• Nuclear Engineering and Technology
• /
• 제54권9호
• /
• pp.3415-3421
• /
• 2022

This paper is aimed to find out the impact of the geometrical parameters, mainly the radius and the height of a cylinder, on the SGEMP response including the famous scaling law in the classical cylinder model using a homemade PIC code UNIPIC-3D. We computed the electric fields at the center and at the edge on the emission head face with different radii and heights under normal X-rays incidence. The results show that the electric field will increase with the radius but decrease with the height. We analyze the scaling law that links the electric field product and fluence product, and whereafter an irreconcilable contradiction raises when the radius is changeable, which limits the application range of the scaling law. Moreover, the field-height-radius relation is found and described by a combination of logarithmic and minus one-quarter numerical fitting law firstly. Particle and magnetic field distributions are used to explain all the behaviors of the fields reasonably. All the findings will assist the evaluation of SGEMP response in spacecraft protection.

• Asian Journal of Atmospheric Environment
• /
• 제10권1호
• /
• pp.13-21
• /
• 2016

The vertical distributions of aerosol extinction coefficient were estimated using the scaling height retrieved at Gwangju, Korea ($35.23^{\circ}N$, $126.84^{\circ}E$) during a spring season (March to May) of 2009. The aerosol scaling heights were calculated on a basis of the aerosol optical depth (AOD) and the surface visibilities. During the observation period, the scaling heights varied between 3.55 km and 0.39 km. The retrieved vertical profiles of extinction coefficient from these scaling heights were compared with extinction profile derived from the Light Detection and Ranging (LIDAR) observation. The retrieve vertical profiles of aerosol extinction coefficient were categorized into three classes according to the values of AODs and the surface visibilities: (Case I) the AODs and the surface visibilities are measured as both high, (Case II) the AODs and the surface visibilities are both lower, and (Others) the others. The averaged scaling heights for the three cases were $3.09{\pm}0.46km$, $0.82{\pm}0.27km$, and $1.46{\pm}0.57km$, respectively. For Case I, differences between the vertical profile retrieved from the scaling height and the LIDAR observation was highest. Because aerosols in Case I are considered as dust-dominant, uplifted dust above planetary boundary layer (PBL) was influenced this discrepancy. However, for the Case II and other cases, the modelled vertical aerosol extinction profiles from the scaling heights are in good agreement with the results from the LIDAR observation. Although limitation in the current modelling of vertical structure of aerosols exists for aerosol layers above PBL, the results are promising to assess aerosol profile without high-cost instruments.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 추계학술발표회논문집(1)
• /
• pp.263-269
• /
• 1996

A comprehensive scaling method is proposed for a scaled-down facility simulating SBLOCA in the CARR passive reactor (CP-1300). The present method consists of two stages: scaling methodology, and validation of scaling methodology and code. The present scaling methodology is based on the integral response scaling method. Through sensitivity study, the condensation of the top of the CMT is identified as one of the little-known phenomenon with high importance which should be addressed for the applicability of the code. Using the similarity of the derived scaling parameters, the major component geometries of the scaled-down facility are determined. In the case of 1/4 height and 1/100 area ratio scaling, it is found out that the power ratio is the same as the area ratio, and the present scaling methodology generates the design parameters of the scaled-down facility without any distortion.

• 대한기계학회논문집B
• /
• 제23권11호
• /
• pp.1363-1370
• /
• 1999

A study of scaling and heat transfer has been carried out for a vertical tube evaporator in which $CaSO_4$ saturated water flows upward. Experimental apparatus including vacuum chambers and heaters has been designed and manufactured to study scaling phenomena for three different pressures(1atm, 0.27atm and 0.16atm). Overall heat transfer coefficients have been measured and shown to decrease with time as scaling proceeds. After the end of experiments, the vertical tube has been cut to measure the thickness of scale at different heights. Below the height where the bulk fluid temperature does not reach saturated temperature, the thickness of scale increases, however, beyond that height occurring saturated condition, the thickness does not vary much or even decreases a little. The measured fouling resistances also support these variations of scale thickness.

• Steel and Composite Structures
• /
• 제32권1호
• /
• pp.91-110
• /
• 2019

In the present study, the effects of six different ground motion scaling methods on inelastic response of nonlinear steel moment frames (SMFs) are studied. The frames were designed using energy-based PBPD approach with the design concept using pre-selected target drift and yield mechanism as performance limit state. Two target spectrums are considered: maximum credible earthquake spectrum (MCE) and design response spectrum (DRS). In order to investigate the effects of ground motion scaling methods on the response of the structures, totally 3216 nonlinear models including three frames with 4, 8 and 16 stories are designed using PBPD approach and then they are subjected to ensembles of ground motions including 42 far-fault and 90 near-fault pulse-type records which were scaled using the six different scaling methods in accordance to the two aforementioned target spectrums. The distributions of maximum inter-story drift over the height of the structures are computed and compared. Finally, the efficiency and reliability of each ground motion scaling method to estimate the maximum nonlinear inter-story drift of special steel moment frames designed by energy-based PBPD approach are statistically investigated, and the most suitable scaling methods with the lowest dispersion for two groups of earthquake ground motions are introduced.

