• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.548-549
• /
• 2014

Omni-directional shear-horizontal magnetostrictive patch transducers have a disadvantage that magnetic flux leakage into the plate when it is installed on a ferromagnetic plate. The leakage produces poor transduction efficiency and unwanted wave mode excitation which should be avoided in guided wave inspections of large plate-like structures. In order to resolve these problems, we newly developed a method to reduce the leakage into the plate. In the method, the patch and the magnet are vertically lifted off and their optimal positions are determined by numerical simulations. Also, the verification of the developed method is successfully verified by experiments.

• 한국정밀공학회지
• /
• 제26권6호
• /
• pp.90-96
• /
• 2009

Ultrasonic method using SH(shear horizontal) wave has been developed to determine the surface damage in fatigued material. Fatigue damages based on propagation energy were analyzed by multi-regression analysis in interrupted fatigue test specimen including CrMoV and 12Cr alloy steel. From the test results, as the fatigue damage increased the propagation time of the launched waves increased and amplitude of wavelet decreased. Also, analysis for the waveform modulation showed a reliable estimation, with confidence limit of 97% for 12Cr steel and 95% for CrMoV steel, respectively. Therefore, It is thought that SH ultrasonic wave technique can be applied to determine fatigue damage of in-service component nondestructively.

• 전기학회논문지
• /
• 제60권3호
• /
• pp.594-599
• /
• 2011

A SAW strain sensor based on Shear Horizontal wave with an 92 MHz central frequency was developed. It consists of SAW sensor, PCB substrate and bonding material (Loctite 401). External force applied to PCB substrate bonded to a piezoelectric substrate induces strain at the substrate surface, which causes changes in the elastic constant and density of the substrate and hence the propagation velocity of the SAW. The change in the velocity of the SAW result in a frequency shift of the sensor and by measuring a frequency shift, we can extract the strain induced by the external force. The $41^{\circ}$ YX $LiNbO_3$ was used because it has a Leaky shear horizontal(SH) wave propagation mode and a high electromechanical coupling coefficient ($K^2$=17.2%). And to compare with Rayleigh wave mode, $128^{\circ}$ YX $LiNbO_3$ was used. And to make a stable and low insert loss, Split IDT structure was used. The obtained sensitivity and linearity of the SAW strain sensor in the case of Split IDT were measured to be 17.2 kHz / % and 0.99, respectively.

• 비파괴검사학회지
• /
• 제36권2호
• /
• pp.149-154
• /
• 2016

The use of nonlinear ultrasonics wave has been accepted as a promising tool for monitoring material states related to microstructural changes, as it has improved sensitivity compared to conventional non-destructive testing approaches. In this paper, third harmonic generation of shear horizontal guided waves propagating in an isotropic plate is investigated using the perturbation method and modal analysis approach. An experimental procedure is proposed to detect the third harmonics of shear horizontal guided waves by electromagnetic transducers. The strongly nonlinear response of shear horizontal guided waves is measured. The accumulative growth of relative acoustic nonlinear response with an increase of propagation distance is detected in this investigation. The experimental results agree with the theoretical prediction, and thus providing another indication of the feasibility of using higher harmonic generation of electromagnetic shear horizontal guided waves for material characterization.

• 지구물리
• /
• 제8권2호
• /
• pp.67-74
• /
• 2005

SH파 굴절법 토모그래피와 표면파 분산자료 역산을 통하여 2차원 S파 속도단면을 각각 구하였고, 비교 목적으로 P파 속도단면도 함께 구하였다. P파와 표면파는 지표에 수직하게 타격하여 발생시켰으며, 100 Hz와 4.5 Hz 수직지오폰 24개로 각각 수신하였다. SH파는 50 kg 나무원목의 좌우를 타격하여 발생시켰고, 8 Hz 수평 지오폰으로 수신하였으며, 좌측타격에서 우측타격을 빼주어 SH파 신호를 강화하였다. 초동주시 토모그램과 표면파 분산곡선으로부터 역산과정을 거쳐서 구한 S파 속도단면을 비교한 결과, 두 단면의 전체적인 양상은 서로 비슷하지만, 표면파 역산으로 구한 S파 속도단면이 전반적으로 작은 값을 갖는 경향을 보인다. 잡음에 취약한 SH파는 P파 및 PS 변환파 도달 이후에 기록되어 초동선택이 어려운 문제가 있으며, 균질한 수평모델을 가정하는 표면파의 분산곡선 역산은 측방 변화가 심한 곳에서 지하구조를 정확히 밝히는데 한계가 있음을 보인다.

