• Steel and Composite Structures
• /
• 제22권4호
• /
• pp.745-752
• /
• 2016

An investigation has been done to study the evolution of the microstructure, mechanical and electrical properties of AlMgSi alloy destined for the transport of electric energy, in function of the deformation caused by the cold drawing process. We identified that drawing of aluminum wire causes development of a fibrous texture of type <111> and <100>. We notice also that the electrical resistivity and mechanical resistance increases with the increasing of the deformation level. Characterization methods used in this work is: The Electron Back Scattered Diffraction EBSD, X-Ray diffraction, Vickers microhardness, Tensile test, Measuring electrical resistivity, the Scanning Electron Microscope (SEM) and Energy Diffraction Spectrum (EDS).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.88-90
• /
• 2005

Boron Phosphide films were deposited on (111) Si substrate at 650 $^{\circ}C$, by the reaction of $B_2H_6$ with $PH_3$ using APCVD. $N_2$ was carried out as carrier gas. The optimal gas rates were 20 m$\ell$/min for $B_2H_6$, 60 m$\ell$/min for $PH_3$ and 1 $\ell$/min for $N_2$. After as grown the films were insitu annealed for 1hour in N$_2$ ambient at $550^{\circ}C$ and measured. The measurement of AFM shows that the RMS is $29.626{\AA}$ for the reaction temperature at 650$^{\circ}C$. The measurement of XRD shows that the films have the orientation of (101). Also, the measurement of AES is shown that the films have $B_{13}P_2$ stoichiometry.

• 대한공간정보학회지
• /
• 제18권1호
• /
• pp.111-118
• /
• 2010

본 논문에서는 도시용수의 효율적인 관리 상 문제점을 파악하고 이를 개선하는 방안을 제시하는데 목적을 두었다. 데이터 모니터링부터 정보화과정 까지를 포함하는 실시간 모니터링 기법을 통해 센싱 데이터를 취득하고 데이터 분석을 통해 용수사용 예측행정에 도움이 되는 일련의 방법론을 제시했다. 또한 센싱 데이터 중 일부 샘플자료를 사용하여 다항식모형을 이용한 추세분석을 실시했다. 연구결과 제시된 실시간 모니터링 기법 및 분석결과는 도시용수 건전성 향상을 위해 중요한 정보제공을 할 것으로 기대된다.

• 한국수산과학회지
• /
• 제52권6호
• /
• pp.745-751
• /
• 2019

Seasonal variation in species composition of fishes in the Sannam reservoir in Changwon, Korea was determined using samples collected by a three-sided fyke net in 2018. During the study period, we collected 2,181 individuals of 9 species, with a total weight of 111,552.2 g. The dominant species were Lepomis macrochirus, Carassius carassius, Erythroculter erythropterus, and Cyprinus carpio. These species accounted for 96.1% of the total number of individuals. The number of fish species, number of individuals, biomass and species diversity indices fluctuated with the seasons. The peak number of fish species occurred in May and August, the biomass of fishes was highest in May. Whereas the number of individuals was highest in February.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.326-326
• /
• 2012

ZnS를 합성하는 방법 중 thioacetamide (TAA)를 녹인 물에 ZnO template를 넣어서 황화시키는 방법이 있다. 이 방법은 실험과정이 간편할 뿐만 아니라 그 반응양의 조절도 용이해 ZnS-ZnO core-shell 구조나 ZnS hollow 구조 등을 만드는데 널리 사용되고 있다. 그러나 다양한 형태의 ZnS 구조체 합성에 관한 연구는 활발한 반면, ZnS의 상형성 과정이나 구조 변화와 같은 ZnO의 황화 과정 기구에 관한 연구는 매우 미비한 실정이다. ZnS는 기본적으로 저온에서는 cubic sphalerite 구조를, 고온에서는 hexagonal wurtzite 구조를 안정상으로 가진다. 또한, 8H나 15R 등과 같은 다양한 polytype 구조도 존재한다. 그러나 다양한 구조에서 비슷한 면간거리가 존재하기 때문에 결정구조의 분석이 어려운 실정이다. 이러한 비슷한 면간거리를 가지는 ZnS 등의 결정구조 분석에 있어 원자배열을 직접적으로 관찰할 수 있는 투과전자현미경 (TEM, transmission electron microscopye)을 이용한 연구는 큰 강점을 가진다. 본 연구에서는 다공성 ZnO 막을 황화시켜 형성된 ZnS 막의 미세구조 특성을 분석하였다. 다공성 ZnO 막은 패턴된 Si (111) 기판 위에 스핀코팅법을 이용하여 4,000 rpm의 속도로 증착되었으며 ZnO 결정화를 위해 150 도와 500도에서 각각 drying과 후열처리를 수행하였다. 이렇게 만들어진 ZnO 막을 TAA를 녹인 물에 넣어 48 시간 동안 반응시켰고 최종적으로 ZnS 막을 생성하였다. 다공성 ZnS 막의 미세구조를 분석하기 위해 주사전자현미경 (SEM, scanning electron microscope), X-선 회절분석기 (XRD, x-ray diffractometer), 그리고 투과전자현미경을 이용하였으며, 정확한 결정구조 분석을 위하여 결정구조 시뮬레이션을 병행하였다.

