• Proceedings of the IEEK Conference
• /
• 2003.07d
• /
• pp.1379-1382
• /
• 2003

Recently, mobile embedded systems used widly in various applications. Managing power consumption is becoming a matter of primary concern because those systems use limited power supply. As an approach reduce power consumption, voltage can be scaled down. according to the execution time and deadline. By reducing the supplying voltage to 1/N power consumption can be reduced to 1/N. DPM-S is a well known method for dynamic voltage scaling. In this paper, we enhanced DPM-S by using average execution time aggressively. The frequency of processor is calculated based in average execution time instead of worst case execution time. Simulation results show that our method achieve up to 5％ energy savings than DPM-S.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.486-490
• /
• 2002

When the fuzzy controller apply to a real plant, We have not excepted result of a satisfactory control by modeling error and lacking information about an plant. In this case, we have to adjust the scale factors for improvement of the control performance and this method need a lot of time and cost for perform a trial and error. In this paper, we proposed the fuzzy controller with the automatic adjustment of scaling factors. It was improve upon the control performance using a adequate scale factor by fuzzy logic and normalizer. As the results of simulation through the second order plant, we confirmed that the proposed the fuzzy controller within the function of automatic scale get a good response compare with the fuzzy controller within the fixed scale factor.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.12
• /
• pp.182-191
• /
• 2004

This study is focused on the development of a child human model, which is composed of skin, skeleton, joints and muscle, etc. The dimension of child outer skin is referred to anthropometric data from KRISS (Korea Research Institute of Standards and Science). The positions of joint and mass properties of body segments are calculated from ATB(Articulated Total Body) program, GEBOD. The properties of bones and muscles are obtained by the way of scaling from adult human model. To verify the developed human model, ROM simulation and sled test is conducted. Developed human model can be effectively applied to the evaluation of human injury in crash situation and development of child restraint system. The explicit finite element program $PAM-CRASH^TM$ was used to simulate six-year old child human model.

• Communications for Statistical Applications and Methods
• /
• v.22 no.3
• /
• pp.265-276
• /
• 2015

In this paper, we propose hierarchical cluster analysis and multidimensional scaling for joint distribution valued data. Information technology is increasing the necessity of statistical methods for large and complex data. Symbolic Data Analysis (SDA) is an attractive framework for the data. In SDA, target objects are typically represented by aggregated data. Most methods on SDA deal with objects represented as intervals and histograms. However, those methods cannot consider information among variables including correlation. In addition, objects represented as a joint distribution can contain information among variables. Therefore, we focus on methods for joint distribution valued data. We expanded the two well-known exploratory methods using the dissimilarities adopted Hall Type relative projection index among joint distribution valued data. We show a simulation study and an actual example of proposed methods.

• Journal of Institute of Convergence Technology
• /
• v.6 no.2
• /
• pp.9-13
• /
• 2016

Robot usually requires spline motion to move through multiple knots. In this paper, catmull-rom spline method is applied to the trajectory planning of industrial robot in task space. Centripetal catmull-rom is selected to avoid self-intersection and slow motion which can be occurred in uniform and chordal spline. The method to set two control points are proposed to satisfy velocity conditions of initial and final knots. To optimize robot motion, time scaling method is presented to minimize margin between real robot value and maximum value in velocity and acceleration. The simulation results show that the proposed methods are applied to trajectory planning and robot can follow the planned trajectory while robot motion does not exceed maximum value of velocity and acceleration.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.10a
• /
• pp.480-484
• /
• 2000

The channel length influence of n-channel Si-based FETs is investigated by computer simulation. Using a two-dimensional hydrodynamic model, devices having various gate length are examined. We have observed the characteristics of LDD model of MOSFET by investigating of their current, voltage, electric field and impact ionization. These devices are scaled using various factors. We have analyzed I-V characteristics and the effect of impact ionization according to channel length.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.2
• /
• pp.40-47
• /
• 1999

Focusing is widely used to increase the resolution in ultrasound transmit field. It increases signal levels returning from the mainlobe direction and decreases those due to sidelobe directions. However, when the sidelobes cannot be completely canceled, the resulting image resolution is greatly deteriorated. This paper proposes a method of improving the resolution by scaling the received signal according to the difference between the mainlobe and sidelobe levels computed in the frequency domain by the use of Fourier transform. The proposed method is verified by computer simulation and experiments, and is shown to be highly effective in narrowing the mainlobe width and decreasing the sidelobe levels.

• Journal of the Korea Society of Computer and Information
• /
• v.4 no.2
• /
• pp.135-140
• /
• 1999

This paper describes a affine transform coding which is reducing long time to take on image encoding by using scaling method and limited search area technique. For evaluating its performance, the proposed algorithm compare with Jacquin's method using traditional affine transform coding methods. Simulation results, the proposed algorithm considerably reduces encoding time by using scaling method and limited search area method. Also, the proposed algorithm provides much shorter encoding time with a little degradation of the decoded image quality than Jacquin's method.

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.113-116
• /
• 2002

This paper describes a design of 8192-Point pipelined FFT/IFFT processor (PFFTSk) core for DVB-T and DMT-based VBSL modems. A novel two-step convergent block floating -point (75_CBFP) scaling method is proposed to improve the signal- to-quantization-noise ratio (SeNR) of FFT/IFFT results. Our approach reduces about 80% of memory when compared with conventional CBFP methods. The PFFTSk core, which is designed in VHDL and synthesized using 0.25-${\mu}{\textrm}{m}$ CMOS library, has about 76,300 gates, 390k bits RAM, and Twiddle factor ROM of 39k bits. Simulation results show that it can safely operate up to 50-MHz clock frequency at 2.5-V supply, resulting that a 8192-point FFT/IFFT can be computed every 164-$mutextrm{s}$. The SQNR of about 60-dB is achieved.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.17 no.4
• /
• pp.279-294
• /
• 2013

We are interested in an adaptive grid method for hyperbolic equations. A multiresolution analysis, based on a biorthogonal family of interpolating scaling functions and lifted interpolating wavelets, is used to dynamically adapt grid points according to the physical field profile in each time step. Traditional finite-difference schemes with fixed stencils produce high oscillations around sharp discontinuities. In this paper, we hybridize high-resolution schemes, which are suitable for capturing singularities, and apply a finite-difference approach to the scaling functions at non-singular points. We use a total variation diminishing Runge-Kutta method for the time integration. The computational cost is proportional to the number of points present after compression. We provide several numerical examples to verify our approach.