• Earthquakes and Structures
• /
• 제23권4호
• /
• pp.353-361
• /
• 2022

The dynamic behavior of a single pile was investigated by using analytical and numerical studies. The focus of this study was to develop the dynamic p-y curve of a pile for pseudo-static analysis considering the shear wave velocity of the soil by using three-dimensional numerical analyses. Numerical analyses were conducted for a single pile in dry sand under changing conditions such as the shear wave velocity of the soil and the acceleration amplitudes. The proposed dynamic p-y curve is a shape of hyperbolic function that was developed to take into account the influence of the shear wave velocity of soil. The applicability of pseudo-static analysis using the proposed dynamic p-y curve shows good agreement with the general trends observed by dynamic analysis. Therefore, the proposed dynamic p-y curve represents practical improvements for the seismic design of piles.

• 비파괴검사학회지
• /
• 제31권1호
• /
• pp.47-52
• /
• 2011

전자기 초음파 탐촉자(electromagnetic acoustic transducer; EMAT)는 접촉 매질 없이 초음파의 송 수신이 가능하며 자석과 코일의 형상과 배열을 조절하여 SH파나 Lamb파 같은 유도 초음파 모드를 용이하게 발생시킬 수 있다. 또한 이러한 유도 초음파는 박판에서 판 두께 전체를 장거리로 전파하며 두께에 따른 분산특성이 있이 배관 등의 구조물을 탐상하는데 효과적인 비파괴검사 기법으로 연구되고 있다. 본 연구에서는 수평횡파(shear horizontal wave; SH)의 전파 거동을 해석하고 EMAT을 이용하여 SH파를 발생하여 스틸 박판의 두께 감육을 평가하였다. 그 결과 SH파의 분산특성은 두께 감육량의 증가에 따라 군속도가 감소하는 것을 확인할 수 있었으며, 이러한 군속도 변화를 통해 두께 감육량을 정량적으로 평가하는 것이 가능함을 확인하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.338-345
• /
• 2005

Recently, surface-wave methods have been widely used for site investigation due to economic advantage and improved reliability. Specially, the Spectral-Analysis-of-Surface-Wave (SASW) method has been used to evaluate soil properties in geotechnical engineering. In determination of subgrade stiffness by SASW measurements, only the vertical Rayleigh waves have been used. This study proposed a framework to determine shear-wave velocity profiles by using vertical and horizontal Rayleigh waves and Love wave all together. In addition, the Common-Array-Profiling(CAP) SASW method was employed, which subgrade stiffness of profile the local material under two fixed receivers. The procedure proposed in this study was verified by comparing the shear-wave velocity profiles with the shear-wave velocity profiles of downhole testing at two geotechnical sites.

• 대한기계학회논문집A
• /
• 제36권12호
• /
• pp.1511-1519
• /
• 2012

배관설비는 용접이음으로 많은 부분이 구성되어 있으며, 이러한 배관 용접부의 건전성 평가를 위한 초음파 검사 시스템의 자동화 요구가 증대하고 있다. 전자기초음파탐촉자(Electromagnetic Acoustic Transducer; EMAT)는 비접촉 방식으로 초음파를 송 수신할 수 있고 다양한 초음파 모드의 발생이 가능하여 초음파 자동화 시스템 구축에 매우 유용하다. 본 연구에서는 수평횡파(Shear Horizontal wave; SH-wave) EMAT를 적용하여 배관의 용접부에 존재하는 결함의 검출을 수행하였다. 이때 수평횡파의 특정 모드($SH_0$)의 신호해석을 위해 웨이브렛 변환(Wavelet Transform)을 이용한 신호의 시간-주파수 분석을 수행 하였다. 웨이브렛 변환으로 해석된 SH0 모드 주파수의 반사 신호강도가 결함의 길이와 선형적 관계를 나타내어 효과적으로 용접부 결함 검출이 가능하였다.

• The Journal of the Acoustical Society of Korea
• /
• 제17권2E호
• /
• pp.47-52
• /
• 1998

An analysis of dynamic responses is carried out on monoclinic anisotropic system due to a buried harmonic line source. The load is in the form of a normal stress acting along an arbitrary axis on the plane of symmetry within the orthotropic materials: In case that the line load is acting along the symmetry axis normal to the plane of symmetry, plane wave equation is coupled with verital shear wave and longitudinal wave. However, if the line load is acting along an arbitrary axis normal to the plane of symmetry, plane wave equation is coupled with vertical shear wave, longitudinal wave and horizontal shear wave. We first considered the equation of motion in a reference coordinate system, where the line load is coincident with a symmetry axis of the orthotropic material. Then the equation of motion is transformed into one with respect to general coordinate system with azimuthal angle by using transformation tensor. Plane wave solutions of monoclinic systems are derived for infinite media. Finally complete solutions for the plane harmonic wave are obtained by calculating the inverse of the integral transforms, in which bulk wave poles are avoided by deforming the contour of the integration to the complex plane. Numerical results for examples of orthotropic material belonging to monoclinic symmetry are demonstrated.