• 물과 미래
• /
• 제29권4호
• /
• pp.187-198
• /
• 1996

난류전단 흐름에서의 비정상 수평 선오염원의 확산에 관한 수치모형을 개발하였다. 계산기법으로는 비정상 이송확산 방정식을 종방향 이송 및 연직방향 확산으로 분리하고, 이들 방정식을 방시간 간격에 대하여 번갈아 계산하는 단계분리 유한차분기법을 사용하였다. 종방향 이송방정식에 대해서는 Holly-Preissmann 기법을, 연직방향 확산방정식에 대해서는 Crank-Nicholson 기법을 각각 적용하였다. 개발된 모형을 난류전단 흐름에서의 정상 수평 선오염원의 확산 문제에 적용하여 계산결과를 반해석해와 비교함으로써 모형을 검증하였다. 또한 난류전단 흐름내로 순간적으로 방류된 면오염원의 확산문제에 계산모형을 적용하였다. 마찰계수에 대한 민감도 분석 결과, 동일한 무차원 시각에서의 혼합 정도는 마찰계수에 관계없이 거의 일정한 것으로 나타났다. 또한 동일한 정도의 혼합상태에 도달하는 데 소요되는 유하거리는 마찰계수의 제곱근에 반비례함을 알 수 있었다.

• 대한기계학회논문집
• /
• 제14권3호
• /
• pp.624-635
• /
• 1990

본 연구에서는 마멸과정을 선형파괴역학적 관점에서 해석하여, 탄성체의 표면 에 산재되어 있는 표면균열의 전파거동을 마멸과정규명의 입장에서 살펴보고자 한다. 우선 마멸거동에 관한 파괴역학적 접근방식에 의한 마멸이론의 확립을 위해서, 표면균 열이 내부균열보다 그 전파 가능성이 높다고 한 Keer등의 주장에 착안하여 Hertz 접촉 압력하의 경사진 표면균열의 전파거동을 선형파괴역학적으로 해석하고자 한다. 이론 해석에 있어서는 표면균열을 인상전립의 연속분포로 치환하고, 전립밀도분포함수에 관 한 특이적분방정식을 유도해서 Erdogangupta의 방법을 이용하여 그 해를 구하였다.

• 한국수산과학회지
• /
• 제34권3호
• /
• pp.238-244
• /
• 2001

중층트롤 어구의 유체저항을 구하거나 전개판의 간격을 구하는 것은 어구설계나 어로작업에 유용하다. 본 논문에서는 끌줄에 관해 신장을 포함하여 간이해석적 (semi-analytic)으로 푼 3차원해석을 이용하여 중층트롤 어구의 끌줄에 적용시키고, 줄의 형상에 대해 기존의 직선이라는 가정은 실제로 이루는 곡선과는 차이가 있기에, 여기서는 줄의 형상을 곡선 형태로 도입하였는데, 날개그물 끝에서 후릿줄, 뜸$\cdot$발줄 및 (자루그물의) 힘줄에 미치는 세 힘의 합력을 역학적으로 고려하여 어구의 유체저항을 구한 방법을 나타낸 것으로서. 이때 전개판 (OB) 뒤쪽의 후릿줄 (hand rope), bridle 및 뜸 (발)줄의 형상을 곡선인 $y_{r}=Ax_{r}^{B}$의 형태 (B=2이면 포물선 (parabola)임)로 가정하였다. 기존의 중층트롤의 실험자료에서 끌줄의 길이가 100m인 경우에 예망속도의 변화에 따른 여러가지 측정값을 이용하여 트롤어구의 유체저항을 구하는 새로운 방법을 제시하였는데, 10매로 구성된 망지의 유체저항 ($R_{n}(kg)$)과 유속 (V)과의 관계는$1.34 범위에서 $R_{n}=1204.6\;V_{(m/s)}^{1.99}$ 관계가 있었다. 여기에서 제안한 방법을 이용하면 트롤어구의 그물만의 유체저항을 직접적으로 구할 수 있다.

• 대한기계학회논문집
• /
• 제15권1호
• /
• pp.323-327
• /
• 1991

본 연구에서는 로켓노즐로 부터 분출되는 고온의 초음속제트가 45˚로 경사진 평판으로 분사되는 경우의 열전달을 측정하였다.고온의 제트가 충돌하는 평판표면 의 고온과 열유속을 측정하는 것이 거의 불가능하므로, 국소적열전달은 국소적 준 1차 원 열전도모형을 평판표면 아래에서 측정한 온도자료에 적용하여 구하였다.

• 한국소음진동공학회논문집
• /
• 제14권4호
• /
• pp.310-318
• /
• 2004

For many industrial problems originating from aerodynamic noise, noise prediction techniques, reliable and easy to apply, would be of great value to engineers and manufacturers. General algorithm is presented for the prediction of internal flow-induced noise from quick opening throttle valve in an automotive engine. This algorithm is based on the integral formula derived by using the General Green Function, Lighthill's acoustic analogy and Curle's extension of Lighthill's. Novel approach of this algorithm is that the integral formula is so arranged as to predict frequency-domain acoustic signal at any location in a duct by using unsteady flow data in space and time, which can be provided by the Computational Fluid Dynamics Techniques. This semi-analytic model is applied to the prediction of internal aerodynamic noise from a throttle valve in an automotive engine. The predicted noise levels from the throttle valve show good agreement with actual measurements. The results show that the dipole noise is dominant in this phenomena and the origin of noise sources is attributed to the anti-vortex lines formed in the down-stream from a throttle valve. This illustrative computation shows that the current method permits generalized predictions of flow noise generated by bluff bodies and turbulence in flow ducts.

