• Convergence Security Journal
• /
• v.19 no.3
• /
• pp.13-19
• /
• 2019

MANET has many security vulnerabilities because it consists of only mobile nodes using wireless. In particular, it is a very important factor determining network performance that excludes the participation of malicious nodes through accurate reliability measurements and authentication of nodes participating in the network. In this paper, we proposed a technique applied with blockchain technology in order to prevent forgery of authentication information for nodes participating in the network. And, an area-based hierarchical structure was applied to increase the efficiency of authentication for nodes and apply the optimal technique of block generation and exchange protocol. In addition, four data payloads were added to the block header in order to add authentication information for nodes in block. To improve the reliability by applying the blockchain technique to the hop-by-hop data transfer method between mobile nodes, blockchain exchange protocol through transaction creation, block packaging and verification processes were implemented. We performed the comparative experiment with the existing methods to evaluate the performance of the proposed method and confirmed the excellent performance by the experiment results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.6A
• /
• pp.632-641
• /
• 2007

Since the mobile node acts as the router, the Mobile Ad Hoc network requires the security methods that are different from that of network of the wire environment. Also, since the total network can't be included in the transmission area of the mobile node, when one node sends the message to the other node, we need the middle node. But if the middle node is the unreliable malicious node, we can't guarantee the secure message transmission. Also, because all nodes configuring the network are the mobile nodes, they use the restricted battery capacity and the restricted resources. Therefore, because we have trouble performing the encryption that many resources are required when we sending the message, it is vulnerable to the security than the network of the wire environment. Last, because the network topology continues to change by the mobility of nodes configuring the network, we need the security measure that matches the network characteristics. We suggest the routing attack detection for performance enhancement of AODV protocol in Mobile Ad Hoc networks.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.5
• /
• pp.1704-1711
• /
• 2014

Sandy and dusty weather condition often occurs in the high altitude areas of China, which may greatly influence the corona generated radio interference (RI) characteristics of the bundle conductors of 750 kV AC power transmission lines. Corona generated RI of the conductors of the 750 kV AC power transmission lines used in practice is measured by EMI receiver with a coupling circuit and a coupling capacitor connected between the high voltage side and the earth side in fine and sandy and dusty condition. The measuring frequency is 0.5 MHz, and the quasi-peak detection is used. RI excitation function is calculated based on the corona RI current measured by the EMI receiver. Corona generated RI characteristics were analyzed from sand concentration and sand particle size. The test result shows that the corona generated RI excitation function is influenced by the sandy and dusty condition. Corona discharge of the conductors is more serious in sandy and dusty condition with an ultraviolet (UV) detector. Corona generated RI excitation function increases with the increase of sand concentration and also increases with the increase of particle size.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.28 no.1
• /
• pp.61-71
• /
• 2018

In the Internet of Things, in which plenty of devices have connection to each other, cryptographically secure Random Number Generators (RNGs) are essential. Particularly, entropy source, which is the only one non-deterministic part in generating random numbers, has to equip with an unpredictable noise source(or more) for the required security strength. This might cause an requirement of additional hardware extracting noise source. Although additional hardware resources has better performance, it is needed to make the best use of existing resources in order to avoid extra costs, such as area, power consumption. In this paper, we suggest an entropy source which uses a multi-threaded program without any additional hardware. As a result, it reduces the difficulty when implementing on lightweight, low-power devices. Additionally, according to NIST's entropy estimation test suite, the suggested entropy source is tested to be secure enough for source of entropy input.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.7
• /
• pp.1608-1616
• /
• 2015

This paper describes an efficient hardware implementation of lightweight encryption algorithm LEA-128/192/256 which supports for three master key lengths of 128/192/256-bit. To achieve area-efficient and low-power implementation of LEA crypto- processor, the key scheduler block is optimized to share hardware resources for encryption/decryption key scheduling of three master key lengths. In addition, a parallel register structure and novel operating scheme for key scheduler is devised to reduce clock cycles required for key scheduling, which results in an increase of encryption/decryption speed by 20~30%. The designed LEA crypto-processor has been verified by FPGA implementation. The estimated performances according to master key lengths of 128/192/256-bit are 181/162/109 Mbps, respectively, at 113 MHz clock frequency.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.10
• /
• pp.2121-2128
• /
• 2009