• 한국재료학회지
• /
• 제20권2호
• /
• pp.65-71
• /
• 2010

In this study, the effect of Sn and Mg on microstructure and mechanical properties of Cu-Fe-P alloy were investigated by using scanning electron microscope, transmission electron microscope, tensile strength, electrical conductivity, thermal softening, size and distribution of the precipitation phases in order to satisfy characteristic for lead frame material. It was observed that Cu-0.14wt%Fe-0.03wt%P-0.05wt%Si-0.1wt%Zn with Sn and Mg indicates increasing tensile strength compare with PMC90 since Sn restrained the growth of the Fe-P precipitation phase on the matrix. However, the electrical conductivity was decreased by adding addition of Sn and Mg because Sn was dispersed on the matrix and restrained the growth of the Fe-P precipitation. The size of 100 nm $Mg_3P_2$ precipitation phase was observed having lattice parameter $a:12.01{\AA}$ such that [111] zone axis. According to the results of the study, the tensile strength and the electrical conductivity satisfied the requirements of lead frame; so, there is the possibility of application as a substitution material for lead frame of Cu alloy.

• Journal of Magnetics
• /
• 제8권1호
• /
• pp.32-35
• /
• 2003

Magnetic funnel Junctions (MTJs) were fabricated on thermally oxidized Si (100) wafers using DC magnetron sputtering. The film Structures were Ta(50 ${\AA}$)/CU(100 ${\AA}$)$Ni_{80}Fe_{20}(20 $ ${\AA}$)/Cu(50 ${\AA}$)/$Mn_{75}Ir_{25}(100 $ ${\AA}$)/$Co_{70}Fe_{30}(25$ ${\AA}$)/Al-O(15 ${\AA}$)/$Co_{70}Fe_{30}(25 $ ${\AA}$)/$Ni_{80}Fe_{20}(t)/Ta(50 $ ${\AA}$), with t=0 ${\AA}$, 100 and 1000 ${\AA}$, respectively. X-ray diffraction has shown improvement of (111) texture of IrMn$_3$ and Cu by annealing. The exchange-biased energy is almost inversely proportional to temperature. The difference between the coercivity H$_c$ and the exchange biased field H$_E$ for t = 0 $_3$ sample is smaller than that for t = 1000 ${\AA}$. For the pinned layer, the decreasing rate of the coercivity with the temperature is higher compared to that of the exchange field, but variation of H$_c$ is similar to that of the exchange field for free layer.

• 한국한의학연구원논문집
• /
• 제15권2호
• /
• pp.111-117
• /
• 2009

We intended to identify the health state of Oriental medical students and also to know how many things of health practice are in healthy group and non-healthy group classified by the THI average score, according to sasang constitution. We collected data with self-administered health questionnaires from 297 men and women, in 9 Korea oriental medical colleges. We diagnosed Sasang constitution using QSCC II and also estimated health degree using THI. Non-healthy group practiced much more health behaviors than healthy one, and there were significant difference in Taeeumin and Soeumin. Non-healthy group of Taeeumin, Soeumin and Soyangin all practiced much more constitutional health behaviors than healthy one, and Soeumin non-healthy and healthy one all practiced much less health behaviors than Taeeumin and Soyangin group. Non-healthy group practiced health behavior for health care and maintenance more than healthy-one, and health state was related with sasang constitution health care. Therefore, institutional and systematic environmental condition would be needed in practicing healthy behaviors for improving the quality of health, and especially developed health promotion programs according to Sasang constitution too.

• 복식문화연구
• /
• 제6권3호
• /
• pp.111-125
• /
• 1998

What human beings wear is closely related to how they conceptualize their bodies and how they classify the group they belong to and the way they wear their cloth s an important cultural element that shows wearers' awareness and social relationship. Especially, underclothes reflect unrevealed cultural inside of the society more abundantly than outer wear do. Through such characteristics of underclothes, we are able to better understand inherent order of culture. This study si to understand the characteristics and changes of Korean culture by reviewing the convention of underclothes wearing that takes important role in clothing without being explicitly revealed. For this study, in addition to biblical review of under clothes of traditional societies, a total of 301 college students aging from 19 to 28, who are the most open to accepting new cultures and changes, residing in Seoul area were participant. Questionnaire consists of open-ended questions of underclothes terms, kinds, why they wear, items of wearing, how they obtained, how they take care of, etc. In conclusion, changes in cultural meaning of underclothes analyzed through convention of underclothes wearing are as follows; 1) changes in wearing pattern implies changes in functions of underclothes and changes in members' roles and values in a society; 2) changes in recognition of underclothes are related to the changes in awareness of sex; 3) consumer behaviour of underclothes represents a part of information culture; 4) changes in the pattern of maintaining underclothes show that differentiation of sex role in household tasks is decreased.

• 한국세라믹학회지
• /
• 제49권6호
• /
• pp.556-560
• /
• 2012

Nanocrystalline CrN coatings were deposited by DC and ICP-assisted magnetron sputtering on Si (100) substrates. The influences of the ICP power on the microstructural and crystallographic properties of the coatings were investigated. For the generation of the ICP, radio frequency was applied using a dielectric-encapsulated coil antenna installed inside the deposition chamber. As the ICP power increased from 0 to 500W, the crystalline grain size decreased. It is believed that the decrease in the crystal grain size at higher ICP powers is due to resputtering of the coatings as a result of ion bombardment as well as film densification. The preferential orientation of CrN coatings changed from (111) to (200) with an increase in the ICP power. The ICP magnetron sputtering CrN coatings showed excellent surface roughness compared to the DC magnetron sputtering coatings.