Browse > Article
http://dx.doi.org/10.5395/JKACD.2006.31.6.415

AGING EFFECT ON THE MICROTENSILE BOND STRENGTH OF SELF-ETCHING ADHESIVES  

Park, Jin-Seong (Department of Conservative Dentistry, College of Dentistry, Seoul National University)
Kim, Jong-Sun (Department of Conservative Dentistry, College of Dentistry, Seoul National University, Dental Research Institute)
Kim, Min-Su (Department of Conservative Dentistry, College of Dentistry, Seoul National University)
Son, Ho-Hyeon (Department of Conservative Dentistry, College of Dentistry, Seoul National University, Dental Research Institute)
Gwon, Hyeok-Chun (Department of Conservative Dentistry, College of Dentistry, Seoul National University, Dental Research Institute)
Cho, Byeong-Hoon (Department of Conservative Dentistry, College of Dentistry, Seoul National University, Dental Research Institute)
Publication Information
Restorative Dentistry and Endodontics / v.31, no.6, 2006 , pp. 415-426 More about this Journal
Abstract
In this study, the changes in the degree of conversion (DC) and the microtensile bond strength (MTBS) of self-etching adhesives to dentin was investigated according to the time after curing. The MTBS of Single Bond (SB, 3M ESPE, USA), Clearfil SE Bond (SE, Kuraray, Japan), Xeno-III (XIII, Dentsply, Germany), and Adper Prompt (AP, 3M ESPE, USA) were measured at 48h, at 1 week and after thermocycling for 5,000 cycles between 5$^{\circ}$C and 55$^{\circ}$C. The DC of the adhesives were measured immediately, at 48h and at 7 days after curing using a Fourier Transform Infra-red Spectrometer. The fractured surfaces were also evaluated with scanning electron microscope. The MTBS and DC were significantly increased with time and there was an interaction between the variables of time and material (MTBS, 2-way ANOVA, p = 0.018; DC, Repeated Measures ANOVA, p < 0.001). The low DC was suggested as a cause of the low MTBS of self-etching adhesives, XIII and AP, but the increase in the MTBS of SE and AP after 48h could not be related with the changes in the DC. The microscopic maturation of the adhesive layer might be considered as the cause of increasing bond strength.
Keywords
Self-etching adhesive; Microtensile bond strength; Degree of conversion; Brittle fracture; Aging;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Tantbirojn D, Cheng YS, Versluis A, Hodges JS, Douglas WH. Nominal shear or fracture mechanics in the assessment of composite-dentin adhesion? J Dent Res 79:41-48,2000   DOI   ScienceOn
2 Inoue S, Vargas MA, Abe Y, Yoshida Y, Lambrechts P, Vanherle G, Sana H, Van Meerbeek B. Microtensile bond strength of eleven contemporary adhesives to dentin. J Adhesive Dent 3:237-245, 2001
3 Inoue S, Vargas MA, Abe Y, Yoshida Y, Lambrechts P, Vanherle G, Sano H, Van Meerbeek B. Microtensile bond strength of eleven contemporary adhesives to enamel. Am J Dent 16:329-334, 2003
4 Hashimoto M, Ohno H, Kaga M, Endo K, Sano H, Oguchi H. In vivo degradation of resin-dentin bonds in humans over 1 to 3 years. J Dent Res 79:1385-1391, 2000   DOI   ScienceOn
5 Ferracane JL, Greener EH. Fourier transform infrared analysis of degree of polymerization in unfilled resins - methods comparison. J Dent Res 63:1093-1095,1984   DOI   ScienceOn
6 Perdigao J, Lopes M, Geraldeli S, Lopes GC, Garcia-Godoy F. Effect of a sodium hypochlorite gel on dentin bonding. Dent Mater 16:311-323, 2000   DOI   ScienceOn
7 Lin C, Douglas WH. Failure mechanisms at the hyman dentin-resin interface: a fracture mechanics approach. J Biomech 27:1037-1047, 1994   DOI   ScienceOn
