• 가족자원경영과 정책
• /
• 제21권2호
• /
• pp.25-50
• /
• 2017

Recently, concern about family safety is rising again as an important issue with the context of family healthiness and well-being in Korean society despite of the dramatic economic growth. The purpose of this study is to examine the status of family safety of singles and single-parent households and to investigate the effect of social capital on the level of their family safety. Data are from the 10th wave of Korea Welfare Panel Study analysing one-person households(N=2,017) and single-parent households(N=172). One-person households were categorized as three groups by age(the youths/middle-aged/the elderly) and single-parent households were also three by family types(mother-child/fahter-child/grandparent-child). The major results were as follows: First, the mean of family safety index was highest among middle-aged, while single youths had the fewest problems in terms of family safety. Second, social capital was found to vary by family structure. In the one-person households, all the levels of the social capital variables, including trust, bond, acceptance, and participation, differed significantly; only two variables, bond and embracement, differed in the single-parent households. Third, social capital differed between the low-income households and others significantly. Forth, the positive effects of social capital on overcoming family safety problems were investigated. In conclusion, social capital represents an alternative resource for overcoming economic hardship for low-income one-person/single-parent households, especially for middle-aged singles and father-child single-parent households. Based on these empirical results, theoretical implications were discussed with regard to family policy and programs.

• Restorative Dentistry and Endodontics
• /
• 제31권6호
• /
• pp.415-426
• /
• 2006

자가부식 상아질 접착제의 중합 후 시간 경과에 따른 접착강도의 변화를 관찰하고, 중합률의 영향을 평가하고자 하였다. 36개의 상하악 대구치를 Single Bond (SB, 3M ESPE, USA), Clearfil SE Bond (SE, Kuraray, Japan), Xeno-III (XIII, Dentsply, Germany), 및 Adper Prompt (AP, 3M ESPE, USA)를 적용하는 4군으로 나누고, 이를 다시 미세인장접착강도 측정 시점에 따라 22$^{\circ}$C의 증류수에 보관 후 48시간에 측정한 군과 7일 후 측정한 군, 및 접착된 시편을 5000회 열순환을 시행하고 측정한 군으로 나누었다. 모래시계 형태의 접착시편을 제작하여 만능시험기 (Model 4466; Instron Co., USA)로 1 mm/min의 하중속도 하에서 미세인장접착강도를 측정하였다. 접착제의 중합률은 Fourier 변환 적외선 분광법을 이용하여 중합 직후, 48시간, 1주일에 측정하였으며, 주사전자현미경을 이용하여 파절 단면을 관찰하였다. 미세인장접착강도와 중합률 모두 시간의 경과에 따라 유의한 증가를 보였으며, 시간 경과와 재료간에 교호작용이 있었다 (미세인장접착강도, 2-way ANOVA, p = 0.018; 중합률, Repeated Measures ANOVA, p < 0.001) . XIII와 AP의 낮은 미세인장접착강도는 낮은 중합률 때문임을 확인할 수 있었다. 48시간 이후에 SE와 AP에서 접착강도가 증가 되는 것은 중합률과는 관련이 없고, 전자현미경에서 관찰되는 접착제층의 성숙에 따른 취성의 증가가 원인일 가능성이 제기된다.

• Journal of Photoscience
• /
• 제9권2호
• /
• pp.1-4
• /
• 2002

Hula-twist is a volume-conserving photoisomerization reaction mechanism postulated in 1985 to account for the rapid photoisomerization of the retinyl chromophore in rhodopsin. The requisite stereochemical consequence of simultaneous isomerization of a double bond and an adjacent single bond has recently been demonstrated in isomerization of pre-vitamin D in an organic glass and by many other examples of organic systems already reported in the literature This paper reports the consequence in applying the mechanism to the primary photochemical process of several photosensitive biopigments: bilirubin, photoactive yellow protein, bacteriorhodopsin and rhodopsin. It is shown that the anchored nature of the chromophores must first be taken into consideration.