The application range of IEEE 802.11 wireless LAN has rapidly expanding from campus, enterprise to the public network of Hot Spot area due to the advantages of easiness of construction, mobility of wireless client station, convenience of usage and so on. However the security of WLAN(Wireless LAN) is vulnerable inherently because of using RF as a medium, and so the dangers of infringement of personal information and inside data of enterprises have increased and wardriving attack searching for security vulnerability in wireless LAN has become more serious especially. In this paper, we find out the overview of various procedures and preparatory stages for wardriving attack against wireless LAN, and propose complementary methods to prevent information infringement accidents from wardriving attack in wireless LAN. For this purpose, we make an equipment which is suitable for wardriving in wireless LAN and show security vulnerability of AP(Access Point) operation in WLAN around Yangjae-Dong in Seoul as a result of using the equipment.

• The KIPS Transactions:PartC
• /
• v.15C no.1
• /
• pp.1-8
• /
• 2008

The security of wireless sensor networks is a challenging research area where the resources constraints are a bottleneck for any successful security design. Due to their computational feasibility, symmetric key algorithms that require key pre-distribution are more desirable for use in these networks. In the pre-distribution scheme, keys or keying materials are assigned to each node prior deployment to guarantee a secure communication within the entire network. Though several works are introduced on this issue, yet the connectivity and resiliency are imperfectly handled. In this paper, we revisit the grid based key pre-distribution scheme aiming to improve the connectivity, introduce a higher resiliency level, simplify the logic of key establishment and maintain same level of used of resources usage. The core of our modification relies on introducing the novel plat-based polynomial assignment and key establishment mechanism. To demonstrate the advantageous properties of our scheme over the revisited one, details of consumed resources, resulting connectivity, security and comparisons with relevant works are introduced.

• Journal of Korea Society of Industrial Information Systems
• /
• v.13 no.2
• /
• pp.80-87
• /
• 2008

RFID systems are being studied and developed in the area of the industry and marketplace. Recently RFID systems are core element of the ubiquitous technologies in individual life and industry. However, RFID systems often cause some serious problems such as violation of privacy and information security because their contactless devices communicate each other by radio frequency In this paper, we propose multiple objects RFID tag scheme including tag structure and authentication protocol. The proposed RFID tag structure maintains several object IDs of different applications in a tag memory. The tag structure allows those applications to access object IDs simultaneously. The authentication protocol for multiple objects tag is designed ta overcome the problems of security and privacy. The protocol has robustness against various attacks in low cost RFID systems. We evaluate the efficiency of proposed scheme and compare security of our scheme with several traditional schemes.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.11
• /
• pp.2031-2038
• /
• 2008

A small-area and high-speed authentication/security processor (WUSB_Sec) IP is designed, which performs the 4-way handshake protocol for authentication between host and device, and data encryption/decryption of wireless USB system. The PRF-256 and PRF-64 are implemented by CCM (Counter mode with CBC-MAC) operation, and the CCM is designed with two AES (Advanced Encryption Standard) encryption coles working concurrently for parallel processing of CBC mode and CTR mode operations. The AES core that is an essential block of the WUSB_Sec processor is designed by applying composite field arithmetic on AF$(((2^2)^2)^2)$. Also, S-Box sharing between SubByte block and key scheduler block reduces the gate count by 10%. The designed WUSB_Sec processor has 25,000 gates and the estimated throughput rate is about 480Mbps at 120MHz clock frequency.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.1
• /
• pp.206-215
• /
• 2007

Ad-Hoc network technology is a mobile internet technology of the future that will be used widely not only in Mobile Network but also in Wireless Personal Area Network (WPAN) and Ubiquitous Network For this to occur, distributed routing protocol design, loop prevention for link information reduction in overhead for control messages and route restoration algorithm must be improved or complemented. Security techniques that can guarantee safe com-munication between Ad-Hot nodes net also be provided. This study proposes and evaluates a new authentication mechanism for MANET. The mechanism segregates the roles of certification authority to keep with the dynamic mobility of nodes and handle rapid and random topological changes with minimal over-head. That is, this model is characterized by its high expandability that allows the network to perform authentication service without the influence of joining and leaving nodes. The efficiency and security of this concept was evaluated through simulation.