• International Journal of Industrial Entomology and Biomaterials
• /
• v.47 no.1
• /
• pp.63-71
• /
• 2023

In this study, the structural characteristics of sericin recovered from wastewater released from the silk textile industry (Plant sericin) were comparatively analyzed with those of sericin extracted from a silkworm cocoon produced in a laboratory (Lab sericin). To prepare Plant sericin, ethanol was added to wastewater (i.e., a sericin aqueous solution) after the degumming process to remove nonprotein materials, affording a sericin precipitate. To prepare Lab sericin, nonprotein materials were removed from a silkworm cocoon and sericin was subsequently extracted from the cocoon. Lab sericin and Plant sericin exhibited similar solution viscosities, gel strengths, and crystallinity indices, indicative of the similar molecular weights (MWs) of the two sericin samples. In the case of sericin powder, Plant sericin was more crystalline than Lab sericin due to its treatment with ethanol. The findings of this study revealed that sericin recovered from industrial wastewater can be used equally as its MW is similar to that of sericin obtained through laboratory-scale extraction.

• Current Research on Agriculture and Life Sciences
• /
• v.20
• /
• pp.55-63
• /
• 2002

This experiment was to know properties of Sericin Jam that development, growth of silkgland, content of sericin and composition of amino acid in hemolymph. The characters of Sericin Jam can he seen form this experiment. Hatching ratio was 85% in Sericin Jam and 95% in Jam 120. Especially hatching period of Sericin Jam was longer than Jam 120 and also hatching of Sericin Jam was ununiform. The larval duration of Sericin Jam was 20 days and 23 hours, and Jaw 120 was 21 days and 22 hours. In Sericin Jam, middle silkgland contain a great p arts in silkgalod and posterior silkgand is short and no curves. The period of mounting to emergence was 12 days in Sericin Jam. The period of pupa was 7day. It is property of Sericin Jam that the period is short. Cocoon was very thin and light in Sericin Jam. Weight of cocoon shell of Sericin Jam is 2.7cg. The sericin protein quantity was 100% in cocoon shell of Sericin Jam, about 28% in cocoon shell of Jam 120, however the sericin ratio per Sericin Jam cocoon was 34.6% compare to cocoon shell of Jaw 120 in sericin protein quantity. The amino acids in hemolymph of Sericin Jaw was much hidtidine, lysine, glut amic acid. And the amount of almost amino acids were increased depends upon development at t he 5th instar.

• Current Research on Agriculture and Life Sciences
• /
• v.1
• /
• pp.55-65
• /
• 1983

The purpose of this study is to find out influences of several chemicals on the solubility of cocoon sericin in water, and there are several results of use to control the solubility of cocoon sericin in water. The results obtained are summarized as follows : The chemical which shows the strongest accelerating power of the solubility of cocoon sericin in water is Sodium Hydroxide (NaOH), the second is Potassium Hydroxide (KOH), the third is Sodium Silicate ($Na_2SiO_3$), and the weakest is Sodium Bicarbonate ($NaHCO_3$) in order among noticed silk-reeling accelerators. The chemical which shows the strongest inhibiting power of the solubility of cocoon sericin in water is Form Aldehyde (HCHO), the second is Ammonium Alum ($Al_2(SO_4)_2{\cdot}(NH_4)_2SO_4{\cdot}24H_2O$), the third is Acetic Acid ($CH_3COOH$), the weakest is Hydrochloric Acid(HCl) in order among noticed silk-reeling inhibitors. Particulary Hydrochloric Acid (HCl), which is expected to show strong inhibiting power of the solubility of cocoon sericin in water, shows accelerating power of the solubility of cocoon sericin at high temperature over 80 degrees of Celsius thermometer in water.

