• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.43 no.2
• /
• pp.206-215
• /
• 1994

A method for simulating general characteristics and temperature characteristics of discharging SCR of the capacitor discharge impulse magnetizer-magnetizing fixture system using SPICE is presented. This method has been developed which can aid the design, understanding and inexpensive, time-saving of magnetizing circuit. As the detailed characteristic of magnetizing circuit can be obtained, the efficient design of the magntizing circuit which produce desired magnet will be possible using our SPICE modeling. Especially, computation of the temperature rise of discharging SCR is very important since it gives some indication of thermal characteristic of discharging circuit. It is implemented on a 486 personal computer, and the modeling results are checked against experimental measures. The experimental results have been achived using 305[V] and 607[V] charging voltage, low-energy capacitor discharge impulse magnetizer-magnetizing fixture of air cleaner DC motor.

• 전자공학회논문지 IE
• /
• v.46 no.4
• /
• pp.8-15
• /
• 2009

In this paper, we are indicated CMOS Image sensor circuit SPICE analysis for the Photo Diode and pixel Modeling. We get a characteristic of the photoelectric current using a device simulator Medici and develop the Photodiode model for applying a SPICE simulation. For verifying the result, We compared the result of SPICE simulation with the result of mixed mode simulation about the testing circuit structure consisted photodiode and NMOS.

• Journal of the Korea Society of Computer and Information
• /
• v.9 no.3
• /
• pp.1-6
• /
• 2004

there needs a new Geographic information system development Technology of the abstraction, encapsulation, modulation and hierarchy using Graphic representation of object modeling Technique. The method is based on composite object of Graphic data with the hierarchy concepts and abstraction of Graphic information in order to improve data abstraction of the graphic data file and described concept of multiple inheritance and classification that supports a wide variety of graphic class such as mesh unit, layer. segment and so on. in simple case of software development using SPICE model and object modeling techniques. this thesis suggested object representation of Graphic data which can reduce software development life cycle and the cost of software maintenance.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2002.11a
• /
• pp.19-21
• /
• 2002

Electroded lamps operated at a high enough frequency can usually be modeled for the purpose of ballast design, as a resistor. Electrodeless fluorescent lamps include other components such as the arc tube's inductance. But that's impedance is small and so will be neglected in this paper. So, electrodeless fluorescent lamps is modeled as a resistor. A SPICE compatible model was developed for an electrodeless fluorescent lamp(OSRAM SYLVANIA ICETRON/ENDURA 150W).

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.503-505
• /
• 2007

효율적인 LCD Backlight 구동 시스템 설계를 위해서는 CCFL에 대한 전기적 특성 파악이 중요하지만 디스플레이의 대형화에 따라 LCD Backlight 램프는 길어지고 비선형 특성으로 인해 특성 표현이 곤란하여 회로 설계시 간략화된 등가 모델을 사용하게 되어 실제 인버터 제작과정에서 많은 시행착오를 거치게 한다. 회로 설계시 수식모델 적용을 위한 CCFL의 모델이 필요하며, 이러한 모델은 인버터를 효율적으로 설계할 수 있게 하므로서 설계에 필요한 시간과 자원 절감을 가능하게 한다. 본 논문에서는 42인치 LCD 구동인버터 설계에 필요한 CCFL의 수식 모델링을 IsSpice를 이용하여 구현하였으며, 회로 시뮬레이션과 실험을 통하여 모델의 타당성을 검증하였다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.2
• /
• pp.38-45
• /
• 2000

In this paper, an approach of modeling the optical interconnection system by SPICE simulation is presented. SPICE simulations with equivalent circuit models for optical devices are performed in a stable manner. From the simulated results, eye diagrams for receiver output and BER are obtained. Timing jitter due to laser diode turn-on delay effects can be found under various bias conditions. Using this approach, various system parameters such as bit rate, BER, dissipated transmitter power, and bias conditions can be optimized. It is expected that this approach will find useful applications such as Gigabit Ethernet and ATM.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.43 no.3
• /
• pp.381-387
• /
• 1994

In this paper, we found the improved SPICE heat transfer modeling of impulsed magnetizing fixture system and investigated temperature characteristics using the proposed model. As the detailed thermal characteristics of magnetizing fixture can be obtained, the efficient design of the impulsed magnetizing fixture which produce desired magnet will be possible using our heat transfer modeling. The knowledge of the temperature of the magnetizing fixture is very important of forecast the characteristics of the magnetizing fixture which produce desired magnet will be possible using our heat transfer modeling. The knowledge of the temperature of the magnetizing fixture is very important to forecast the characteristics of the magnetizing circuits under different conditions. The capacitor voltage was not raised above 810[V] to protect the magnetizing fixture from excessive heating. The purpose of this work is to compute the temperature increasing for different magnetizing conditions. The method uses multi-lumped model with equivalent thermal resistance and thermal capacitance. The reliable results are obtained by using iron core fixture (stator magnet of air cleaner DC motor) coupled to a low-voltage magnetizer(charging voltage : 1000[V], capacitor : 3825[$\mu$F]. The modeling and experimental results are in close aggrement.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.12
• /
• pp.24-29
• /
• 2009

In order to model the high temperature dependence of the cutoff frequency $f_T$ in $0.18{\mu}m$ deep n-well isolated bulk NMOSFET, high temperature data of electron velocity of bulk MOSFETs from $30^{\circ}C$ to $250^{\circ}C$ are obtained by an accurate RF extraction method using measured S-parameters. From these data, an improved temperature-dependent electron velocity equation is developed and implemented in a BSIM3v3 SPICE model to eliminate modeling error of a conventional one in the high temperature range. Better agreement with measured $f_T$ data from $30^{\circ}C$ to $250^{\circ}C$ are achieved by using the SPICE model with the improved equation rather than the conventional one, verifying its accuracy of the improved one.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.4
• /
• pp.7-12
• /
• 2010

We have developed a SPICE compatible model of thermoelectric devices, and a parameter extracting technique only by electrical and temperature measurement by using Harman method was proposed. The proposed model and parameter extraction technique do not require experimental data from thermal conductivity measurements. The maximum error between extracted parameters extracted by proposed method and conventional method was about 14%, which is not a severe mismatch for real application. The proposed model is applicable to design of both for thermoelectric coolers and thermo electric generators.

• Journal of Sensor Science and Technology
• /
• v.22 no.1
• /
• pp.44-48
• /
• 2013

For a successful commercialization of microbolometer, it is required to develop a robust package including thermal stabilizing mechanism. In order to regulate the temperature within some operating range, thermoelectric cooler is generally used but it's not easy to model the whole package due to the coupled physics nature of thermoelectric cooler. In this paper, SPICE-compatible modeling methodology of a microbolometer package is presented, whose steady-state results matched well with FEM results at the maximum difference of 5.95%. Although the time constant difference was considerable as 15.7%, it can be offset by the quite short simulation time compared to FEM simulation. The developed model was also proven to be useful for designing the thermal stabilizer through parametric and transient analyses under the various working conditions.