• JSTS:Journal of Semiconductor Technology and Science
• /
• 제12권3호
• /
• pp.320-330
• /
• 2012

In this paper, we investigate the power integrity of grid structures for power and ground distribution on printed circuit board (PCB). We propose the 2D transmission line method (TLM)-based model for efficient frequency-dependent impedance characterization and PCB-package-integrated circuit (IC) co-simulation. The model includes an equivalent circuit model of fringing capacitance and probing ports. The accuracy of the proposed grid model is verified with test structure measurements and 3D electromagnetic (EM) simulations. If the grid structures replace the plane structures in PCBs, they should provide effective shielding of the electromagnetic interference in mobile systems. An analytical model to predict the shielding effectiveness (SE) of the grid structures is proposed and verified with EM simulations.

• 한국군사과학기술학회지
• /
• 제22권2호
• /
• pp.151-161
• /
• 2019

In this study, to evaluate the High Altitude Electromagnetic Pulse(HEMP) protection performance of UHPC/CNT composites by the content of Carbon nanotubes(CNTs), Electromagnetic Shielding Effectiveness(SE) test was performed based on MIL-STD-188-125-1. And the results were verified by applying the Antenna theory. In the case of UHPC with a thickness of 200 mm mixed with 1 % CNT of cement weight, the SE was 28.98 dB at 10 kHz and 45.94 dB at 1 GHz. Then the Scabbing limit thickness for bullet proof was computed based on the result of compressive strength test which was 170 MPa, and it was examined whether it satisfied the HEMP protection criteria. As a result, the required HEMP shielding criteria were satisfied in all frequency ranges as well as the scabbing limit thickness was reduced by up to 43 % compared with that of ordinary concrete.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 추계학술발표대회 논문집
• /
• pp.33-36
• /
• 2003

AC and DC conductivity of the MWNT(Multi walled nanotubes)/polyurethane composites were investigated with respect to the various oxidative conditions, where these means acid concentration, treatment temperature, and treatment time. We suppose that the conditions of oxidation of the MWNTS have a certain influence on the degree of functionalization, damages, and dispersion of the MWNT themselves. Futhermore, the electrical properties of the resulting composites strongly depend on the oxidative conditions of MWNTS. The conductivity of the composites produced by using the optimal condition was measured as a function of frequency with volume content of MWNTS. These experimental results were analyzed using percolation theory Electromagnetic interference shielding effectiveness (SE) of the mixtures of polyurethane (PU), optimized MWNTs, and silver (Ag) is measured in the frequency range from 10 MHz to 6 ㎓ by using ASTM D4935-89. The measured SEs of the mixtures could be controlled from about 55 dB to 85 dB with the compositions of Ag/MWNT and compounding methods(C1, C2).

• 한국위성정보통신학회논문지
• /
• 제8권4호
• /
• pp.6-11
• /
• 2013

본 논문에서는 HEMP의 신호 특성을 설명하고 HEMP 방호시설에 영향을 미치는 요소들을 분석한다. 실제 시설 구축에 이용하기 위한 차폐룸의 규격을 정하기 위해 필요한 요소들을 찾는다. 수신 안테나의 거리와 주파수를 변화시켜 차폐 정도를 측정한다. 기준이 되는 미국 규격문서와 측정값을 비교하고 측정방법을 간소화해본다. 차폐룸 내부를 3가지 조건으로 만들어 변화에 따른 차폐 정도를 측정한다. 정방향 측정과 역방향 측정의 차이를 살펴보고 차폐룸 측정에 영향을 미치는 요소를 찾는다.

• 한국전자파학회논문지
• /
• 제25권11호
• /
• pp.1197-1200
• /
• 2014

HEMP 방호시설의 전자파 차폐 성능을 평가하는데 사용하고자 하는 두 시험 규격, IEEE Std. 299 및 MIL-STD-188-125-1은 동일한 방호시설임에도 불구하고, 각기 다른 시험 결과를 제공한다. 특히, 10 kHz~20 MHz 대역의 저주파 자기장 영역에서는 IEEE Std. 299 규격에 의한 시험 결과가 MIL-STD-188-125-1 규격에 비해 20~30 dB 정도 더 낮게 평가됨을 확인하였다. 이러한 결과는 두 규격에서 규정하고 있는 측정 조건이 상이함에 기인하며, 따라서 측정거리의 단축을 위해 IEEE Std. 299 규격을 적용할 경우에는 기존의 MIL-STD-188-125-1 규격에 근거하여 작성된 전자파 차폐 성능 요구는 재조정되어야 한다.

• 한국표면공학회지
• /
• 제51권5호
• /
• pp.263-270
• /
• 2018

Ag-coated Cu dendrites were prepared as a filler for an electromagnetic interference shielding application. Ag layers on the Cu dendrites was coated by two approaches. One is a direct autocatalytic plating with a reducing agent. The other approach was achieved by two-step plating, a galvanic displacement reaction to form Ag seed layers on Cu following by an autocatalytic plating with a reducing agent. The procedure-dependent average particle size and tap density of Ag-coated Cu dendrites were characterized. The electrical resistance and electromagnetic interference shielding effect (EMI SE) were analyzed with the Ag-coated Cu dendrites prepared in the two approaches. Additionally, the content of the Ag coated on Cu dendrites was controlled from 2% to 20%. The electrical resistance and EMI SE were critically determined by Ag contents coated on Cu.