• Journal of Sericultural and Entomological Science
• /
• v.30 no.1
• /
• pp.33-39
• /
• 1988

In the case of white cocoon, the fluorescence colors are classified as a yellowish fluorescence cocoon(Y.F.C.) and a violet fluorescence cocoon(V.F.C.) by exposing to ultra-violet ray. Accordingly, experiments were carried out to investigate the difference of sericin behaviors between Y.F.C. and V.F.C. by measuring the sericin solubility, surface tension and viscosity of the sericin solution. Also, the reelability of two different type of cocoons was investigated in the silk reeling process. The results were summarized as follows; 1. The sericin solubility of Y.F.C. shell is higher than that of V.F.C. shell with the dissolution temperature and time. It is shown that the sericin solubility curves of Y.F.c. and V.F.C. are similar in shape, but the difference of sericin solubility between Y.F.C. and V.F.C. is more significant at higher bath temperature. 2. The initial sericin dissolution curves of Y.F.C. and V.F.C. cocoon shell can be divided by four parts within the range of dissolving time from 5 minutes to 60 minutes. The initial dissolution velocity of Y.F.C. shell is faster than that of V.F.C. but the velocity difference is negligible after 30 minutes of dissolving time. 3. The gelation of V.F.C. sericin solution is faster than that of Y.F.C. at early stage(in the range of 15 minutes to 60 minutes). 4. In the silk reeling process, the reelability of Y.F.C. is better than that of V.F.C. with about 11%. This is mainly due to the higher sericin solubility in Y.F.C. followed by the fast dissolution velocity.

• Journal of Sericultural and Entomological Science
• /
• v.15 no.1
• /
• pp.31-35
• /
• 1973

Strength, elongation and elasticity are essential properties with regard to the tensile properties of raw silk thread. The reasonable harmony of the above three physical characters appears to be the specific nature of the raw silk thread and the dynamical functions are determined by the cocoon filament forming the raw silk. From such viewpoint, the author has studied the tensile property of the thread when the cocoon filament is stretched and transformed. The results obtained are as follows: 1) The stretching strength of the inner layer filament is stronger than that of the outer and medium layer ones. 2) The stretching strength of the filaments is influenced by the moisture-heat denaturalization of cocoon layer sericin in the drying process. 3) The more transformed functions by the stretching become, the lower the elasticity index of the cocoon filament was shown. 4) When cocoon layer sericin is denatured by moisture and heat, elasticity index of the filament is decreased.

• Journal of Sericultural and Entomological Science
• /
• v.16 no.1
• /
• pp.21-48
• /
• 1974

