• Journal of information and communication convergence engineering
• /
• 제14권1호
• /
• pp.35-39
• /
• 2016

In this paper, we develop a 94-GHz single balanced mixer with low conversion loss using planar Schottky diodes on a GaAs substrate. The GaAs Schottky diode has a nanoscale anode with a T-shaped disk that can yield high cutoff frequency characteristics. The fabricated Schottky diode with an anode diameter of 500 nm has a series resistance of 21 Ω, an ideality factor of 1.32, a junction capacitance of 8.03 fF, and a cutoff frequency of 944 GHz. Based on this technology, a 94-GHz single balanced mixer was constructed. The fabricated mixer shows an average conversion loss of -7.58 dB at an RF frequency of 92.5 GHz to 95 GHz and an IF frequency of 500 MHz with an LO power of 7 dBm. The RF-to-LO isolation characteristics were greater than -32 dB. These values are considered to be attributed to superior Schottky diode characteristics.

• 대한전자공학회논문지
• /
• 제27권3호
• /
• pp.101-107
• /
• 1990

본 논문에서 유한차분법을 이용하여 Pt-GaAs Schottky Barrier Diode(SBD)를 일차원으로 simulation하였다. 반도체의 지배방정식인 포아송 방정식(poisson equation)과 전류연속 방정식)current continuity equation)을 이산화 시킨 다음 Newton-Raphson 방법으로 선형화시켜서 가우스 소거법으로 해가 수렴할 때까지 반복적으로 풀었다. 이 SBD의 해석에 필요한 경계조건은 열전자방출-확산이론(thermionic emission-diffusion theory)으로부터 Schottky Barrier의 경계조건을 취하였다. 에피층을 갖는 SBD를 모델링하여 인가전압에 따른 다이오드에서의 전위와 전자의 분포를 simulation 하였다. 전위에 따라 변하는 접속층을 고려하여 실험치와 잘 일치하는 결과를 얻었다.

• 한국재료학회지
• /
• 제19권1호
• /
• pp.28-32
• /
• 2009

Silicon carbide (SiC) is a promising material for power device applications due to its wide band gap (3.26 eV for 4H-SiC), high critical electric field and excellent thermal conductivity. The Schottky barrier diode is the representative high-power device that is currently available commercially. A field plate edge-terminated 4H-SiC was fabricated using a lift-off process for opening the Schottky contacts. In this case, Ni/Ti dual-metal contacts were unintentionally formed at the edge of the Schottky contacts and resulted in the degradation of the electrical properties of the diodes. The breakdown voltage and Schottky barrier height (SBH, ${\Phi}_B$) was 107 V and 0.67 eV, respectively. To form homogeneous single-metal Ni/4H-SiC Schottky contacts, a deposition and etching method was employed, and the electrical properties of the diodes were improved. The modified SBDs showed enhanced electrical properties, as witnessed by a breakdown voltage of 635 V, a Schottky barrier height of ${\Phi}_B$=1.48 eV, an ideality factor of n=1.04 (close to one), a forward voltage drop of $V_F$=1.6 V, a specific on resistance of $R_{on}=2.1m{\Omega}-cm^2$ and a power loss of $P_L=79.6Wcm^{-2}$.

• 한국전기전자재료학회논문지
• /
• 제27권4호
• /
• pp.199-202
• /
• 2014

The effect of neutron irradiation on the properties of SiC Schottky Diode has been investigated. SiC Schottky diodes were irradiated under neutron fluences and compared to the reference samples to study the radiation-induced changes in device properties. The condition of neutron irradiation was $3.1{\times}10^{10}$ $n/cm^2$. The current density after irradiation decreased from 12.7 to 0.75 $A/cm^2$. Also, a slight positive shift (${\Delta}V_{th}$= 0.15 V) in threshold voltage from 0.53 to 0.68 V and a positive change (${\Delta}{\Phi}_B$= 0.16 eV) of barrier height from 0.89 to 1.05 eV have been observed by the neutron irradiation, which is attributed to charge damage in the interface between the metal and the SiC layer.

• 전기전자학회논문지
• /
• 제26권2호
• /
• pp.306-312
• /
• 2022

서로 다른 PN 비율과 금속화 어닐링 온도에 의해 장벽 높이가 다른 4H-SiC 병합 PiN Schottky(MPS) 다이오드의 전기적 특성과 심층 트랩을 조사했다. MPS 다이오드의 장벽 높이는 IV 및 CV 특성에서 얻었다. 전위장벽 높이가 낮아짐에 따라 누설 전류가 증가하여 10배의 전류가 발생하였다. 또한, 심층 트랩(Z_1/2 및 RD_1/2)은 4개의 MPS 다이오드에서 DLTS 측정을 통해 밝혀졌다. DLTS 결과를 기반으로, 트랩 에너지 준위는 낮은 장벽 높이와 함께 22~28%의 얕은 수준으로 확인되었다. 이는 쇼트키 장벽 높이에 대해 DLTS에 의해 결정된 결함 수준 및 농도의 의존성을 확인할 수 있다.

