• Journal of the East Asian Society of Dietary Life
• /
• v.15 no.4
• /
• pp.450-456
• /
• 2005

This study was performed to provide basic data that will predict the usefulness of buckwheat sprout as food materials. The quality characteristics of noodles prepared with buckwheat sprout powder were investigated The buckwheat sprout powder was added to the noodles in 0, 2, 4, 6, and $8\%$ in proportion to the weight of wheat flour, respectively. The added amounts of buckwheat sprout powder did not affect the volume of the noodles. The weight of noodles was decreased, whereas tumidity of the soup after cooking the noodles was increased with the increment of the amount of added buckwheat sprout powder. The color of powder mixture, wet noodles, and cooked noodles was changed by the addition of buckwheat sprout powder. Lightness(L) was decreased, whereas yellowness(b) and redness(a) increased as the amount of buckwheat sprout powder increased. In the texture analysis, hardness and chewiness of wet noodles were increased significantly by the addition of buckwheat sprout powder. Hardness, chewiness, and gumminess increased significantly in the cooked noodles with more than $6\%$ substitution of buckwheat sprout powder. Other textural properties did not show any significant changes. The results of sensory evaluation revealed that the overall preference of noodles with 2 to $4\%$ substitution of buckwheat sprout powder was better than other sample groups. Therefore, the appropriate amount of addition for the buckwheat sprout noodles was 2 to $4\%$ buckwheat sprout powder in proportion to the weight of wheat flour.

• Korean Journal of Optics and Photonics
• /
• v.16 no.6
• /
• pp.508-515
• /
• 2005

We propose a fabrication method for refractive lens by variable velocity moving mask lithography and slit pattern. Distribution of exposure dose should be controlled for the curved photoresist surface that works as a refractive surface. We analyze theoretically the distribution of exposure dose by change of moving velocity, moving direction of mask and the shape of mask pattern, and confirm for the curved surface experimentally. The lens could have sag height of a few of hundreds ${\mu}m$, by using thick photoresist or Deep RIE process.

• Korean Journal of Optics and Photonics
• /
• v.18 no.1
• /
• pp.50-55
• /
• 2007

Using the Selective Area Growth (SAG) technology of Metal Organic Chemical Vapor Deposition (MOCVD), we successfully integrated an active device and passive devices on the same substrate. In other words, we integrated a Semiconductor Optical Amplifier (SOA) as an active device and an S-bend waveguide and a Multi Mode Interference (MMI) waveguide as passive devices. The SOA is successfully integrated with passive devices on the same substrate. The Cross-Gain Modulation (XGM) characteristic of the integrated SOA and the loss of an MMI and an S-bend waveguide were measured. Measured XGM characteristics of the SOA showed an extinction ratio of 8.82 dB. The total loss of the MMI and S-bend waveguide was 18 dB.

• Korean Journal of Food Science and Technology
• /
• v.22 no.1
• /
• pp.38-43
• /
• 1990

Effects of concentration (5-8%, db) and heating temperature $(80^{\circ}C-95^{\circ}C)$ on rheological of mungbean starch were examined. The pasting curve by amylograph revealed no peak viscosity and the viscosity continued to increase during cooking, regardless the starch concentrations. Mungbean starch paste showed a pseudoplastic flow behavior with yield stress. The consistency index of paste increased as the heating temperature was raised at a given concentration. However, flow behavior index showed opposite trend. The percent sag of starch gel stored at $4^{\circ}C$ decreased with the increase of concentration and heating temperature. The firmness of fresh gel prepared from 7 and 8% starch suspensions by heating at $95^{\circ}C$ for 15 min with amylograph was about 2-times higher than that of 6% gel. However, the time constant, reciprocal of rate constant, of starch gels during aging at $4^{\circ}C$ was not significantly influenced by concentrations and heating temperatures.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.1
• /
• pp.64-72
• /
• 2013

Blind equalization is a technique that equalizes the received signals without the training sequence. Because of the absence of training sequence, we can increase the bandwidth efficiency due to the blind equalization system. And we must use the blind equalization for removing the ISI in mobile satellite communication receiver. ISI occurs due to mobility of users in mobile satellite communications. Blind equalization is suitable for the mobile satellite communication channels. In this blind equalization, it's very important to improve BER performance to apply the mobile satellite communication system. In this paper, we propose the blind beamforming equalization system using the beamforming, MUSIC algorithm and coordinate change method. We were confirmed by the simulation that the proposed system improves the BER performance.

• Korean Journal of Optics and Photonics
• /
• v.25 no.5
• /
• pp.273-278
• /
• 2014

We present an algorithm for surface reconstruction from the second-derivative data for free-form aspherics, which uses a subaperture scanning system that measures the local surface profile and determines the three second-derivative values at those local sampling points across the free-form surface. The three second-derivative data were integrated to get a map of x- and y-slopes, which went through a second Southwell integration step to reconstruct the surface profile. A synthetic free-form surface 200 mm in diameter was simulated. The simulation results show that the reconstruction error is 19 nm RMS residual difference. Finally, the sensitivity to noise is diagnosed for second-derivative Gaussian random noise with a signal to noise ratio (SNR) of 16, the simulation results proving that the suggested method is robust to noise.