• 한국연소학회지
• /
• 제17권4호
• /
• pp.30-37
• /
• 2012

The flame lengths and NOx emission characteristics of syngas $H_2$/CO turbulent non-premixed jet flames were investigated. The flame length which is the main parameter governs NOx emission was studied for various syngas compositions. The flame length was compared with previous correlation between Froude number and flame height and it shows that they have good agreements. It was confirmed that the turbulent jet flames herein investigated are in the region of buoyancy-momentum transition. NOx emission was reduced with increased Reynolds number and CO contents in syngas fuel and with decreased fuel nozzle diameter which is attributed by decreased flame residence time. Previous EINOx scaling based on flame residence time of $L_f^3/(d_f^2U_f)$ satisfies only the jet flame in momentum-dominated region, not buoyancy-momentum transition region. The simplified flame residence time ($L_f/U_f$) was adopted in modified EINOx scaling. The modified scaling satisfies the jet flames not only in momentum-dominated region but in buoyancy-momentum transition region. The scaling is also satisfied with $H_2$/CO syngas jet flames.

• 한국정보통신학회논문지
• /
• 제16권7호
• /
• pp.1463-1469
• /
• 2012

본 연구에서는 문턱전압이하 영역에서 이중게이트 MOSFET에서 스켈링 이론이 단채널효과에 미치는 영향을 관찰하였다. 기존 MOSFET의 경우 출력특성을 일정하게 유지하기 위하여 스켈링 이론을 적용하여 전류 및 스위칭 주파수를 해석하였다. 이중게이트 MOSFET에서 단채널효과에 대한 스켈링 이론의 적용 결과를 분석하기 위하여 문턱전압, 드레인유기장벽감소 및 문턱전압이하 스윙 등을 스켈링 인자에 따라 관찰하였다. 이를 위하여 이미 검증된 포아송방정식의 해석학적 전위분포를 이용하였다. 분석결과 단채널효과 중 문턱전압이 스켈링 인자에 가장 큰 영향을 받는다는 것을 관찰하였다. 특히 채널길이에 스켈링 이론을 적용할 때 가중치를 이용한 변형된 스켈링 이론을 적용함으로써 이중게이트 MOSFET에 가장 타당한 스켈링 이론에 대하여 설명하였다.

• Journal of Astronomy and Space Sciences
• /
• 제35권3호
• /
• pp.143-149
• /
• 2018

The ionosphere has been monitored by ionosondes for over five decades since the 1960s in Korea. An ionosonde typically produces an ionogram that displays radio echoes in the frequency-range plane. The trace of echoes in the plane can be read either manually or automatically to derive useful ionospheric parameters such as foF2 (peak frequency of the F2 layer) and hmF2 (peak height of the F2 layer). Monitoring of the ionosphere should be routinely performed in a given time cadence, and thus, automatic scaling of an ionogram is generally executed to obtain ionospheric parameters. However, an auto-scaling program can generate undesirable results that significantly misrepresent the ionosphere. In order to verify the degree of misrepresentation by an auto-scaling program, we performed manual scaling of all 35,136 ionograms measured at Jeju ($33.43^{\circ}N$, $126.30^{\circ}E$) throughout 2012. We compared our manually scaled parameters (foF2 and hmF2) with auto-scaled parameters that were obtained via the ARTIST5002 program. We classified five cases in terms of the erroneous scaling performed by the program. The results of the comparison indicate that the average differences with respect to foF2 and hmF2 between the two methods approximately correspond to 0.03 MHz and 4.1 km, respectively with corresponding standard deviations of 0.12 MHz and 9.58 km. Overall, 36 % of the auto-scaled results differ from the manually scaled results by the first decimal number. Therefore, future studies should be aware of the quality of auto-scaled parameters obtained via ARTIST5002. Hence, the results of the study recommend the use of manually scaled parameters (if available) for any serious applications.

• 한국지구과학회지
• /
• 제25권2호
• /
• pp.109-114
• /
• 2004

중력 포텐셜의 해석에 웨이브렛 변환 방법을 적용하였다. 웨이브렛을 만드는 단계 함수가 제안되었다. 단계 함수는 중력 포텐셜에서의 그린 함수로 대치될 수 있음이 보여졌다. 상향연속은 단계함수와의 컨볼루션 곧 웨이브렛 변환으로 표현될 수 있다. 단계인자는 높이 변화를 나타낸다. 다중경계는 각 단계에서의 웨이브렛 변환치의 국부 최대값을 연결하여 구해지며 이는 지층의 불연속면을 나타낸다. 다중경계 방법을 마산 창원지역의 중력자료에 적용하였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제5권2호
• /
• pp.69-76
• /
• 2005

Interface-trap density, lifetime and Schottky barrier height of erbium-silicided Schottky diode are evaluated using equivalent circuit method. The extracted interface trap density, lifetime and Schottky barrier height for hole are determined as $1.5{\times}10^{13} traps/cm^2$, 3.75 ms and 0.76 eV, respectively. The interface traps are efficiently cured by $N_2$ annealing. Based on the diode characteristics, various sizes of erbium- silicided/platinum-silicided n/p-type Schottky barrier metal-oxide-semiconductor field effect transistors (SB-MOSFETs) are manufactured from 20 m to 35nm. The manufactured SB-MOSFETs show excellent drain induced barrier lowering (DIBL) characteristics due to the existence of Schottky barrier between source and channel. DIBL and subthreshold swing characteristics are compatible with the ultimate scaling limit of double gate MOSFETs which shows the possible application of SB-MOSFETs in nanoscale regime.