• Carbon letters
• /
• 제24권
• /
• pp.41-46
• /
• 2017

The microstructure, flexural properties, electrical conductivity, thermal conductivity and electromagnetic interference (EMI) shielding effectiveness (SE) of epoxy composites filled with multi-walled carbon nanotubes (CNTs), exfoliated graphite nanoplatelets (xGnPs) and CNT-xGnP hybrid filler were investigated. The EMI SE of the CNT-xGnP hybrid composite was higher than 25 dB at 100 MHz while that of the xGnP based composite was almost zero. The flexural modulus of the CNT-xGnP based epoxy composite continuously increased to 3.32 GPa with combined filler content up to 10 wt% while that of the CNT based epoxy composites slightly decreased to 1.96 GPa at 4 wt% CNT, and dropped to 1.57 GPa at 5 wt% loading, which is lower than that of epoxy. The CNT and CNT-xGnP samples had the same EMI SE at the same surface resistivity, because samples with the same surface conductivity have the same amount of the charge carriers.

• Bulletin of the Korean Chemical Society
• /
• 제34권1호
• /
• pp.99-106
• /
• 2013

Polyaniline-yttrium trioxide (PAni-$Y_2O_3$) composites were synthesized by the in-situ polymerization of aniline in the presence of $Y_2O_3$ The composite formation and structural changes in these composites were investigated by X-ray diffraction (XRD), Fourier transform infra red spectroscopy (FTIR), scanning electron microscopy (SEM) and high resolution transmission electron microscopy (HRTEM). The direct current (DC) electrical conductivity of the order of $0.51{\times}10^{-2}\;S\;cm^{-1}-0.283\;S\;cm^{-1}$ in the temperature range 300 K-473 K indicates semiconducting behavior of the composites. Room temperature AC conductivity and dielectric response of the composites were studied in the frequency range of 10 Hz to 1 MHz. The variation of AC conductivity with frequency obeyed the power law, which decreased with increasing weight percentage (wt %) of $Y_2O_3$. Studies on dielectric properties shows the relaxation contribution coupled by electrode polarization effect. The dielectric constant and dielectric loss in these composites depend on the content of $Y_2O_3$ with a percolation threshold at 20 wt % of $Y_2O_3$ in PAni. Electromagnetic interference shielding effectiveness (EMI SE) of the composites in the frequency range 100 Hz to 2 GHz was in the practically useful range of -12.2 dB to -17.2 dB. The observed electrical and shielding properties were attributed to the interaction of $Y_2O_3$ particles with the PAni molecular chains.

• Composites Research
• /
• 제19권3호
• /
• pp.1-6
• /
• 2006

최근들어 고성능의 전자 장비들의 구조는 점점 복잡해지고, 이로 인해 발생되는 전자파 간섭(EMI) 및 적합성(EMC) 문제는 상업적으로나 군사적으로 매우 중요한 문제이다. 자동차, 비행기, 디스플레이 산업 등에서 민감한 전자 장비들과 밀집된 시스템들은 전자기파로부터 보호될 필요성이 있다. 다중벽 탄소나노튜브(MWNT)가 첨가된 유리직물 복합재료와 전도성이 우수한 탄소복합재료를 차폐 물질로 제작하고 전기적 특성을 측정하였다. 관심 주파수 영역은 $300MHz{\sim}1GHz$의 영역이다. 전도성 필러가 첨가된 유리직물 복합재료와 이것으로 이루어진 차폐 기구물의 차폐 특성은 3-D 전자기장 해석 툴을 사용하여 예측해 보았다. 탄소복합재료 기구물의 차폐 특성은 전자파 무반향실에서 측정되었다. 설계에 따라 -20 dB 이상의 전자파 차폐 효율을 보이는 기구물을 제작할 수 있음을 확인하였다.

• 에너지공학
• /
• 제25권1호
• /
• pp.86-91
• /
• 2016

본 논문에서는 건축 관련 기술자들이 쉽게 사용할 수 있는 도파관 배열의 길이를 계산하는 가이드라인을 제시하였으며, 대상은 원형, 사각형 및 육각형 도파관을 단위 유닛으로 하는 배열이다. 본 가이드라인은 원형 도파관의 지름, 사각형 도파관의 가장 긴 한 변의 길이 및 육각형 도파관의 장축의 길이를 기준으로 간단하게 각 도파관 배열의 길이를 결정할 수 있는 그래프와 Table을 제시하는 것을 목표로 하였다. 연구결과, 지름 및 가장 긴 한변의 길이, 장축의 길이를 30 mm로 기준으로 하면, 차폐성능이 80 dB의 효과를 목표로 하면 육각형 도파관 배열의 길이가 사각형 도파관보다 5 mm 정도 짧아지게 된다. 또한 100 dB 차폐 성능을 목표로 할 경우 30 mm정도 짧은 것으로 나타났다. 원형 도파관을 비교하면 80 dB와 100 dB 모두 육각형 형태의 도파관을 사용하는 것이 도파관 배열의 길이를 13 mm 정도 단축시킬 수 있다. 따라서 동일한 차폐성능을 가지는 경우 압력손실을 고려하면 육각형 도파관을 사용하는 것이 가장 효율적 일것으로 판단된다.