The studies were carried out to disclose the physical and chemical properties of sericin fraction obtained from silk cocoon shells and its characteristics of swelling and solubility. The following results were obtained. 1. The physical and chemical properties of sericin fraction. 1) In contrast to the easy water soluble sericin, the hard soluble sericin contains fewer amino acids include of polar side radical while the hard soluble amino acid sach as alanine and leucine were detected. 2) The easy soluble amino acids were found mainly on the outer part of the fibroin, but the hard soluble amino acids were located in the near parts to the fibroin. 3) The swelling and solubility of the sericin could be hardly assayed by the analysis of the amino acid composition, and could be considered to tee closely related to the compound of the sericin crystal and secondary structure. 4) The X-ray patterns of the cocoon filament were ring shape, but they disappeared by the degumming treatment. 5) The sericin of tussah silkworm (A. pernyi), showed stronger circular patterns in the meridian than the regular silkworm (Bombyx mori). 6) There was no pattern difference between Fraction A and B. 7) X-ray diffraction patterns of the Sericin 1, ll and 111 were similar except interference of 8.85A (side chain spacing). 8) The amino acids above 150 in molecular weight such as Cys. Tyr. Phe. His. and Arg. were not found quantitatively by the 60 minutes-hydrolysis (6N-HCI). 9) The X-ray Pattern of 4.6A had a tendency to disappear with hot-water, ether, and alcohol treatment. 10) The partial hydrolysis of sericin showed a cirucular interference (2A) on the meridian. 11) The sericin pellet after hydrolysis was considered to be peptides composed with specific amino acids. 12) The decomposing temperature of Sericin 111 was higher than that of Sericin I and II. 13) Thermogram of the inner portioned sericin of the cocoon shell had double endothermic peaks at 165$^{\circ}C$, and 245$^{\circ}C$, and its decomposing temperature was higher than that of other portioned sericin. 14) The infrared spectroscopic properties among sericin I, II, III and sericin extracted from each layer portion of the cocoon shell were similar. II. The characteristics of seriein swelling and solubility related with silk processing. 1) Fifteen minutes was required to dehydrate the free moisture of cocoon shells with centrifugal force controlled at 13${\times}$10$^4$ dyne/g at 3,000 R.P.M. B) It took 30 minutes for the sericin to show positive reaction with the Folin-Ciocaltue reagent at room temperature. 3) The measurable wave length of the visible radiation was 500-750m${\mu}$, and the highest absorbance was observed at the wave length of 650m${\mu}$. 4) The colorimetric analysis should be conducted at 650mu for low concentration (10$\mu\textrm{g}$/$m\ell$), and at 500m${\mu}$ for the higher concentration to obtain an exact analysis. 5) The absorbing curves of sericin and egg albumin at different wave lengths were similar, but the absorbance of the former was slightly higher than that of the latter. 6) The quantity of the sericin measured by the colorimetric analysis, turned out to be less than by the Kjeldahl method. 7) Both temperature and duration in the cocoon cooking process has much effect on the swelling and solubility of the cocoon shells, but the temperature was more influential than the duration of the treatment. 8) The factorial relation between the temperature and the duration of treatment of the cocoon cooking to check for siricin swelling and solubility showed that the treatment duration should be gradually increased to reach optimum swelling and solubility of sericin with low temperature(70$^{\circ}C$) . High temperature, however, showed more sharp increase. 9) The more increased temperature in the drying of fresh cocoons, the less the sericin swelling and solubility were obtained. 10) In a specific cooking duration, the heavier the cocoon shell is, the less the swelling and solubility were obtained. 11) It was considered that there are differences in swelling or solubility between the filaments of each cocoon layer. 12) Sericin swelling or solubility in the cocoon filament was decreased by the wax extraction.. 13) The ionic surface active agent accelerated the swelling and solubility of the sericin at the range of pH 6-7. 14) In the same conditions as above, the cation agent was absorbed into the sericin. 15) In case of the increase of Ca ang Mg in the reeling water, its pH value drifted toward the acidity. 16) A buffering action was observed between the sericin and the water hardness constituents in the reeling water. 17) The effect of calcium on the swelling and solubility of the sericin was more moderate than that of magnecium. 18) The solute of the water hardness constituents increased the electric conductivity in the reeling water.

• Current Research on Agriculture and Life Sciences
• /
• v.3
• /
• pp.70-78
• /
• 1985

The purpose of this study was to find out effects of several chemicals treatment for cocoon sericin. and there was several results of use to control the solubility of cocoon sericin in water. The results obtained was summarized as follows ; The chemicals which showed the strongest accelerating power on the solubility of cocoon sericin in water was sodium peroxide ($Na_2O_2$), the second was sodium carbonate ($Na_2CO_3$), the third was sodium sulfite ($Na_2SO_3$), the weakest was ammonia water ($NH_4OH$) in order among noticed silk-reeling accelerators. The chemicals which showed the inhibiting power on the solubility of cocoon sericin in water was tannic acid ($C_{14}H_{10}O_9$), the second was stannic acid ($Sn(OH)_4$), the third was formic acid (HCOOH) and the weakest was methyl alcohol ($CH_3OH$) in order among noticed silk-reeling inhibitors. Particulary stannic acid and formic acid showed accelerating power on the solubility of cocoon sericin at high temperature over 100 degrees of celsius thermometer in water Methyl alcohol did not show the inhibiting power on the solubility of cocoon sericin in low concentration. (at 1,500-2,000 times)