8 Carvalho RM, Chersoni S, Frankenberger R, Pashley DH, Prati C, Tay FR. A challenge to the conventional wisdom that simultaneous etching and resin infiltration always occurs in self-etch adhesives. Biomaterials 26: 1035-1042, 2005   DOI   ScienceOn
9 Tay FR, Pashley DH. Have dentin adhesives become too hydrophilic? Review. J Can Dent Assoc 69: 726-731, 2003
10 Hashimoto M. Ohno H. Sano H, Tay FR. Kaga M, Kudou Y, Oguchi H, Araki Y. Kubota M. Micromorphological changes in resin-dentin bonds after 1 year of water storage. J Biomed Mater Res 63: 306-311. 2002   DOI   ScienceOn
11 Gale MS, Darvell BW. Thermal cycling procedures for laboratory testing of dental restorations. J Dent 27:89-99. 1999   DOI   ScienceOn
12 정문경, 조병훈, 손호현, 엄정문, 한영철, 정세준. Effect of additional coating of bonding resin on the microtensile bond strength of self-etching adhesives to dentin. 대한치과보존학회지 31: 103-112, 2006   과학기술학회마을   DOI
13 Uno S, Finger WJ. Function of the hybrid zone as a stress-absorbing layer in resin-dentin bonding. Quintessence Int 26:733-738, 1995
14 Kim JS, Choi YH, Cho BH, Son HH, Lee lB, Urn CM, Kim CK. The effect of light-cure time of adhesive resin on the thickness of the oxygen inhibited layer and the micro-tensile bond strength to dentine. J Biomed Mater Res Part B: Appl Biomater 78B (1): 115-123, 2006   DOI   ScienceOn
15 Miyazaki M, Hirohata N, Takagaki K. Onose H, Moore BK. Influence of self-etching primer drying time on enamel bond strength of resin composites. J Dent 27:203-207,1999   DOI   ScienceOn
16 Asmussen E. Peutzfeldt A. Short- and Long-term bonding efficacy of a self-etching, one-step adhesive. J Adhes Dent 5:41-45,2003
17 Imazato S, McCabe JF, Tarumi H. Ehara A. Ebisu S. Degree of conversion of composites measured by DTA and FTIR. Dent Mater 17: 178-183, 2001   DOI   ScienceOn
18 Tay FR. Gwinnett JA, Wei SH. The overwet phenomenon in two-component acetone-based primers containing aryl amine and carboxylic acid monomers. Dent Mater 13:118-127,1997   DOI   ScienceOn
19 Yoshida K. greener EH. Effects of two amine reducing agents on the degree of conversion and physical properties of an unfilled light-cured resin. Dent Mater 9:246-251. 1993   DOI   ScienceOn
20 Sano H, Takatsu T, Ciucchi B, Horner JA, Matthews WG, Pashley DH. Nanoleakage: leakage within the hybrid layer. Oper Dent 20: 18-25, 1995
21 Tay FR, Carvalho R, Sano H, Pashley DH. Effect of smear layers on the bonding of a self-etching primer to dentin. J Adhes Dent 2:99-116.2000
22 Nakabayashi N, Kojima K, Masuhara E. The promotion of adhesion by the infiltration of monomers into tooth substrates. J Biomed Mater Res 16:265-273, 1982   DOI   ScienceOn
23 Van Meerbeek B, Willems G, Celis JP, Roos JR, Braem M, Lambrechts P, Vanherle G. Assessment by nanoindentation of the hardness and elasticity of the resindentin bonding area. J Dent Res 72:1434-1442, 1993   DOI   ScienceOn
24 Armstrong SR. Keller JC, Boyer DB. Mode of failure in the dentin-adhesive resin-resin composite bonded joint as determined by strength-based ($\mu$TBS) and fracturebased (CNSB) mechanical testing. Dent Mater 17:201-210, 2001   DOI   ScienceOn
25 Meiers JC, Young D. Two-year composite/dentin bond stability. Am J Dent 14:141-144,2001
26 Pioch T, Stotz S, Buff E, Duschner H. Staehle HJ Influence of different etching times on hybrid layer formation and tensile bond strength. Am J Dent 11: 202-206, 1998
