• 한국재료학회지
• /
• 제7권2호
• /
• pp.145-151
• /
• 1997

AI-xSi/ySiC( x:6~18wt%, y: 3~9wt%, SiC 입자크기: $10~28{\mu}m$) 복합재료를 재용해한 후 항온 유지하고 응고 시킬때 SiC 입자가 몰드의 하부로 침강하는 현상을 계통적으로 조사하였다. AI-Si/SiC 복합재료 용탕을 항온으로 유지하면 입자가 없는 지역은 유지시간이 약 처음 30분 동안 빠르게 증가한다. SiC 입자가 크기가 클수록 SiC입자의 크기가 클수록 SiC입자의 침강속도가 빠르다. 또한 복합재료중 철가한 SiC 입자의 부피분율이 증가하면 입자의 침강속도는 감소한다.

• 대한토목학회논문집
• /
• 제4권4호
• /
• pp.13-23
• /
• 1984

본(本) 연구(硏究)의 목적(目的)은 조류(潮流)에 의한 부유사(浮遊砂)의 확산(擴散)현상에 대하여 2차원 비정상확산(非定常擴散)방정식을 유한차분법(有限差分法)을 이용하여 부유사의 농도분포(分布)를 계산할 수 있는 수치모형(數値模型)을 개발하는데 있다. 바닥으로부터 부상량(浮上量)의 계산은 개수로에서 얻어진 공식(公式) 이용하였으며, 확산계수는 Coleman의 경험공식(公式)을 사용하였다. 특히, 침강속도 감쇠효과와 연직유속이 고려되었다. 여러 가지 경우의 계산예(計算例) 통하여, 유속조차, 연직유속, 침강속도의 감쇠효과 같은 각(各) 변수(變數)들이 부유사의 농도분에 미치는 영향이 검토 되었다.

• 한국소음진동공학회논문집
• /
• 제21권9호
• /
• pp.858-867
• /
• 2011

As applying an active control technique to a pneumatic vibration isolation system, the settling time for the payload excitation could be remarkably reduced as well as the improvement of isolation performance for the ground vibration. Some previous researches were dealt with the settling time through the simulation or experiment but, the discussion on the simulation or experimental results including moving parts, such as a XY-stage, on the isolation table rarely exists. As considering the moving part, the dynamic model could be time varying system and in such a case the force imposed on pneumatic vibration isolation table could be described by inertial forces of moving parts according to Newton's 3rd law, the action and reaction law. In this paper, the simulation procedure of the 3-DOF active pneumatic vibration isolation system including moving parts by TDC(time delay control) technique is proposed and the effectiveness through simulation results are also shown.

• 한국융합학회논문지
• /
• 제8권8호
• /
• pp.115-125
• /
• 2017

본 연구는 마음 가다듬음과 살핌 명상을 경험한 간호대학생을 대상으로 질적연구방법을 융합하여 내용을 살펴보고 기술하는 것을 목적으로 한다. 자료는 간호대학생 10명으로부터 수집되었으며 내용분석방법으로 분석되었다. 분석결과 4개의 주제묶음이 확인되었다; '삶을 성찰하며 참회한 후 태도의 변화가 일어남', '정신이 건강해짐', '주체적 삶의 주인으로 변화하게 됨', '존재의 가치를 인식하고 자기가치를 실현하고자 함'. 본 연구에서는 마음 가다듬음과 살핌 명상이 간호대학생의 도덕성을 회복하도록 하는 중재프로그램으로 이용 가능함을 논의하였다. 추후 마음 가다듬음과 살핌 명상을 수정 보완하여 다양한 대상자에 대한 확대연구가 필요하다.

• 한국전자파학회논문지
• /
• 제25권12호
• /
• pp.1251-1257
• /
• 2014

본 논문에서는 6~13 GHz 주파수 범위에서 30 kHz 이하의 주파수 분해능과 500 ns 이하의 동조 속도를 갖는 광대역 고속 주파수 합성기 구조를 제안하였다. 광대역에서 빠른 동조 속도와 우수한 위상잡음 특성, 고해상도 주파수 특성을 얻기 위해 DDS(Direct Digital Synthesizer)와 아날로그 직접 주파수 합성기술을 적용하여 주파수 합성기의 출력을 합성하였다. 그리고 광대역 주파수 합성기의 위상잡음 특성을 중첩의 원리를 이용하여 예측하였고 측정 결과와 비교하였다. 제작된 주파수 합성기의 주파수 동조 속도는 500 ns 이하, 위상잡음은 최고 주파수에서 -106 dBc @ 10 kHz 이하, 주파수 정확도는 ${\pm}2kHz$ 이하로 측정 되었다.

