• Maritime Security
• /
• v.1 no.1
• /
• pp.241-271
• /
• 2020

The military technology currently receiving the most attention is the hypersonic missile. hypersonic is faster than the speed of sound or Mach 5+. The vast majority of the ballistic missiles that it inspired achieved hypersonic speeds as they fell from the sky. Rather than speed, today's renewed attention to hypersonic weapons owes to developments that enable controlled flight. These new systems have two sub-varieties: hypersonic glide vehicles and hypersonic cruise missiles. Hypersonic weapons could challenge detection and defense due to their speed, maneuverability, and low altitude of flight. The fundamental question of this study is: 'What effect will the hypersonic missile have on the maritime strategy?' It is quite prudent to analyze and predict the impact of technology in the development stage on strategy in advance. However, strategy is essential because it affect future force construction. hypersonic missiles act as a limiting factor in securing sea control. The high speed and powerful destructive power of the hypersonic missile are not only difficult to intercept, but it also causes massive ship damage at a single shot. As a result, it is analyzed that the Securing sea control will be as difficult as the capacity of sea denial will be improved geographically and qualitatively. In addition, the concept of Fortress Fleet, which was criticized for its passive strategy in the past, could be reborn in a modern era. There are maritime power projection/defence, SLOC attack/defence in exploiting sea control. The effects of hypersonic missiles on exploiting sea control could be seen as both limiting and opportunity factors.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.16 no.1
• /
• pp.44-53
• /
• 2006

This study purposed to investigate air pollution in car shipping yards and, for this purpose, we selected an outdoor open-air yard and an indoor ramp into the ship and measured the concentrations of sulfur dioxide, nitrogen dioxide, carbon monoxide, PM10, PM2.5 and heavy metals in the air. The results of this study are as follows. No significant difference was observed in temperature and humidity between the outdoor and indoor workshop, and the average air flow was 0.52 m/s in the indoor workshop, which is higher than 0.19 m/s in the outdoor workshop(p<0.01). The average concentrations of sulfur dioxide, nitrogen dioxide, carbon monoxide, PM10 and PM2.5 according to workplace were 0.03 ppm(${\pm}0.01$), 0.03 ppm(${\pm}0.01$), 0.46 ppm(${\pm}0.22$), $39.44{\mu}g/m^3$(${\pm}2.45$) and $5.45{\mu}g/m^3$(${\pm}1.15$) respectively in the outdoor workshop, and 0.15 ppm(${\pm}0.05$), 0.22 ppm(${\pm}0.06$), 8.85 ppm(${\pm}3.35$), $236.39{\mu}g/m^3$(${\pm}58.21$) and $152.43{\mu}g/m^3$(${\pm}35.42$) respectively in the indoor workshop. Thus, the concentrations of gaseous substances in the indoor workshop were 4.9-19.2 times higher than those in the outdoor workshop, and the concentrations of fine dusts were 5.9-27.9 times higher(p<0.01). In addition, according to the result of investigating pollutant concentrations according to displacement and the number of car loaded when shipping gasoline cars into the ship, no significant relation between the number of cars loaded and pollutants was observed in shipping passenger cars, but the concentrations of nitrogen dioxide and carbon monoxide got somewhat higher with the increase of the number of cars loaded(p<0.05). In addition, the concentrations of nitrogen dioxide, carbon monoxide, PM10 and PM2.5 in the air were significantly higher when shipping recreational vehicles, the displacement of which is larger than passenger cars, than when shipping passenger cars(p<0.01). On the other hand, the average heavy metal concentrations of the air in indoor workshop were: lead $-0.05{\mu}g/m^3$(${\pm}0.10$); chromium $-0.90{\mu}g/m^3$(${\pm}0.18$); zinc $-0.38{\mu}g/m^3$(${\pm}0.24$); copper $-0.18{\mu}g/m^3$(${\pm}0.22$); and manganese and cadmium not detected. In addition, the complaining rates of 'asthma,' a major symptom of chronic respiratory diseases, were 18.5% and 22.5% respectively in indoor workers and outdoor workers. Thus the rate was somewhat higher in indoor workers but the difference was not statistically significant. The complaining rates of 'chronic cough' and 'chronic phlegm' were very low and little different between indoor and outdoor workers. The results of this study show that the reason for the higher air pollution in indoor than in outdoor workshop is incomplete combustion of fuel due to sudden start and over-speed when cars are driven inside the ship. In order to prevent high air pollution, efficient management measures should be taken including the observance of the optimal speed, the improvement of old ships and the installation of efficient ventilation system.