• Journal of Sericultural and Entomological Science
• /
• v.31 no.2
• /
• pp.121-126
• /
• 1989

Two kinds of solution for the measurement of solubilities of Sericin are prepared as followings at temperature 90 deg. C. One has the total carbonate concentration as 0, 50, 100mg CO2/l prepared with non-carbonate distilled water, sodium hydrogen carbonate and 0.1N HCI and NaOH, the other has total hardness, that is, calcium hardness or magnesium hardness as 0, 20, 50, 100mg CaCO2/l respectively prepared with non-carbonate distilled water, calcium carbonate and magnesium oxide. Solubilities of Cocoon layer Sericin at above solution gives following results ; 1. pH shows little effect on the solubility of Sericin at the non-carbonate solution but at the carbonate solution pH shows a sensitive effect on the solubility of Sericin. These means that pH controls the concentration of H2CO3, HCO3-and CO32- which prevent and promote the solution of Sericin. 2. After the cocoon layer treatment at the solution, the initial pH of 4.0, 7.0, 9.0 of the solution changed to 6.0-6.5 at the lower total carbonate solution. However in the higher total carbonate solution pH did not changed very much. This may be explained by the buffer action of carbonate. 3. The effect of the hardness on the solubility of Sericin was not found in the non-carbonate solution with the standard hardness after treatment of cocoon layer.

• Journal of Sericultural and Entomological Science
• /
• v.15 no.2
• /
• pp.45-53
• /
• 1973

1. The sericin solubility increased rapidly as the increase of water M-alkalinity. 2. The acidity of the treated water was nutralized at the over 25ppm of M-alkalinity. 3. The more M-alkalinity of the sample water is, the more M-alkalinity was found after cocoon treat. 4. The total hardness of sample water seemed to be droped as M-alkalinity increased. 5. The sericin solubility also seemed to be droped as the increase of water acidity. 6. In case of treat finish with cocoon, the acidity and total hardness seemed to increase as the acidity of the water increased, but M-alkalinity was nutralized at 20~40 ppm of water acidity or the M-alkalinity could not be found in case over 40ppm of acidity. 7. In case increase of iron component with sample water, sericin solubility seemed to drop down, and mangan component showed the same nature but dull drop. 8. After cocoon was treated with water, acidity, M-alkalinity and total hardness were increased by the extraction from cocoon shell because of pH and treating temperature but not because of iron componnent. Mangan component, however, affected as to increase of acidity and total hardness but to decrease for M-alkalinity. 9. In case change of M-alkalinity and total hardness, sericin solubility has increased also. 10. In case constant pH and total hardness, the more M-alkalinity is, the more sericin solubility was found. 11. In case constant pH, total hardness, and M-alkalinity, the more acidity is, the less sericin solubility was found. 12. In case constant pH(6.8) and M-alkalinity, the more total hardness is, the less sericin solubility was found. 13. Though the combination of water, high solubility water, medium solubility water and low solubility water were prepared. The high solubility water desolved sericin 2.2% more than low solubility water. And the medium solubility water desolved sericin as much as 2.4~2.9%. 14. It was found that the most important factors for filature water are pH, M-alkalinity, acidity and total hardness which may need more words for optimum filature water development. 15. In case of repeat use of water, the buffer action of water has increased so that the sericin solubility to be decreased.

• Journal of the Korean Applied Science and Technology
• /
• v.40 no.1
• /
• pp.88-94
• /
• 2023

Sericin is a protein extracted from the cocoon and has many health benefits. This study was conducted to evaluate the anti-wrinkle and anti-inflammatory activity of sericin derived from cocoon as a cosmetic material. The antioxidant activity of sericin was measured by DPPH and ABTS assays. In addition, cell viability was confirmed in Raw 264.7 cells, which are macrophages, and the anti-inflammatory effect of sericin was investigated using the inflammatory response induced using lipopolysaccharide (LPS). It shows that sericin has antioxidant activity and can be an excellent material for anti-aging and anti-inflammatory cosmetics.