• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.17 no.4
• /
• pp.97-102
• /
• 2007

In this paper, a new architecture for fast-serial $GF(2^m)$ multiplier with low hardware complexity is proposed. The fast-serial multiplier operates standard basis of $GF(2^m)$ and is faster than bit serial ones but with lower area complexity than bit parallel ones. The most significant feature of the fast-serial architecture is that a trade-off between hardware complexity and delay time can be achieved. But The traditional fast-serial architecture needs extra (t-1)m registers for achieving the t times speed. In this paper a new fast-serial multiplier without increasing the number of registers is presented.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.522-525
• /
• 2006

Recently, mobile devices support multi-functions such as 3D game, wireless internet, moving pictures, DMB, GPS, and PMP. Bigger size of display device is indispensable to support these functions and higher speed of the interface is needed. However, conventional parallel interfaces between processor and display nodule are not competent enough for that high speed transfers. High-speed serial interface is beginning to appear as an alternative for parallel interface. The advantages of the serial interface are high bandwidth, small number of interconnections, low-power consumption, and good quality of electro-magnetic interference. In this paper, we implement serial interface and use it for a display module. LVDS is used for PHY layer and a defined packet is used for link layer. The feature of the implemented serial interface is the reduced number of interconnections with enough bandwidth.

• Journal of Korean Library and Information Science Society
• /
• v.22
• /
• pp.61-93
• /
• 1995

This paper discussed which of the three basic entries of serials that changed their titles-earliest, latest, or successive entry cataloging-is the most efficient, informative, and economical in a manual and an online environment. The results of the study are as follow: 1. Earliest entry cataloging or as an alternative, successive entry cataloging advocated by Cutter in 1976 was replaced in ALA Cataloging Rules by latest entry cataloging and with AACR1 and AACR2, latest entry cataloging was replaced by successive entry cataloging again. 2. Entry method of serial cataloging should be determined in consideration of goals of catalog, efficiency of catalog retrieval, theoretical and practical standpoint of entry methods, average cataloging time and cost, the state of adaption. 3. In a card catalog environment, if the numbering and class number of the serial that title proper changed into initials itself continue and the title history must not be too complicated, the serial is desirable to entry under the latest title. Except for above case, successive entry cataloging enables serials to be more quickly and economically made available to users than with either earliest or latest entry cataloging. 4. In an automated catalog environment, successive entry cataloging has more potential of satisfying and impairs the efficiency of both accessing and processing a library's serials collection. However, when initial cataloging by MARC format is done, careful screen design and complex programming will be needed. And subfield containing the local record number should be added to the programming means to link the various records together, i.e., 780 (preceding title) and 785 (succeeding title) fields for all related titles.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.712-716
• /
• 2008

In this paper, we introduce a way to generate and control the serial music using stochastical tools. A serialism, which is one of composition techniques in the 20th century modern music, is composed using uniformly distributed notes or durations. To conserve this property, we design the optimization process to generate the random numbers which can be used to compose the serial music. The optimization are designed using chi-square test and auto-correlation test. User can also apply the additional constraint to the objective function for controlling the serial music. Using the our method, we can compose and control the traditional serial music automatically.

• Journal of the Korean Society for information Management
• /
• v.23 no.2
• /
• pp.245-263
• /
• 2006

Since the beginning of discussions on serial collection management, as budgets have waxed and waned over the ensuing decades, a number of key variables affecting selection/deselection have emerged but without the framework of a coherent and accepted theoretical model. This study is an effort to identify variables which affect the serial collection decision with special attention to selection/deselection in the context of an academic health science library. Based on results from correlation analyses and logistic regression analyses, the serial collection decision can be explained and predicted using various combinations of a reduced set of objective variables. Applications of the results to libraries are discussed, and further research is proposed.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.6 no.3
• /
• pp.121-129
• /
• 2010

For the development of software industry, offers an expanded software authentication scheme caused by the unauthorized copying of software is to reduce the damage to software developers, retail sales and to promote the development of the software industry was studied. Serial Number of the current software registration is conducted in such a simple verification procedure if the Serial Number only illegal and can be installed on multiple computers, such as program code to allow third parties to enter the Serial Number, or the extract can be used without is a reality. The proposed extension to the software authentication system when you install the software, my phone authentication and MAC Address Authentication Service introduced to distinguish normal user, the user of the MAC Address of the server and software development company that was sent to the registered MAC Address of the computer to be run only by the use of genuine software and to make unauthorized copies of software generated by the software developer can reduce the damage of the proposed plan.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.324-326
• /
• 2011

As development of education contents has become more active, it is not much that way to preserve copyright of S/W consuming contents. So this paper studied way to preserve copyright of S/W from MAC address of ethernet and hard disk volume serial number. This study realizes the simple but powerful security algorithm to preserve copyright. So this tightens to preserve copyright of S/W of education contents and will contributes to decrease damages because of using illegal S/W.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.19 no.2
• /
• pp.93-99
• /
• 1999

SCAI(spent CANDU fuel bundle serial number identifier) was developed to read serial numbers of spent fuel bundles in the spent fuel storage. For the purpose of effectively identifying the serial number of fuel bundle. SCAI was composed of underwater camera & light part. guiding & supporting part and control & monitor part. So it is easy to assemble and disassemble, and operate. It was tested to read serial numbers of spent fuel bundles loaded in basket during the recent spent fuel transfer campaign at Wolsong Unit 1. And it was also applied to read serial numbers of spent fuel bundles discharging from the initial core at Wolsong Unit 3 by slight change of camera and light. Inspectors could easily operate SCAI after several practices in the storage pond, which was a user friendly. And SCAI provided clear and immediate picture for identification of serial numbers of spent fuel bundles. It was interally evaluated that SCAI greatly contributed to cut inspection efforts for national and international safeguards at Wolsong power plant.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.4 no.3
• /
• pp.197-203
• /
• 2009

Finite field arithmetic is very important in the area of cryptographic applications and coding theory, and it is efficient to use normal bases in hardware implementation. Using the fact that $GF(2^{mk})$ having a type-I optimal normal basis becomes the extension field of $GF(2^m)$, we, in this paper, propose a new serial multiplier which reduce the critical XOR path delay of the best known Reyhani-Masoleh and Hasan's serial multiplier by 25% and the number of XOR gates of Kwon et al.'s multiplier by 2 based on the Reyhani-Masoleh and Hasan's serial multiplier for type-I optimal normal basis.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1722-1723
• /
• 2007

This paper describes a simple method to reduce rotation angle error of mobile robot using omni-wheel[3](omni-bot). This method can be applied to not only omni-bot, but also other robot with a large number of servo motor. Robot using many servo motor as omni-bot is complicated for hardware and software, each servo motor has difficulty in synchronizing. Three servo motor, three omni-wheel and three serial servo motor controller is used, PC or Micro Processor interface with the serial servo controller through "SSC100" protocol. In order to check the improvement of the proposed serial servo synchronization compared to existing sequential communication method. comparing object is rotation angle error of omni-bot. The results of this make building of omni-bot system easy and decrease rotation angle error.