• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.10 no.2
• /
• pp.57-62
• /
• 1992

As population is increased, land use types are changed mountainous areas from flatland in Korea. Because natural disaster as landslides occur of life, property, and environmental damage, prediction of landslides have become increasingly important. We focus on the issue for assessment of landslides, not slope stability analysis for a simple slope site. In this study, we could know the correlations of mean, standard deviation for brightness value of imagery by aerial photo scanning. The range of brightness values and standard deviation of landslide area is 35~65 and tend to increment of value, in the every years. When evaluating large regions with past occurrence of landslides, it is possible to search for correlation of site conditions such as degree of slope, soil characteristics, vegetative cover, and rainfall conditions in aerial photo interpretation data.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.782-784
• /
• 2013

As digital image processing technologies are developing, edges are being utilized in various areas. In the existing edge detection methods, there are mask methods which utilize Sobel, Prewitt, Roberts, Laplacian operator etc. To realize these existing edge detection methods is simple. But, in case that AWGN(additive white Gaussian noise) added images are processed, edge detection characteristics are slightly insufficient. Therefore, the edge detection algorithm using the standard deviation of local mask was suggested in this paper to compensate for the drawbacks in the existing detection methods and the suggested algorithm in AWGN environments showed excellent edge detection characteristics.

• Korean Journal of Remote Sensing
• /
• v.9 no.1
• /
• pp.1-19
• /
• 1993

A simple bispectral threshold technique which reflects the temporal and spatial characteristics of the analysis area has been developed to classify the cloud type and estimate the cloud cover from GMS/S-VISSR(Stretched Visible and Infrared Spin Scan Radiometer) imagery. In this research, we divided the analysis area into land and sea to consider their different optical properties and used the same time observation data to exclude the solar zenith angle effects included in the raw data. Statistical clear sky radiance(CSRs) was constructed using maximum brightness temperature and minimum albedo from the S-VISSR imagery data during consecutive two weeks. The CSR used in the cloud anaysis was updated on the daily basis by using CSRs, the standard deviation of CSRs and present raw data to reflect the daily variation of temperature. Thresholds were applied to classify the cloud type and estimate the cloud cover from GMS/S-VISST imagery. We used a different thresholds according to the earth surface type and the thresholds were enough to resolve the spatial variation of brightness temperature and the noise in raw data. To classify the ambiguous pixels, we used the time series of 2-D histogram and local standard deviation, and the results showed a little improvements. Visual comparisons among the present research results, KMA's manual analysis and observed sea level charts showed a good agreement in quality.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.9
• /
• pp.3055-3060
• /
• 2012

A simple, rapid and sensitive spectrofluorometric method was developed for the determination of folic acid (FA), based on its quenching effect on the fluorescence intensity of enoxacin (ENX)-europium ($Eu^{3+}$) complex as a fluorescent probe. Fluorometric interaction between ENX-$Eu^{3+}$ complex and FA was studied using UV-visible and fluorescence spectroscopy. The quenched fluorescence intensity at an emission wavelength of 614 nm was proportional to the concentration of FA. Optimum conditions for the determination of FA were investigated. Under optimal conditions, the reduced fluorescence intensity at 614 nm was responded linearly with the concentration of FA. The linearity was maintained in the range of $1.25{\times}10^{-9}$ to $1.50{\times}10^{-7}$ M (R = 0.9986) with the limit of detection ($3S_b/m$) (where $S_b$ is the standard deviation of blank and m is the slop of linear calibration curve) of $6.94{\times}10^{-10}$ M. The relative standard deviation (RSD) for 9 repeated measurements of $1.0{\times}10^{-9}$ M FA was 1.42%. This method was simple, cost effective, and relatively free of interference from coexisting substances. Successful determinations of FA in pharmaceutical formulation and biological samples with the developed method were demonstrated.

• Journal of the Korean Society of Safety
• /
• v.36 no.2
• /
• pp.32-38
• /
• 2021

This paper suggests an approach to evaluate the reliability of an intelligent power module with information deficiency of prior distribution and the characteristics of censored data through Bayesian statistics. This approach used a prior distribution of Bayesian statistics using the lifetime information provided by the manufacturer and compared and evaluated diffuse prior (vague prior) distributions. To overcome the computational complexity of Bayesian posterior distribution, it was computed with Gibbs sampling in the Monte Carlo simulation method. As a result, the standard deviation of the prior distribution developed using simple information was smaller than that of the posterior distribution calculated with the diffuse prior. In addition, it showed excellent error characteristics on RMSE compared with the Kaplan-Meier method.

• Mass Spectrometry Letters
• /
• v.14 no.2
• /
• pp.36-41
• /
• 2023

A simple method was developed to determine residual p-arsanilic acid (ASA), an organo-arsenic compound used as a feed additive, in aquatic products (eel, halibut, and shrimp) using EDTA-assisted solvent extraction and LC-MRM. The method was successfully validated in terms of specificity, linearity (coefficient of determination ≥ 0.995), accuracy (recovery or R, 72.72-78.73%), precision (the relative standard deviation of R, 2.08-6.98%), and sensitivity (the lower limit of quantitation, 5 ppb) according to CODEX guidelines (CAC-GL 71-2009). The use of EDTA in the extraction solvent and water with a suitable pH modifier as the reconstitution solvent may be the key factors for successful results. This is the first method that can be used for monitoring residual ASA in aquatic products using LC-MRM and could contribute to establishing a better aquatic product safety management system.

