• 품질경영학회지
• /
• 제25권4호
• /
• pp.57-70
• /
• 1997

Consider a production system where all manufactured products are screened through automatic inspection equipment. The products for which the measured value of quality characteristic is larger than the lower screening specification limit (SL) and smaller than the u, pp.r screeing specification limit(SU) are accepted. Those smaller than SL are reworked and those larger than SU are excluded from the process. Assuming that the quality characteristic is normally distributed with known variance, this paper suggests cost models which involve inspection cost, production cost, rework cost, exclusion cost and quality cost, and presents the methods of finding the optimal values of the screening specification limits and the process target. Numerical example is given to demonstrate the a, pp.icability of the cost models suggested in this paper.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권9호
• /
• pp.3458-3481
• /
• 2021

Existing methods for blind identification of linear block codes without a candidate set are mainly built on the Gauss elimination process. However, the fault tolerance will fall short when the intercepted bit error rate (BER) is too high. To address this issue, we apply the reverse algebra approach and propose a novel "two-step-screening" algorithm by solving the linear error equations on the binary Galois field, or GF(2). In the first step, a recursive matrix partition is implemented to solve the system linear error equations where the coefficient matrix is constructed by the full codewords which come from the intercepted noisy bitstream. This process is repeated to derive all those possible parity-checks. In the second step, a check matrix constructed by the intercepted codewords is applied to find the correct parity-checks out of all possible parity-checks solutions. This novel "two-step-screening" algorithm can be used in different codes like Hamming codes, BCH codes, LDPC codes, and quasi-cyclic LDPC codes. The simulation results have shown that it can highly improve the fault tolerance ability compared to the existing Gauss elimination process-based algorithms.

• 품질경영학회지
• /
• 제33권4호
• /
• pp.88-95
• /
• 2005

Multistage screening is a common practice when a component has a critical effect on the function of the assembly. A defect in a component might incur malfunction of an electronic device, resulting in a great amount of loss. Multistage screening, including duplicated screening inspections, may provide a good solution for this problem when inspection errors are present. In the company studied here, the manufacturing process of the multiple layer chip capacitor includes two-stage screening. In the first stage, screening inspection is performed repeatedly until no defects are found in the lot. In the second stage, sampling inspection is performed by a group of experts prior to shipment. In this article, we review the procedure used in the field and suggest a revised model of the multiple screening procedure and solution method for this situation. The usefulness of the proposed model is discussed through a practical example.

• 한국재난정보학회 논문집
• /
• 제18권2호
• /
• pp.252-260
• /
• 2022

연구목적: 기후변화 등으로 인해 자연재해의 빈도 및 강도가 증가하고 있어, 원자력발전소에 영향을 주는 외부사건이 발생할 수 있다. 원자력발전소는 자연재해, 인공재해 등 외부사건으로부터 안전해야 한다. 따라서 원자력발전소에 발생할 수 있는 외부사건을 식별하여야 하며, 원자력발전소에 큰 영향을 줄 수 있는 외부사건을 선별하여야 한다. 본 연구에서는 외부사건을 식별 및 선별하는 방법의 연구동향을 소개한다. 연구방법: 원자력발전소의 확률론적 안전성 평가를 위한 외부사건의 식별 및 선별에 관한 문헌조사를 실시하였다. 또한 국내외 외부사건의 식별 및 선별에 관한 규정을 조사하였다. 연구결과: 원자력발전소의 외부사건 영향분석의 비용을 최소화하고자 외부사건을 식별 및 선별하는 연구가 이루어지고 있다. 각 연구는 관점에 따라 차이를 보이지만 공통적으로 식별과정에서는 원자력발전소 부지에서 발생할 수 있는 모든 사건을 식별하고자 하며, 선별과정에서는 정성적 기준과 정량적 기준을 바탕으로 외부사건을 선별한다. 결론:기후변화 등으로 인하여 자연재해의 강도가 변화하고 있어, 원자력발전소에 영향을 주는 외부사건을 식별 및 선별하는 과정이 중요해지고 있다. 따라서 본 논문에서는 외부사건을 식별과 선별하는 방법에 대해 조사하여 정리하였다. 국내의 경우 원자력발전소의 확률론적 안전성 평가를 위한 외부사건의 식별과 선별에 관한 연구가 미미한 실정이다. 또한 외부사건 정량적 선별과정에서 수행하는 '경계분석'과 '명백히 보수적인 분석' 방법에 관한 연구가 필요할 것으로 보인다.