• 대한소아치과학회지
• /
• 제30권1호
• /
• pp.54-60
• /
• 2003

본 연구는 영구치와 유치의 상아질 표면에 상품화된 화학기계적 우식치질 제거용액인 $Carisolv^{TM}$(MediTeam, Sweden)를 사용하고 복합레진을 접착한 후 전단결합강도를 측정함으로써 $Carisolv^{TM}$의 사용이 복합레진의 접착에 미치는 영향을 평가하고자 하였다. 교정치료를 위하여 발거된 상, 하악 소구치 80개와 정상적으로 탈락한 손상이 없이 건전한 상악 유전치 80개의 순, 협면의 상아질을 노출시키고 $Carisolv^{TM}$를 실험군은 60초 적용하고 대조군은 $Carisolv^{TM}$를 사용하지 않았다. 상아질 접착제는 Scotchbond Multi-Purpose(3M, USA), Single Bond(3M, USA), Clearfil SE Bond(Kuraray, Japan), AQ Bond(Sun Medical, Japan)를 각각 제조사의 지시대로 적용하였고 광중합형 복합레진은 Z100(3M, USA)을 사용하였다. $5^{\circ}C$와 $55^{\circ}C$에 각 30초씩 계류시켜 1,000회 열순환시키고 Universal Testing Machine(Zwick Z020, Zwick Co., Germany)을 사용하여 전단결합강도를 측정하고 분석하여 다음과 같은 결론을 얻었다. 1. 각 군간 전단결합강도를 비교한 결과, 유치에 비해 영구치의 전단결합강도가 높게 나타났다. 영구치에서는 Clearfil SE Bond만 사용한 군에서 가장 높았고 $Carisolv^{TM}$와 AQ Bond를 병용한 군에서 가장 낮았다. 2. $Carisolv^{TM}$ 사용하지 않은 군과 사용한 군간의 전단결합강도를 비교한 결과, 영구치와 유치 모두에서 상아질 접착제의 종류에 관계없이 $Carisolv^{TM}$를 사용한 군이 사용하지 않은 군에 비해 전단결합강도가 통계학적으로 유의하게 낮게 나타났다(P<0.001). 3. 상아질 접착제의 종류에 따른 전단결합강도를 비교한 결과, 영구치와 유치 모두에서 Clearfil SE Bond를 사용한 군의 전단결합강도가 가장 높았으며 AQ Bond를 사용한 군의 전단결합강도가 가장 낮았다.

• Restorative Dentistry and Endodontics
• /
• 제44권3호
• /
• pp.23.1-23.9
• /
• 2019

Objectives: The aim of this study was to investigate the microshear bond strength (${\mu}SBS$) of different universal adhesive systems applied to hybrid computer-aided design/computer-aided manufacturing (CAD-CAM) restorative materials repaired with a composite resin. Materials and Methods: Four types of CAD-CAM hybrid block materials-Lava Ultimate (LA), Vita Enamic (VE), CeraSmart (CS), and Shofu Block HC (SH)-were used in this study, in combination with the following four adhesive protocols: 1) control: porcelain primer + total etch adhesive (CO), 2) Single Bond Universal (SB), 3) All Bond Universal (AB), and 4) Clearfil Universal Bond (CU). The ${\mu}SBS$ of the composite resin (Clearfil Majesty Esthetic) was measured and the data were analyzed using two-way analysis of variance and the Tukey test, with the level of significance set at p < 0.05. Results: The CAD-CAM block type and block-adhesive combination had significant effects on the bond strength values (p < 0.05). Significant differences were found between the following pairs of groups: VE/CO and VE/AB, CS/CO and CS/AB, VE/CU and CS/CU, and VE/AB and CS/AB (p < 0.05). Conclusions: The ${\mu}SBS$ values were affected by hybrid block type. All tested universal adhesive treatments can be used as an alternative to the control treatment for repair, except the AB system on VE blocks (the VE/AB group). The ${\mu}SBS$ values showed variation across different adhesive treatments on different hybrid CAD-CAM block types.

• Steel and Composite Structures
• /
• 제44권6호
• /
• pp.803-816
• /
• 2022

Composite materials are effective in forming externally bonded reinforcements which find applications related to existing structures repair, attributed to their high strength-to-weight ratio and ease of installation. Among various composites, fibre reinforced polymers (FRP) have somewhat been largely accepted as a commonly utilized composite for such purposes. It is only recently that steel fibres have been considered as additional members of the FRP fibre family, intuitively termed as steel reinforced polymer (SRP). Owing to its low cost and permissibility of fibre bending at sharp corners, SRP is rapidly becoming a viable contender to other FRP systems. This paper investigates the bond behaviour of SRP-concrete joints with different bonded lengths (50, 75, 100, 150 and 300 mm) and widths (15, 30, 40, 50, and 75 mm) using single-lap shear tests. The experimental specimens contain SRP strips with a fixed density of steel fibres (0.472 cords/mm) bonded to the face of concrete prisms. The load responses were obtained and compared in terms of corresponding load and slip boundaries of the constant region and the peak loads. The failure modes of SRP composites are discussed, and the range of effective bonded length is evaluated herein. In the end, a new analytical model was proposed to estimate the SRP-concrete bond strength using a genetic algorithm, which outperforms 22 existing FRP-concrete bond strength models.

