bonding surface using a laser is a suitable method to acquire a mechanical bonding mechanism and improve the bonding strength of the CFRP bonding joint. The study on the optimized laser process parameters is required for utilizing the benefits of laser surface processing.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.2
• /
• pp.93-101
• /
• 2021

Recently, with the urban redevelopment and the spread of the planned cities, there is increasing interest in the wind environment, which is related not only to design of buildings and landscaping but also to the comfortability of pedestrians. Numerical analysis for wind environment prediction is underway in many fields, such as dense areas of high-rise building or composition of the apartment complexes, a precisive 3D building model is essentially required in this process. Many studies conducted for wind environment analysis have typically used the method of creating a 3D model by utilizing the building layer included in the GIS (Geographic Information System) data. These data can easily and quickly observe the flow of atmosphere in a wide urban environment, but cannot be suitable for observing precisive flow of atmosphere, and in particular, the effect of a complicated structure of a single building on the flow of atmosphere cannot be calculated. Recently, drone photogrammetry has shown the advantage of being able to automatically perform building modeling based on a large number of images. In this study, we applied photogrammetry technology using a drone to evaluate the flow of atmosphere around two buildings located close to each other. Two 3D models were made into an automatic modeling technique and manual modeling technique. Auto-modeling technique is using an automatically generates a point cloud through photogrammetry and generating models through interpolation, and manual-modeling technique is a manually operated technique that individually generates 3D models based on point clouds. And then the flow of atmosphere for the two models was compared and analyzed. As a result, the wind environment of the two models showed a clear difference, and the model created by auto-modeling showed faster flow of atmosphere than the model created by manual modeling. Also in the case of the 3D mesh generated by auto-modeling showed the limitation of not proceeding an accurate analysis because the precise 3D shape was not reproduced in the closed area such as the porch of the building or the bridge between buildings.

• Journal of Hydrogen and New Energy
• /
• v.32 no.6
• /
• pp.442-454
• /
• 2021

The porous transport layer (PTL) is essential to effectively remove oxygen and hydrogen gas from the electrode surface at high current density operation conditions. In this study, the effect of PTL with different characteristics such as pore size, pore gradient, interfacial coating was investigated by multi-layered sintered mesh. A water electrolysis single cell of active area of the 34.56 cm² was constructed, and IV performance and impedance analysis were conducted in the range of 0 to 2.0 A/cm². It was confirmed that the multi-layered sintered mesh PTL, which have an average pore size of 25 to 57 ㎛ and a larger pore gradient, removed bubbles effectively and thus seemed to improve IV performance. Also, it was confirmed that the catalytic metals such as Ni, NiMo coating on the PTL reduced activation overpotential, but increased mass transport overpotential.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.4
• /
• pp.333-341
• /
• 2022

Magnetoelectric (ME) composites are comprised of magnetostrictive and piezoelectric phases. Lots of theoretical and experimental works have been done on ME composites in the last couple of decades. The output performance of ME composites has been enhanced by optimizing the constituent phases, interface layer, dimensions of the ME composites, different operating modes, etc. However, the detailed information about the characterization of ME coupling in ME composites is not provided yet. Therefore, in this tutorial paper, we are giving an insight into the details of measurements of ME voltage coefficient of ME composites both at off-resonance and resonance conditions. A symmetric type Gelfenol/PMN-PZT/Gelfenol ME composites were fabricated by sandwiching (011) 32-mode PMN-PZT single crystal between two Galfenol plates by epoxy bonding are used for the example of ME coupling measurement. The details about the experimental setup used for the measurement of ME voltage coefficient are provided. Furthermore, a step-by-step measurement of ME voltage coefficient using computerized program is demonstrated. We believe the present experimental measurement details can help readers to understand the concept of ME coupling and its analysis.

• Korean Chemical Engineering Research
• /
• v.60 no.4
• /
• pp.550-556
• /
• 2022

The performance of enzymatic fuel cells that convert chemical energy contained in various organic molecules such as sugar, alcohol, organic acids, and amino acids into electrical energy is greatly affected by the cathode as well as the anode. This study aimed to develop a laccase-based cathode with high performance. An enzyme composite composed of an laccase, redox mediator, and carbon nanotubes was immobilized on the surface of electrode in multiple layers, and the effect of the number of layers and the presence or absence of carbon nanotubes on electrode performance was investigated. As the number of layers of the enzyme-mediator (Lac-(PVI-Os-dCl)) on the electrode surface increased, the amount of reduction current generated at the electrode increased. The enzyme-carbon nanotube-mediator composite electrode (Lac-SWCNTs-(PVI-Os-dCl)) generated a current 1.7 times greater than that of the Lac-(PVI-Os-dCl). It was found that the largest amount of current (10.1±0.1 µA) was generated in the electrode composed of two layers of Lac-(PVI-Os-dCl) and two layers of Lac-SWCNTs-(PVI-Os-dCl) in the evaluation of electrodes with different ratio of Lac-SWCNTs-(PVI-Os-dCl) and Lac-(PVI-Os-dCl). The maximum power density of the cell using the cathode composed of a single layer of Lac-(PVI-Os-dCl) and the cell using the optimized cathode were 0.46±0.05 and 1.23±0.04 µW/cm², respectively. In this study, it was demonstrated that the performance of cathode and the enzymatic fuel cell using the same can be improved by optimizing the layers of composites composed of laccase, redox mediator, and carbon nanotubes on the electrode surface.

• Clean Technology
• /
• v.28 no.4
• /
• pp.323-330
• /
• 2022

Microfluidic paper-based analytical devices (μPADs) have recently been in the spotlight for their applicability in point-of-care diagnostics and environmental material detection. This study presents a double-sided printing method for fabricating 3D-μPADs, providing simple and cost effective metal ion detection. The design of the 3D-μPAD was made into an acryl stamp by laser cutting and then coating it with a thin layer of PDMS using the spin-coating method. This fabricated stamp was used to form the 3D structure of the hydrophobic barrier through a double-sided contact printing method. The fabrication of the 3D hydrophobic barrier within a single sheet was optimized by controlling the spin-coating rate, reagent ratio and contacting time. The optimal conditions were found by analyzing the area change of the PDMS hydrophobic barrier and hydrophilic channel using ink with chromatography paper. Using the fabricated 3D-μPAD under optimized conditions, Ni²⁺, Cu²⁺, Hg²⁺, and pH were detected at different concentrations and displayed with color intensity in grayscale for quantitative analysis using ImageJ. This study demonstrated that a 3D-μPAD biosensor can be applied to detect metal ions without special analysis equipment. This 3D-μPAD provides a highly portable and rapid on-site monitoring platform for detecting multiple heavy metal ions with extremely high repeatability, which is useful for resource-limited areas and developing countries.