27 Dickens SH. Cho BH. Interpretation of bond failure through conversion and residual solvent measurements and Weibull analyses of flexural and microtensile bond strengths of bonding agents. Dent Mater 21(4): 354-364, 2005   DOI   ScienceOn
28 Cho BH. Dickens SH. Effects of the acetone content of single solution dentin bonding agents on the adhesive layer thickness and the microtensile bond strength. Dent Mater 20: 107-115, 2004   DOI   ScienceOn
29 Sanares AM, Itthagarun A, King NM, Tay FR, Pashley DH. Adverse surface interactions between one-bottle light-cured adhesives and chemical-cured composites. Dent Mater 17: 542-556, 2001   DOI   ScienceOn
30 Sano H, Yoshikawa T, Pereira PN, Kanemur N, Morigami M, Tagami J, Pashley DH. Long-term durability of dentin bonds made with a self-etching primer, in vivo. J Dent Res 78:906-911, 1999   DOI   ScienceOn
31 Tay FR, Pashley DH, Suh BI, Carvalho RM, Itthagarun A. Single-step adhesives are permeable membranes. J Dent 30:371-382, 2002   DOI   ScienceOn
32 Lambrechts P, Vanherle G, Microtensile bond strengths of one- and two-step self-etch adhesives to bur-cut enamel and dentin. Am J Dent 16:414-420. 2003
33 Yoshiyama M, Carvalho R, Sano H, Horner J, Brewer PD, Pashley DH. Interfacial morphology and strength of bonds made to superficial versus deep dentin. Am J Dent 8:297-302, 1995
34 Miyazaki, S, Iwasaki, K. Onose H, and Moore BK. Enamel and dentin bond strengths of single application bonding systems. Am J Dent 14:361-366, 2001
35 Pashley DH, Ciucchi B, Sano H, Horner JA. Permeability of dentin to adhesive agents. Quintessence Int 24:618631. 1993
36 Hashimoto M, Ohno H, Sano H, Kaga M, Oguchi H. Degradation patterns of different adhesives and bonding procedures. J Biomed Mater Res 66B:324-330, 2003   DOI
37 Wilder AD Jr., Swift EJ Jr., May KN Jr., Waddell SL. Bond strengths of conventional and simplified bonding systems. Am J Dent 11:114-117,1998
38 Sano H. Takatsu T, Ciucchi B, Russell CM, Pashley DH. Tensile properties of resin-infiltrated demineralized human dentin. J Dent Res 74:1093-1102, 1995   DOI   ScienceOn
39 Suh BI, Feng L, Pashley DH, Tay FR. Factors contributing to the incompatibility between simplified-step adhesives and chemically cured or dual-cured composites. Part III. Effect of acidic resin monomers. J Adhes Dent 5:267-282, 2003
40 Chersoni S, Suppa P, Grandini S, Goracci C, Monticelli F, Yiu C, Huang C, Prati C, Breschi L, Ferrari M, Pashley DH, Tay FR. In vivo and in vitro permeability of one-step self-etch adhesives. J Dent Res 83:459-464,2004   DOI   ScienceOn
41 Choi KK, Condon JR, Ferracane JL. The effects of adhesive thickness on polymerization contraction stress of composite. J Dent Res 79:812-817, 2000   DOI   ScienceOn
42 Frankenberger R. Perdigao J, Rosa BT, Lopes M. 'No-bottle' vs 'multi-bottle' dentin adhesives - a microtensile bond strength and morphological study. Dent Mater 17:373-380, 2001   DOI   ScienceOn
43 Burrow MF, Takakura H. Nakajima M, Inai N, Tagarni J, Takatsu T. The influence of age and depth of dentin on bonding. Dent Mater 10:241-246, 1994   DOI   ScienceOn
44 Dunn WJ, Soderholm KM. Comparison of shear and flexural bond strength tests versus failure modes of dentin bonding systems. Am J Dent 14:297-303,2001
45 Perdigao J, May KN Jr, Wilder AD Jr, Lopes M. The effect of depth of dentin demineralization on bond strengths and morphology of the hybrid layer. Oper Dent 25:186-194,2000
46 Wakefield CW, Draughn RA, Sneed WD, Davis TN, Shear bond strengths of six bonding systems using the pushout method of in vitro testing, Oper Dent 23:6976, 1998