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.344-347
• /
• 2008

Ocean surface waves may be modified by ocean current and their observation may be severely distorted if the observer is on a moving platform with changing speed. Tidal current near a sill varies inversely with the water depth, and results spatially inhomogeneous modulation on the surface waves near the sill. For waves propagating upstream, they will encounter stronger current before reaching the sill, and therefore, they will shorten their wavelength with frequency unchanged, increase its amplitude, and it may break if the wave height is larger than 1/7 of the wavelength. These small scale (${\sim}$ 1 km changes is not suitable for satellite radar observation. Spatial distribution of wave-height spectra S(x, y) can not be acquired from wave gauges that are designed for collecting 2-D wave spectra at fixed locations, nor from satellite radar image which is more suitable for observing long swells. Optical images collected from cameras on-board a ship, over high-ground, or onboard an unmanned auto-piloting vehicle (UAV) may have pixel size that is small enough to resolve decimeter-scale short gravity waves. If diffuse sky light is the only source of lighting and it is uniform in camera-viewing directions, then the image intensity is proportional to the surface reflectance R(x, y) of diffuse light, and R is directly related to the surface slope. The slope spectrum and wave-height spectra S(x, y) may then be derived from R(x, y). The results are compared with the in situ measurement of wave spectra over Keelung Sill from a research vessel. The application of this method is for analysis and interpretation of satellite images on studies of current and wave interaction that often require fine scale information of wave-height spectra S(x, y) that changes dynamically with time and space.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.159-163
• /
• 2005

Marine accidents of 70.9% have been caused by small ships less than 100 tons in the past 5 years(1998${\sim}$2002). This is ascribable to the graying and lack in expertise on shipping of small ship operators, and merchant ships are hindered from coastal navigation due to the increase of coastal fishing boats and liners. Currently, ECDIS and GPS Plotters are widely used as navigation equipment providing route information to operators, but it can not give any function of automatic route creation and route explanation, so they are available only experienced operators. Especially, the present situation is that no study is made of the automatic route creation and route explanation using ENC for ECDIS, substitution system of paper chart. In this paper, Navigation Guiding System(NGS) is proposed to generate an optimal route where ENC and GPS data is fusioned including the wind speed and direction of anemometer. The proposed system was testified by a simulation, and its effectiveness was verified.

• Journal of Korean Physical Therapy Science
• /
• v.16 no.4
• /
• pp.67-74
• /
• 2009

Background: This study had been carried out with 20 elderly subjects as its object for about one month from November 3, 2008 to December 14, 2008 in order to observe the effect of Underwater Treadmill on the elderly's walking and balance ability. Methods: Subjects were assigned either experimental group (n=10) or the control group (n=10), experimental group received Underwater Treadmill program (30 min per course, 3days a week for 6weeks). Subjects were assessed for muscle power (Nicolas Manual Muscle Test), balance (Functional Reach Test), gait ability (Time Up and Go, 10M walking test) before experiments and after experiments. Results: The results of this study were as follows; 1. After underwater treadmill exercise, the change of isometric contraction indicated a beneficial increase on lower extremity muscle power of experimental group and functional test of balance function; FRT, TUG indicated beneficial difference between groups. 2. beneficial difference between groups in walking speed of hourly index change of walking function. 3. between muscle power and balance, gait ability, we could find out there's high correlation ship between lower extremity muscle power increasing and balance and gait ability of the elderly. Conclusion: Aerobic exercise using underwater treadmill effects on muscle power strengthening of the elderly, and because of this, increase of lower extremity muscle power is very helpful not only to improvement of balance ability, but also to improvement of gait ability, so it will be used as a physical therapy program on clinic and used as an exercise program for protecting the elderly from falling down very well.

• Journal of Intelligence and Information Systems
• /
• v.26 no.4
• /
• pp.87-109
• /
• 2020

Currently, thanks to the major stride made in developing wired and wireless communication technology, a variety of IT services are available on land. This trend is leading to an increasing demand for IT services to vessels on the water as well. And it is expected that the request for various IT services such as two-way digital data transmission, Web, APP, etc. is on the rise to the extent that they are available on land. However, while a high-speed information communication network is easily accessible on land because it is based upon a fixed infrastructure like an AP and a base station, it is not the case on the water. As a result, a radio communication network-based voice communication service is usually used at sea. To solve this problem, an additional frequency for digital data exchange was allocated, and a ship ad-hoc network (SANET) was proposed that can be utilized by using this frequency. Instead of satellite communication that costs a lot in installation and usage, SANET was developed to provide various IT services to ships based on IP in the sea. Connectivity between land base stations and ships is important in the SANET. To have this connection, a ship must be a member of the network with its IP address assigned. This paper proposes a SANET-CC protocol that allows ships to be assigned their own IP address. SANET-CC propagates several non-overlapping IP addresses through the entire network from land base stations to ships in the form of the tree. Ships allocate their own IP addresses through the exchange of simple requests and response messages with land base stations or M-ships that can allocate IP addresses. Therefore, SANET-CC can eliminate the IP collision prevention (Duplicate Address Detection) process and the process of network separation or integration caused by the movement of the ship. Various simulations were performed to verify the applicability of this protocol to SANET. The outcome of such simulations shows us the following. First, using SANET-CC, about 91% of the ships in the network were able to receive IP addresses under any circumstances. It is 6% higher than the existing studies. And it suggests that if variables are adjusted to each port's environment, it may show further improved results. Second, this work shows us that it takes all vessels an average of 10 seconds to receive IP addresses regardless of conditions. It represents a 50% decrease in time compared to the average of 20 seconds in the previous study. Also Besides, taking it into account that when existing studies were on 50 to 200 vessels, this study on 100 to 400 vessels, the efficiency can be much higher. Third, existing studies have not been able to derive optimal values according to variables. This is because it does not have a consistent pattern depending on the variable. This means that optimal variables values cannot be set for each port under diverse environments. This paper, however, shows us that the result values from the variables exhibit a consistent pattern. This is significant in that it can be applied to each port by adjusting the variable values. It was also confirmed that regardless of the number of ships, the IP allocation ratio was the most efficient at about 96 percent if the waiting time after the IP request was 75ms, and that the tree structure could maintain a stable network configuration when the number of IPs was over 30000. Fourth, this study can be used to design a network for supporting intelligent maritime control systems and services offshore, instead of satellite communication. And if LTE-M is set up, it is possible to use it for various intelligent services.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.16 no.3
• /
• pp.295-300
• /
• 2010