• Journal of Food Hygiene and Safety
• /
• v.10 no.3
• /
• pp.169-174
• /
• 1995

Piperine, component of pure ground black pepper, has strong stimulative and hot. Analytical method for piperine was developed by high performance liquid chromatography. Analytical conditions are as follows, mobile phase is 70% methanol, detector UV 343 nm (0.05 AuFs), column is Novapak 5 C18 (15 cm $\times$ 4.6mm), flow rate is 1.0ml/min, chart speed is 0.25 cm/min and injection volume is 20 ul. Analytical results are as follows that relative standard deviation is 1.15%, calibration curve is y=170473.1x-7848.5 (R2=0.999) that shows good linearity. Standard solution of piperine is stable up to 10 hr and content of piperine in pureground black pepper is 4.97$\pm$0.86% Retention time of piperine in HPLC method is about 7 min. Therefore, the developed HPLC method including simple pretreatment of sample will be contribute to quality mangement.

• Journal of Korea Water Resources Association
• /
• v.56 no.12
• /
• pp.969-980
• /
• 2023

Since the 2000s, ensemble streamflow prediction (ESP) has been actively utilized in South Korea, primarily for hydrological forecasting purposes. Despite its notable success in hydrological forecasting, the original objective of enhancing water resources system management has been relatively overlooked. Consequently, this study aims to demonstrate the utility of ESP in water resources management by creating a simple hypothetical exercise for dam operators and applying it to actual multi-purpose dams in South Korea. The hypothetical exercise showed that even when the means of ESP are identical, different costs can result from varying standard deviations. Subsequently, using sampling stochastic dynamic programming (SSDP) and considering the capacity-inflow ratio (CIR), optimal release patterns were derived for Soyang Dam (CIR = 1.345) and Chungju Dam (CIR = 0.563) based on types W and P. For this analysis, Type W was defined with standard deviation equal to the mean inflow, and Type P with standard deviation ten times of the mean inflow. Simulated operations were conducted from 2020 to 2022 using the derived optimal releases. The results indicate that in the case of Dam Chungju, more aggressive optimal release patterns were derived under types with smaller standard deviations, and the simulated operations demonstrated satisfactory outcomes. Similarly, Soyang Dam exhibited similar results in terms of optimal release, but there was no significant difference in the simulation between types W and P due to its large CIR. Ultimately, this study highlights that even with the same mean values, the standard deviation of ESP impacts optimal release patterns and outcomes in simulation. Additionally, it underscores that systems with smaller CIRs are more sensitive to such uncertainties. Based on these findings, there is potential for improvements in South Korea's current operational practices, which rely solely on single representative values for water resources management.

• Textile Coloration and Finishing
• /
• v.17 no.4 s.83
• /
• pp.21-26
• /
• 2005

A combination separation system is composed of three parts, simple microfiltration unit for the pretreatment of real waste IPA, pervaporation unit with plate and frame type module(the effective membrane area 9,040$cm^2$), and simple ultrafiltration unit as a refiner. Utrafiltration module with hollow fiber membrane(MWCO 10,000) used to purify waste aqueous IPA solution. In addition, the flux of $CMPA-K^+$ composite membrane for waste aqueous IPA solution was very steady-state with long experiment time(30 days). And the standard deviation($\sigma$) was 0.152 and then the coefficient of variation($CV\%$)was 10.82 The IPA concentration on the membrane performance using pervaporation module system could be increased from $89.85wt(\%)$ to more than $99.90wt\%$ in about 8hr at operation temperature of $70^{\circ}C$ using the pervaporation module system. Therefore, a combination separation process system of simple filtration and pervaporation was very effective for the purpose of the IPA purification and reuse front industrial electronic components cleaning process.

• Industrial Engineering and Management Systems
• /
• v.6 no.2
• /
• pp.94-105
• /
• 2007

Measurement technology plays an important role in discrete manufacturing industry. Probe-type coordinate measuring machines (CMMs) are normally used to capture the geometry of part features. The measured points are then fit to verify a specified geometry by using the least squares method (LSQ). However, it occasionally overestimates the tolerance zone, which leads to the rejection of some good parts. To overcome this drawback, minimum zone approaches defined by the ANSI Y14.5M-1994 standard have been extensively pursued for zone fitting in coordinate form literature for such basic features as plane, circle, cylinder and sphere. Meanwhile, complex features such as torus have been left to be dealt-with by the use of profile tolerance definition. This may be impractical when accuracy of the whole profile is desired. Hence, the true deviation model of torus is developed and then formulated as a minimax problem. Next, a relatively new and simple population based evolutionary approach, particle swarm optimization (PSO), is applied by imitating the social behavior of animals to find the minimum tolerance zone torusity. Simulated data with specified torusity zones are used to validate the deviation model. The torusity results are in close agreement with the actual torusity zones and also confirm the effectiveness of the proposed PSO when compared to those of the LSQ.