• 한국생산제조학회지
• /
• 제25권1호
• /
• pp.75-82
• /
• 2016

In this study, a cross-damped low vibration controller was developed to reduce vibration in ultra-precision dual stage driven by master/slave principle. In master-slave structure, the master stage leads the driving motion and the slave stage follows it so as to maintain a constant gap between two stages. In this structure, a small perturbation of master stage makes big oscillations in slave servoing stage, so a low damped master stage composed of voice coil motor makes a long vibration in settling area after driving motion profile. In this research, an effective feedback damping algorithm for increase the damping characteristics of the dual stage was developed. The designed velocity damping algorithm improves the system stability and reduces the settling time of the whole system. Simulation and experimental results show that the developed algorithm reduces settling time and improves the regulating performance.

• 상하수도학회지
• /
• 제22권2호
• /
• pp.179-182
• /
• 2008

The KIDEA process, occurred in single reactor, is operated by three consequential steps, i.e., aerobic, settling, and discharge while introducing wastewater into the bottom of reactor continuously. It could accomplish biological oxidation (BOD), nitrification, denitrification (T-N), phosphate removal (T-P), and solid separation (SS) through the operational mode mentioned. Especially, this system has removed the T-P by wasting certain amount of sludge at the end of aeration phase during 5~10 minutes and not returned the activated sludge into the reactor, that is, no RAS (Return Activated Sludge). All running mode and instrumentation were controlled by the PLC equipment automatically. In this study, therefore, we have evaluated T-P removal efficiency and moisture content (MC) performance under the different excess sludge wasting mode. T-P track study and MC with TS concentration were analyzed during aerobic and settling phase. It has revealed that there was no significant difference of released T-P concentration between the first case which waste the sludge at the end of aerobic phase (0.2mg/L) and the second case which waste the sludge at 40 min of settling phase (0.25mg/L). Also, dewatering duration and MC have decreased 1.7% when TS concentration was increased from 0.31% to 0.5% during aerobic condition. Hence, it has concluded the system performance was less influenced by the operation time change of PLC program.

• 한국물환경학회지
• /
• 제21권1호
• /
• pp.40-45
• /
• 2005

Sedimentation is one of the most common and important units in conventional water treatment plant. Structure such as various baffle walls and inclined plate settler may be obstacles to the horizontal flow when it is poorly designed. Therefore, the effects of these structures on characteristics of hydraulic flow must be evaluated to improve the settling efficiency of the floc. The hydraulic characteristic of the two sedimentations at Y water treatment plant (YWTP), which have different deflector baffles inside the settling basin, were investigated by tracer (fluoride) test. The inclined plate settler installed inside settling basin caused an undesirable impact on horizontal flow and produced dead zone. Solid baffle wall under the plate settler could help to minimize the formation of density currents and flow short circuiting. NaF used as a tracer was recovered more than 90% at investigated all basins. Morill index ($t_{90}/t_{10}$), Modal index ($t_p/T-HRT$) and short-circuiting index ($[M-HRT-t_p]/M-HRT$) were determined from tracer test results performed at YWTP. Those indices ranged 2.95~3.02, 0.40~0.53 and 0.32~0.46, respectively.

• 대한전자공학회논문지SD
• /
• 제40권12호
• /
• pp.24-30
• /
• 2003

본 논문에서는 첨두 검출기의 구조를 개선함으로써 정착시간(settling time)을 더욱 단축시킬 수 있는 적응형 기준레벨자동 발생회로를 제안했다. 제안한 기준레벨 자동 발생회로에 대해 비슷한 정착시간을 설정하였을 때에 오차전압비율이 기존 구조에 비해 절반 이하로 줄일 수 있어 정착시간을 상당량 개선할 수 있음을 해석을 통해 밝혔다. 아울러 상용 파운드리(foundry)를 이용하여 1.25G EPON 시스템용 버스트 모드기준레벨 자동 발생회로를 설계한 결과 동적 영역(dynamic range)이 40㏈인 입력신호에 대해 6㎱ 라는 매우 짧은 시간 이내에 기준 레벨을 생성해 내는 결과를 얻을 수 있었다.

• 한국환경복원기술학회지
• /
• 제7권1호
• /
• pp.97-109
• /
• 2004

The disposal of stormwater is one of the major problems in urban water management. One method of reducing peak runoff rates and other detrimental impacts of stormwater is detention storage. Detention ponds as a water quality control alternatives have been investigated by a number of researchers. Recognizing multiple roles such as flood peak attenuation, pollution removal and aesthetic enhancement, the design and management of detentions ponds deserve more research. The purpose of this research is to establish design criteria wet detention ponds to improve water quality. Water quality in detention pond discharge might be improve with physical, chemical and biological alterations. Physical alteration was focused in this study. There are several methods for estimating the suspended solid control capability of wet detention ponds. Existing models of suspended solids removal are based on sedimentation and gravity settling theory. The pollutant trap efficiency of pond is a function of several interrelating factors. Detention time is the most important factor, because it determine gravity settling quantities of pollutants. Desirable modification of physical factors for improvement of water quality in wet detention ponds are volume ratio, area ratio, length to width ratio, depth, out let location, bottom soil type. In order to apply design procedure in actual site, Namak new town development area was selected.