The international convention on standards of training, certification and watch-keeping for seafarers, 1978(1978 STCW convention) has been established as a minimum standard and competence of seafarers, and contributed to reduce marine accidents caused by human errors. The convention has been partly amended several times according to environmental change of ship's operation and there were comprehensive revisions in so called 1995 amended STCW convention. In these years, ships are in tendency of increasing size and speed, and also adopted high technologies. These kinds of changes brought STW sub-committee up for discussions to modify the convention to cope with new environments from the year of 2006. As the result, major amendaments to STCW convention have been adopted at a diplomatic conference in Manila, Philippine in June 2010, thereby new global standards will be in force to train and certify seafarers to operate technologically advanced ships before long. This paper is to introduce major amendaments such as ship's security, ECDIS and leadership etc. in this Manila amendments and to clarify some articles to be adopted in programs for education and training of seafarers in Korea.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.5
• /
• pp.525-530
• /
• 2013

In this study, the generator engine of training ship M/S "HAE RIM" of Kunsan National University which is being operated for 20 years was used in the experiment. The experiment was carried out under the engine speed of 1200rpm, then the load was varied 30 kW intervals from 0 to 90 kW and the injection timing was varied $2^{\circ}$CA intervals from BTDC $19^{\circ}$ to $23^{\circ}$CA. In the case of advancing fuel injection timing from BTDC $21^{\circ}$CA to $23^{\circ}$CA, specific fuel consumption is decreased by 1.37%, NOx is increased by 11.59 %, soot is decreased by 23.5 % and $SO_2$ is decreased by 2.8 %. Accoring to the analysis of effects of fuel injection timing on combustion & exhaust emissions characteristics on an old marine diesel engine, it is proved that the optimum fuel injection timing is BTDC $23^{\circ}$ which is $2^{\circ}$ faster than that of original injection timing.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.6
• /
• pp.867-874
• /
• 2021

The IoT (Internet of Things) technology is rapidly becoming an important consideration in many engineering fields in the current 4th industrial era. In recent years, the concepts of digital shipbuilding and smart factories have been adopted as trends in shipyards. However, there is active interest in research on implementing autonomous driving in autonomous vehicles and airplanes, which is currently available in commercial form in a limited capacity. The present study is regarding the path-tracking performance of a boat to accomplish an autonomous driving mission using a flight controller (FC) and real-time kinematic (RTK) global positioning system (GPS) based on an open-source Ardupilot; an actual sea test is also performed using this system on a calm lake. The boat's mission is to evaluate the maneuverability of the self-driving process to a specific point and returning to the home position. For a given speed, the difference between the preset mission trajectory and actual operational trajectory was analyzed, and a series of studies were conducted on the applicability of the system to ships. In addition, the movements and maneuverability of the OmniX-type hull with four propellers were investigated, and the driving path-tracking performance was observed to increase by a maximum of 48%.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.30 no.2
• /
• pp.157-164
• /
• 2024

In 2020, 24,000 TEU ultra-large container ships began arriving at the Busan New Port. In this study, the wind pressure and hydraulic force acting on the hull were calculated to obtain the horsepower required for the tugboats for safe berthing and unberthing of a 24,000 TEU ultra-large container ship at the Busan New Port. When the wind speed is 10 m/s (20 kts), 13,000 TEU container ships meet the tug horsepower standard of the current Busan port tugboat operation rules, but 16,000 TEU and 24,000 TEU container ships do not satisfy the regulations. Therefore, it was proposed to raise the standards for tugboat use by dividing the size of ships of "G/T 150,000 tons or more," which is the largest vessel under the current tugboat use standards, into two stages. Because 140,000 tons requires 12,100 horsepower, 170,000 tons requires 14,500 horsepower, and 230,000 tons requires 18,000 horsepower, the study proposed 16,000 horsepower for 150,000 to less than 200,000 tons and 18,000 horsepower for 200,000 tons or more for the use of tugboats.