• 전기학회논문지
• /
• 제56권5호
• /
• pp.938-943
• /
• 2007

In this paper, we show that, in case of piezoelectric micropower generator, just replacing Schottky diodes in the bridge rectifier with ultra-low reverse leakage current diodes improves the mechanical-to-electrical energy conversion efficiency by more than 100%. Experimental and PSPICE simulation results show that, due to the ultra-low leakage current, the charging speed of the circuit employing PAD1 is higher than that of the circuit employing Schottky diodes and the saturation voltage of the circuit employing PAD1 is also higher. This study suggests that , when the internal impedance of source is very large (a few tens of $M{\Omega}$) such that maximum charging current is a few microamperes or less, in order to realize literally the energy scavenging system, ultra-low reverse leakage current diodes should be used for efficient energy conversion. Since low-level vibration is ubiquitous in the environment ranging from human movement to large infrastructures and the mechanical-to-electrical energy conversion efficiency is much more critical for use of these vibrations, we believe that the improvement in the efficiency using ultra-low leakage diodes, as found in this work, will widen greatly the application of piezoelectric micropower generator.

• 전자공학회논문지A
• /
• 제31A권12호
• /
• pp.56-63
• /
• 1994

The effects of sulfur treatments on the barrier heithts of Schottky contacts and the interface-state density of metal-insulator-semiconductor (MIS) capacitors on InP have been investigated. Schottky contacts were formed by the evaporation of Al, Au, and Pt on n-InP substrate before and after (NH$_{4}$)$_{2}$S$_{x}$ treatments, respectively. The barrier height of InP Schottky contacts was measured by their current-voltage (I-V) and capacitance-voltage (C_V) characteristics. We observed that the barrier heights of Schottky contacks on bare InP were 0.35~0.45 eV nearly independent of the metal work function, which is known to be due to the surface Fermi level pinning. In the case of sulfur-treated Au/InP ar Pt/InP Schottky diodes, However, the barrier heights were not only increased above 0.7 eV but also highly dependent on the metal work function. We have also investigated effects of (NH$_{4}$)$_{2}$S$_{x}$ treatments on the distribution of interface states in Si$_{3}$N$_{4}$InP MIS diodes where Si$_{3}$N$_{4}$ was provided by plasma enhanced chemical vapor deposition (PECVD). The typical value of interface-state density extracted feom 1 MHz C-V curve of sulfur-treated SiN$_{x}$/InP MIS diodes was found to be the order of 5${\times}10^{10}cm^{2}eV^{1}$. This value is much lower than that of MiS diodes made on bare InP surface. It is certain, therefore, that the (NH$_{4}$)$_{2}$S$_{x}$ treatment is a very powerful tool to enhance the barrier heights of Au/n-InP and Pt/n-InP Schottky contacts and to reduce the density of interface states in SiN$_{x}$/InP MIS diode.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제7권2호
• /
• pp.82-87
• /
• 2007

The electrical properties of metallic junction diodes and metallic source/drain (S/D) Schottky barrier metal-oxide-semiconductor field-effect transistor (SB-MOSFET) were simulated. By using the abrupt metallic junction at the S/D region, the short-channel effects in nano-scaled MOSFET devices can be effectively suppressed. Particularly, the effects of trap states at the metal-silicide/silicon interface of S/D junction were simulated by taking into account the tail distributions and the Gaussian distributions at the silicon band edge and at the silicon midgap, respectively. As a result of device simulation, the reduction of interfacial trap states with Gaussian distribution is more important than that of interfacial trap states with tail distribution for improving the metallic junction diodes and SB-MOSFET. It is that a forming gas annealing after silicide formation significantly improved the electrical properties of metallic junction devices.

• 대한전자공학회논문지
• /
• 제9권3호
• /
• pp.22-28
• /
• 1972

새로운 전가산기회로를 제안하고 그 동작특성에 관하여 논한다. 회로는 Schottky-Barrier 다이오드 트랜지스터 터낼다이오드로서 구성되며 종래 제안되어 있는 회로의 동작제속도를 개선하고, 트랜지스터 베이스 바이어스전압의 압입 등 회로구성상의 결점을 제거하였다. 정특성곡선을 이용하여 회로구성소자의 최적치를 구하고, 회로동작에 관하여 고찰하였다.

• ETRI Journal
• /
• 제33권6호
• /
• pp.880-886
• /
• 2011

With the introduction of high-current 8-inch solar cells, conventional Schottky bypass diodes, usually adopted in photovoltaic (PV) panels to prevent the hot spot phenomenon, are becoming ineffective as they cause relatively high voltage drops with associated undue power consumption. In this paper, we present the architecture of an active circuit that reduces the aforementioned power dissipation by profitably replacing the bypass diode through a power MOS switch with its embedded driving circuitry. Experimental prototypes were fabricated and tested, showing that the proposed solution allows a reduction of the power dissipation by more than 70% compared to conventional Schottky diodes. The whole circuit does not require a dedicated DC power and is fully compatible with standard CMOS technologies. This enables its integration, even directly on the panel, thereby opening new scenarios for next generation PV systems.