• The Journal of Advanced Prosthodontics
• /
• 제5권2호
• /
• pp.98-103
• /
• 2013

PURPOSE. To evaluate the effects of hydrofluoric acid etching and Er,Cr:YSGG laser irradiation on the shear bond strength of resin cement to lithium disilicate ceramic. MATERIALS AND METHODS. Fifty-five ceramic blocks ($5mm{\times}5mm{\times}2mm$) were fabricated and embedded in acrylic resin. Their surfaces were finished with 1000-grit silicon carbide paper. The blocks were assigned to five groups: 1) 9.5% hydrofluoric-acid etching for 60 s; 2-4), 1.5-, 2.5-, and 6-W Er,Cr:YSGG laser applications for 60 seconds, respectively; and 5) no treatment (control). One specimen from each group was examined using scanning electron microscopy. Ceramic primer (Rely X ceramic primer) and adhesive (Adper Single Bond) were applied to the ceramic surfaces, followed by resin cement to bond the composite cylinders, and light curing. Bonded specimens were stored in distilled water at $37^{\circ}C$ for 24 hours. Shear bond strengths were determined by a universal testing machine at 1 mm/min crosshead speed. Data were analyzed using Kruskal-Wallis and Mann-Whitney U-tests (${\alpha}$=0.05). RESULTS. Adhesion was significantly stronger in Group 2 ($3.88{\pm}1.94$ MPa) and Group 3 ($3.65{\pm}1.87$ MPa) than in Control group ($1.95{\pm}1.06$ MPa), in which bonding values were lowest (P<.01). No significant difference was observed between Group 4 ($3.59{\pm}1.19$ MPa) and Control group. Shear bond strength was highest in Group 1 ($8.42{\pm}1.86$ MPa; P<.01). CONCLUSION. Er,Cr:YSGG laser irradiation at 1.5 and 2.5 W increased shear bond strengths between ceramic and resin cement compared with untreated ceramic surfaces. Irradiation at 6 W may not be an efficient ceramic surface treatment technique.

• 한국자기공명학회논문지
• /
• 제17권1호
• /
• pp.19-23
• /
• 2013

The temperature dependences of the NMR spectrum and the spin-lattice relaxation times in $KH_2PO_4$ were investigated via single-crystal NMR and MAS NMR. The stretched-exponential relaxation that occurred because of the distribution of correlation times was indicative of the degree of the distribution of the double-well potential on the hydrogen bond. The behaviors responsible for the strong temperature dependences of the $^1H$ and $^{31}P$ spin-lattice relaxation times in the rotating frame $T_{1{\rho}}$ in $KH_2PO_4$ are likely related to the reorientational motion of the hydrogen-bond geometry and the $PO_4$ tetrahedral distortion.

• 한국결정학회지
• /
• 제16권1호
• /
• pp.1-5
• /
• 2005

The structure of the title compound has been determined by single-crystal X-ray diffraction work. The crystals are orthorhombic, space group $Pna2_1$ with a=11.095(3), b=21.834(7), c=12.574(4) $\AA$, and R1=0.0667. The average carbon bond length in aromaticity In the molecule is 1.386(1) $\AA$ and the average single bond length linking the central benEene ring and peripheral phenyl rings is 1.491(3) $\AA$. The average dihedral angle between the central benzene ring and each of six peripheral phenyl rings is $67.1(1)^{\circ}$ and the average dihedral angle between neighboring two phenyl rings is $55.0(1)^{\circ}$. Thus the molecule adopts a quasi-propeller configuration with approximate six-fold rotation symmetry.

• 대한화학회지
• /
• 제59권2호
• /
• pp.132-135
• /
• 2015

Bonding force and stiffness in amine-linked single-molecule junctions for Ag electrodes were measured using a home-built conducting atomic force microscope under ambient conditions at room temperature. For comparison, Au electrodes were used to measure the rupture force and stiffness of the molecular junctions. The traces of the force along with the conductance showed a characteristic saw-tooth pattern owing to the breaking of the metal atomic contacts or the metal-molecule- metal junctions. We found the rupture force and stiffness for Ag are smaller than those for Au electrodes. Furthermore, we observed that the force required to break the amine-Ag bond in the conjugated molecule, 1,4-benzenediamine, is smaller than in 1,4-butanediamine which is fully saturated. These results consist with the previous theoretical calculations for the binding energies of the nitrogen bonded to Ag or Au atoms.