• 천문학회지
• /
• 제40권4호
• /
• pp.179-182
• /
• 2007

Dynamical friction plays an important role in reducing angular momenta of objects in orbital motions. While astronomical objects usually follow curvilinear orbits, most previous studies focused on the linear-trajectory cases. Here, we present the gravitational wake due to, and dynamical friction on, a perturber moving on a circular orbit in a uniform gaseous medium using a semi-analytic method. The circular orbit causes the density wakes to bend along the orbit into asymmetric configurations, resulting in the drag forces in both opposite (azimuthal) and lateral (radial) directions to the perturber motion, although the latter does not contribute to the orbital decay much. For a subsonic perturber, the bending of a wake is only modest and the resulting drag force in the opposite direction is remarkably similar to the linear-trajectory counterpart. On the other hand, a supersonic perturber is able to overtake its own wake, possibly multiple times, creating a high-density trailing tail. Despite the dramatic changes in the wake morphologies, the azimuthal drag force is in surprisingly good agreement with the formulae of Ostriker for the linear-trajectory cases, provided $V_pt=2R_p,\;where\;V_p\;and\;R_p$ are the velocity and orbital radius of the perturber, respectively.

• 전자공학회논문지A
• /
• 제32A권12호
• /
• pp.184-197
• /
• 1995

In this paper, high speed IC package-to-package interconnections are modeled as lossless multiconductor transmission lines operating in the TEM mode. And, three mathematical algorithms for computing electrical parameters of the lossless multiconductor transmission lines are described. A semi-analytic Green's function method is used in computing per unit length capacitance and inductance matrices, a matrix square root algorithm based on the QR algorithm is used in computing a characteristic impedance matrix, and a matrix algorithm based on the theory of M-matrix is used in computing a diagonally matched load impedance matrix. These algorithms are implemented in a computer program DIME (DIagonally Matched Load Impedance Extractor) which computes electrical parameters of the lossless multiconductor transmission lines. Also, to illustrate the concept of design database for high speed IC package-to-package interconnection, a database for the multi conductor strip transmission lines system is constructed. This database is constructed with a sufficiently small number of nodes using the multi-dimensional cubic spline interpolation algorithm. The maximum interpolation error for diagonally matched load impedance matrix extraction from the database is 1.3 %.

• Journal of Mechanical Science and Technology
• /
• 제19권12호
• /
• pp.2197-2204
• /
• 2005

The combination of Gas chromatography (GC) for separation and Flame Ionization Detection (FID) for detection and identification of the components of a mixture of compounds is a fast and strongly proved method of analytic chemistry. The objective of this research was to design a combined High-speed miniature screening Gas chromatograph along with a Flame Ionization Detector for quick, quantitative and qualitative analysis of gas components. This combined GC-FID system is suitable to detect the volatile and semi-volatile hydrocarbons present in a gas mixture. The construction made it less expensive, easy to use and movable. The complete gas path was developed. On/off valves, temperature and flow sensors and their interface electronics were used for controlling purpose. A Microcontroller was programmed to measure the temperature and gas flow using the sensors and to control and regulate them using the electronics and valves. A pocket PC with its touch screen served as a user interface for the system. Software was developed for the pocket PC, which makes the communication possible with the Microcontroller. The system parameters can be indicated in the Pocket PC as simple text and also the analysis result can be displayed.

• Current Optics and Photonics
• /
• 제4권4호
• /
• pp.368-372
• /
• 2020

We report the terahertz time-domain spectroscopy (THz-TDS) of transdermal drug delivery in human skin. The time evolution of transdermal nicotine delivery in nicotine patches was assessed by detecting the transmission coefficient of sub-picosecond THz pulses and using a semi-analytic model based on the single-layer effective medium approximation. Using commercial nicotine patches (Nicoderm CQ^®, 7 mg/24 h), THz transmission coefficients were measured to quantitatively analyze the cumulative amounts of nicotine released from the patches in the absence of their detailed specifications, including multilayer structures and optical properties at THz frequencies. The results agreed well with measurements by conventional in vitro and in vivo methods, using a diffusion cell with high-performance liquid chromatography and blood sampling respectively. Our study revealed the ability of the THz-TDS method to be an effective alternative to existing methods for noninvasive and label-free assessments of transdermal drug delivery, showing its high promise for biomedical, pharmaceutical, and cosmetic applications.

• Steel and Composite Structures
• /
• 제34권2호
• /
• pp.215-226
• /
• 2020

The aim of this study is to investigate free vibration of functionally graded porous nanocomposite rectangular plates where the internal pores and graphene platelets (GPLs) are distributed in the matrix either uniformly or non-uniformly according to three different patterns. The elastic properties of the nanocomposite are obtained by employing Halpin-Tsai micromechanics model. The GPL-reinforced plate is modeled using a semi-analytic approach composed of generalized differential quadrature method (GDQM) and series solution adopted to solve the equations of motion. The proposed rectangular plates have two opposite edges simply supported, while all possible combinations of free, simply supported and clamped boundary conditions are applied to the other two edges. The 2-D differential quadrature method as an efficient and accurate numerical tool is used to discretize the governing equations and to implement the boundary conditions. The convergence of the method is demonstrated and to validate the results, comparisons are made between the present results and those reported by well-known references for special cases treated before, have confirmed accuracy and efficiency of the present approach. New results reveal the importance of porosity coefficient, porosity distribution, graphene platelets (GPLs) distribution, geometrical and boundary conditions on vibration behavior of porous nanocomposite plates. It is observed that the maximum vibration frequency obtained in the case of symmetric porosity and GPL distribution, while the minimum vibration frequency is obtained using uniform porosity distribution.