• Journal of Korean Association for Spatial Structures
• /
• v.17 no.2
• /
• pp.21-32
• /
• 2017

The objective of this study is to analysis the mechanical characteristics on the geometric nonlinear behavior of radial cable roof systems for long span retractable cable roof structures. The retractable roof is designed as a full control system to overcome extreme outdoor environments such as extreme hot or cold weather, strong wind or sunlight, and the cable roof greatly can reduce roof weight compared to other rigid structural system. A retractable cable roof system is a type of structures in which the part of entire roof can be opened and closed. The radial cable roof is an effective structural system for large span retractable roofs, the outer perimeter of the roof is a fixed membrane roof and the middle part is a roof that can be opened and closed. The double arrangement cables of a radial cable truss roof system with reverse curvature works more effectively as a load bearing cables, the cable system can carry vertical load in up and downward direction. In this paper, to analyze the mechanical characteristics of a radial cable roof system with central posts, the authors will investigate the tensile forces of bearing cables, stabilized cables, ring cables, and the deflection of roof according to the height of the post or hub that affects the sag ratio of cable truss. The tensile forces of the cables and the deflection of the roof are compared for the cases when the retractable roof is closed and opened.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.3A
• /
• pp.360-367
• /
• 2006

In this paper, we designed a digital codec of an RFID tag for EPC global generation 2 class 1. There are a large number of studies on RRD standard and anti-collision algorithm but few studies on the design of digital parts of the RFID tag itself. For this reason, we studied and designed the digital codec hardware for EPC global generation 2 class 1 tag. The purpose of this paper is not to improve former studies but to present the hardware architecture, an estimation of hardware size and power consumption of digital part of the RFID tag. Results are synthesized using Synopsys with a 0.35um standard cell library. The hardware size is estimated to be 111640 equivalent inverters and dynamic power is estimated to be 10.4uW. It can be improved through full-custom design, but we designed using a standard cell library because it is faster and more efficient in the verification and the estimation of the design.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.6
• /
• pp.220-229
• /
• 2004

The AC railway system is quite differing from the general electric power system because it is single- phase and intermittently heavy loads. Thus, inevitably power quality problems are occurred in the AC railway system, i.e. voltage regulation voltage sags, voltage imbalance, and harmonic distortion. Recently, the power quality of the AC railway system becoming a hot issue because it is affect the control and safety of high-speed traction. In addition it is also affect the power quality of the electric power system. In this paper, single-phase Unified Power Quality Conditioner(UPQS) for the AC railway system is proposed to compensate the voltage sags and harmonic distortion. The configurations and control schemes of the proposed single-phase UPQC are presented. The effectiveness of the proposed single-phase UPQC application is verified by the PSCAD/EMTDC simulation works. It can be shown that the application of UPQC in the AC railway system is very useful to compensate the voltage sags and harmonic distortion from the results of related simulation works.

• Journal of Fashion Business
• /
• v.9 no.6
• /
• pp.12-28
• /
• 2005

The purpose of this study is to help develop high quality brassieres with functionality and comfort, fitting adolescents' physical features during their growth period. This study conducts a comparative analysis of juvenile brassiere and adult brassiere to identify the problems of brassieres in the market. The raw data for this study was processed by SPSS 10.1. The results of this study are summarized as follows: 1. The results of this survey show that the girls' satisfaction of their breasts has correlations between breast protrusion degree and volume. The girls think that if they have protrusive breasts their breast volume is big, and their breast satisfaction level shows high. 2. The results show that the objective of brassiere wearing is to prevent breasts sag and rupture, make good breast shape, balance their entire body shape, and make beautiful outer garment line. Brassiere functions are to prevent jiggle of breasts, make a good body line, and cover the nipples. For the grader school students, they are wearing brassiere to make a good balanced body and as their breasts developed, they are wearing brassiere for beautiful body shape not just to cover up their breasts. 3. In regard to brassiere cup size recognition, as students have higher grade at school, they have better recognition abouxt their cup size. As they are better aware of their cup size, they have better satisfaction with their cup size. Therefore, choosing the right size of brassiere for their bust is very important. 4. Girl students' brassiere preference shows that 317 students (56.9%) prefer white for brassiere colors, following pink and flesh color. Their most preferred brassiere material is cotton (354 people, 63.6%) because cotton is not sensitive even for weak skin. For brassiere style, 273 students (49%) prefer round style, following spots and mold. Their most preferred brassiere style is stake. In addition, brassiere should not press their breasts because their breasts are developing during puberty period.