• 대한산업공학회지
• /
• 제25권3호
• /
• pp.336-341
• /
• 1999

The problem of jointly determining the optimum process mean and screening limits for each market is considered in situations where there are several markets with different price/cost structures. The quality characteristic is assumed to be a normal distribution with unknown mean and known variance. A quadratic loss function is utilized for developing the economic model. Methods of finding the optimum process mean and screening limits are presented and a numerical example is given.

• 품질경영학회지
• /
• 제28권2호
• /
• pp.161-175
• /
• 2000

The problem of jointly determining the optimum process mem and screening limits for each market is considered in situations where there are several markets with different price/cost structures. Two inspection procedures are considered; an inspection based on the quality characteristic of interest, and an inspection based on a surrogate variable which is highly correlated with the quality characteristic. The quality characteristic is assumed to be a normal distribution with unknown mean and known variance. A Taguchi's quadratic loss function is utilized for developing the economic model for determining the optimum process mean and screening limits. A numerical example is given.

• 산업경영시스템학회지
• /
• 제35권4호
• /
• pp.1-9
• /
• 2012

Decisions on reliability screening rules and burn-in policies are determined based on the estimated reliability. The variability in a semiconductor manufacturing process does not only causes quality problems but it also makes reliability estimation more complicated. This study investigates the nonuniformity characteristics of integrated circuit reliability according to defect density distribution within a wafer and between wafers then develops optimal burn-in policy based on the estimated reliability. New reliability estimation model based on yield information is developed using a spatial stochastic process. Spatial defect density variation is reflected in the reliability estimation, and the defect densities of each die location are considered as input variables of the burn-in optimization. Reliability screening and optimal burn-in policy subject to the burn-in cost minimization is examined, and numerical experiments are conducted.

• Asian Pacific Journal of Cancer Prevention
• /
• 제14권12호
• /
• pp.7301-7307
• /
• 2013

Background: Conspicuous differences in participation rates for breast self-examination (BSE), clinical breast examination (CBE), and referral for further investigations have been observed indicating involvement of a number of different factors. This study analysed determinants for participation in different levels of the breast cancer screening process in Indian females. Materials and Methods: An intervention group of 52,011 women was interviewed in a breast cancer screening trial in Trivandrum district, India. In order to assess demographic, socio-economic, reproductive, and cancer-related determinants of participation in BSE, CBE, and referral, uni- and multi-variate logistic regression was employed. Results: Of the interviewed women, 23.2% reported practicing BSE, 96.8% had attended CBE, and 49.1% of 2,880 screen-positives attended referral. Results showed an influence of various determinants on participation; women who were currently not married or who had no family history of cancer were significantly less likely to attend the screening process at any level. Conclusions: Increasing awareness about breast cancer, early detection methods, and the advantages of early diagnoses among women, and their families, as well as health care workers offering social support, could help to increase participation over the entire screening process in India.

• Industrial Engineering and Management Systems
• /
• 제8권3호
• /
• pp.131-138
• /
• 2009

The variable sampling inspection scheme with screening for the purpose of assuring the upper limit of maximum expected surplus loss after inspection has been proposed. In this inspection scheme, it has been assumed that a product lot consists of products manufactured through a single production line and lot quality characteristics follow a normal distribution. In the previous literature with respect to inspection schemes, it has been commonly assumed that lot quality characteristics obey a single normal distribution under the condition that all products are manufactured in the same condition. On the other hand, the production line is designed in order that the workload of respective processes becomes uniform from the viewpoint of line balancing. One of the solutions for the bottleneck process is to arrange the workshops in parallel. The lot quality characteristics from such a production line with the process consisting of some parallel workshops might not follow strictly the single normal distribution. Therefore, we expand an applicable scope of the above mentioned variable sampling inspection scheme with screening in this article. Concretely, we consider the variable sampling inspection with screening for the purpose of assuring the upper limit of average outgoing surplus quality loss in the production lots when the lot quality follows the mixed normal distribution.

• 산업공학
• /
• 제16권spc호
• /
• pp.65-69
• /
• 2003

Process capability has long been viewed as a critical performance measure to indicate how well a process meet the specifications and customer requirements. Several indices, including $C_p$ and $C_{pk}$, have been proposed and widely implemented to quantify the process capability. However, these indices have been obtained without regard to inspection or screening procedures through which finished products will be truncated at the specifications. Consequently, only a fraction of outgoing products within the specifications will be passed into the customers. From the customer's point of view, it will thus be meaningful to assess the process capability with truncated samples. This article investigates how to estimate the process capability when only incomplete truncated data are available. On the basis of parameter estimation for truncated samples, the proposed methodology may be helpful to evaluate the process capability by examining a sample of items from the lots submitted.