• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.54 no.4
• /
• pp.228-234
• /
• 2005

In this paper, we proposed a self tuning adaptive fuzzy sliding control algorithms using gadient descent method to reduce chattering phenomenon which is viewed in variable control system. In design of FLC, fuzzy control rules are obtained from expert's experience and intuition and it is very difficult to obtain them. We proposed an adaptive algorithm which is automatically updated by consequence part parameter of control rules in order to reduce chattering phenomenon and simultaneously to satisfy the sliding mode condition. The proposed algorithm has the characteristics which are viewed in conventional VSC, e.g. insensitivity to a class of disturbance, parameter variations and uncertainties in the sliding mode. To demonstrate its performance, the proposed control algorithm is applied to an inverted pendulum system. The results show that both alleviation of chattering and performance are achieved.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2079-2081
• /
• 2002

R/C helicopter has been used to several fields of military affairs, investigation searching and toys because it has small size hovering and vortical take-off characteristics etc. Therefore it needs more realizable control method. The paper introduces simulation and experimental results for control of a helicopter training simulator by self tuning control method. To realize the disturbance rejection and the given reference tracking, a least common multiple polynomial between the reference and disturbance model polynomials is operated to the plant model. The effectiveness of the method is shown by simulation and experimental results for a helicopter training simulator with two degree of freedom.

• Proceedings of the KIEE Conference
• /
• 1997.07b
• /
• pp.660-662
• /
• 1997

A new improved excitation control system for power plant synchronous generators has been developed by KEPRI (Korea Electric Power Research Institute). The reliability of the excitation system is increased by designing a dual channel automatic voltage regulator(AVR). Also the performance of the excitation system is improved by Self-Tuning adaptive Controller. A software package is developed for the excitation control system, and a field test is conducted to verify the system performance.

• Proceedings of the KIEE Conference
• /
• 1997.07b
• /
• pp.609-611
• /
• 1997

In this paper, we propose the self-tuning of PID controller using diagonal recurrent neural networks. The characteristic of the proposed structure is on-line adaptive learning scheme in spite of variations of feedback, signals. Control performance is compared with that of neural network based PID controller which was proposed by Iwasa. Computer simulation results show that the proposed controller is effective in controlling of unknown nonlinear plants.

• Proceedings of the KIEE Conference
• /
• 1997.07b
• /
• pp.702-704
• /
• 1997

In this paper, we applied self-tuning controller with I-PD type to process with time delay's. Process parameters are estimated by the recursive least squares algorithm, and optimal gains are obtained. This paper shows self-tuning controller with I-PD type performs better than that of general PID type for the nonlinear system with sudden change of set-points.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.5
• /
• pp.17-23
• /
• 1985

This paper describes a method for the design of a self-tuning controller of single-input/single-output systems with system noises and obsrrvation noises. The method uses state-space techniques to assign the closed-loop system poles to desired locations, but the control law is made up of process input and output measurement values, so that state estimation is unnecessary. Also the difficulties of tracking of reference inputs in state.space pole-placing control are tackled by including the reference input in the cost function proposed by Beger.

• ETRI Journal
• /
• v.31 no.6
• /
• pp.755-764
• /
• 2009

This paper presents a switched self-biasing and a tail current-shaping technique to suppress the 1/f noise from a tail current source in differential cross-coupled inductance-capacitance (LC) voltage-controlled oscillators (VCOs). The proposed LC VCO has an amplitude control characteristic due to the creation of negative feedback for the oscillation waveform amplitude. It is fabricated using a 0.13 ${\mu}m$ CMOS process. The measured phase noise is -117 dBc/Hz at a 1 MHz offset from a 4.85 GHz carrier frequency, while it draws 6.5 mA from a 0.6 V supply voltage. For frequency tuning, process variation, and temperature change, the amplitude change rate of the oscillation waveform in the proposed VCO is 2.1 to 3.2 times smaller than that of an existing VCO with a fixed bias. The measured amplitude change rate of the oscillation waveform for frequency tuning from 4.55 GHz to 5.04 GHz is 131 pV/Hz.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.49 no.5
• /
• pp.225-234
• /
• 2000

In this paper, we present an nonlinear PID controller with network based compensator which consists of a conventional PID controller that controls the linear components and neuro-compensator that controls the output errors and nonlinear components. This controller is based on the Harris's concept where he explained that the adaptive controller consists of the PID control term and the disturbance compensating term. The resulting controller's architecture is also found to be very similar to that of Wang's controller. This controller adds a self-tuning ability to the existing PID controller without replacing it by compensating the output errors through the neuro-compensator. Various simulations and comparative studies have proven that the proposed nonlinear PID controller produces superior results to other existing PID controllers. When applied to an actual magnetic levitation system which is known to be very nonlinear, it has also produced an excellent results.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.29B no.3
• /
• pp.25-34
• /
• 1992

This paper proposes a Self-Tuning control algorithm for tracking the reference trajectory by measuring the end-point of robot manipulator whose links are light and flexible, and the performance of it is tested through the computer simulation. As an object of system, a flexible robot manipulator with two-links is considered and an assumed mode shape method including gravity force is adopted to analyze the vibration modes for each links and dynamics equation is derived. The controller is designed as a combined form which consists of dynamic feedforward compensator and self-tuning feedback controller. The one supplies nominal torque and the other supplies variational torque to manipulator. Apart from the, K-incremental predictor is also proposed in order to eliminate the offset error. and it shows that the result of simulation adapted well to load change and rapid velocity.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.34 no.7
• /
• pp.257-266
• /
• 1985

A new method for the artificial beta cell which can be used to control the hyperglycemia in diabetic patients was represented. The relationship between the insulin infusion rate and the blood glucose concentration was described by the second order ARMA model, and the time varying parameters were identified by exponentially weighted least squares estimator. The design of controller was based on the pole assignment self tuning altorithm with discrete blood sampling and the constraints of input and output responsse rate were considered. The results of animal experiments show that this method may be a fruitful approach for regulating the blood glucose level. We expect that this device can be used as both therapeutic and research tools providing that its stability and reliability are improved a little more.