• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2005년도 춘계학술대회논문집
• /
• pp.235-239
• /
• 2005

This paper gives a field-test method and result of PQM(Power Quality Meter) and PQMS(Power Quality Management System). The field-test was carried out as our own method. So, the test method has several kinds of improvement in this paper because it is first time to try the field-test of the equipment. However, we expect that the test result of PQM & PQMS has been used as a reference data which makes a scheme of evaluating performance of the equipment that has been used or is developed.

• 조명전기설비학회논문지
• /
• 제27권8호
• /
• pp.90-97
• /
• 2013

In recent years, the many electric saving methods are studied because of difficulty of meeting the demand. The electric energy management such as monitoring of branch power consumption, demand control, metering, power quality monitoring, electric safety monitoring can make energy saving. The purpose of this paper is to develop a system which can provide the integrated management of various functions required for energy management by consumers. In this system all functions which were embodied into each devices are integrated into intelligent meter. The developed systems are tested and implemented by installing at consumer electric distribution panel.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 D
• /
• pp.2124-2125
• /
• 2006

실세계의 복잡하고 종합적인 정보를 빠르고 효율적으로 분석 처리할 수 있는 지리정보시스템(GIS : Geographic Information System)의 효용성이 인식되면서 전력산업에서도 전국의 시설물 관리를 위해 수치 지리정보를 구축하였다. 한편, 약 10만호의 고압고객을 대상으로 15분 단위의 전력사용량을 무선통신망을 이용하여 자동원격검침(AMR: Automatic Meter Reading)하고 있다. 본 논문에서는 산재된 대용량의 AMR 시계열성 데이터와 공간성을 지니는 배전계통 지리정보 데이터를 이용하여 회선 및 구간별 상세한 부하패턴 분석, 공간적 부하분포 및 특성 분석을 할 수 있는 새로운 활용모델을 개발하고 그 결과를 제시하고자 한다.

• 전기학회논문지
• /
• 제59권10호
• /
• pp.1712-1717
• /
• 2010

To analyze the load of distribution line, real LPs (Load Profile) of AMR (Automatic Meter Reading) customers and VLPs (Virtual Load Profile) of non-AMR customers are required. Accuracy of VLP is an important factor to improve the analysis performance. There are 2 kinds of methods to generate the VLP; one is using ALP (Average Load Profile) per each industrial code and PNN (Probability neural networks) algorithm; the other is using LSI (Load Shape Index) and C5.0 algorithm. In this paper, existing researches are studied, and new method is suggested. Each methods are compared the performance with same LP data of real high voltage customers.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2006년도 전력전자학술대회 논문집
• /
• pp.462-464
• /
• 2006

본 연구는 제4세대 미터링(Metering) 기술을 이용한 전력전자상거래 즉 VSEM(Value Storage Electricity Meter)을 위한 웹기반 미터링 시스템의 보안성 분석 및 평가에 관한 연구이다. 특히 수요자 측면에서 스마트카드(지불결제)를 이용한 본인 확인(SIM카드), 키 값 확인, VSEM서버에서의 각 수요자와 공급자 데이터 사이의 무결성 확인(Integrity)과 부인 방지(Non-repudiation)를 위한 기존 시스템의 보안 문제를 분석하고 이를 해결할 수 있는 보안 모델을 제안한다.

• KIEAE Journal
• /
• 제6권4호
• /
• pp.33-39
• /
• 2006

This study aims to investigate the method to reduce the surface temperature caused by insolation. To achieve this goal, surface temperature of building is measured and the effects of exterior material's color and brilliance were checked with infrared imaging. And also, exterior material's absorptances due to outdoor surface heat transfer coefficients were measured. After surface temperature measurement of 37 specimen of 5 categories, the temperature is the highest on wood($53.62^{\circ}C$) and panel($52.05^{\circ}C$). Dryvit, stone, brick is the rating of order. For exterior material's absorptances, panel(0.883) and wood(0.868) were high and Dryvit, stone, brick follows wood and panel.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
• /
• pp.133-136
• /
• 1987

This paper presents a new algorithm of optimal measurement system by using band matrix characteristic respectively for state estimation. A performance index of measurement system is established to reflect relation among measurement sets, probability of measurement failure and cost of individual meter installation. Selection ranking in the candidates of measurement sets is composed to guarantee the observability for any any single meter outage. Performance index sensitivity is introduced and recursive formula which based on the matrix inversion lemma used for selection. The proposed algorithm is composed of successive addition algorithm, successive elimination algorithm and combinatorial algorithm. The band matrix characteristic could save in memory requirements and calculate the performance index faster than earlier.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.1402-1406
• /
• 2004

As a method of confirming light flickering, we tried to confirm the flicker index measured by Flickermeter and the application possibility by using digital intensity of illumination meter. Also, after simulating the quality deterioration of electric power and generating a various voltage change, we studied on the function between the flicker index measured by Flickermeter and the flicker index for the intensity of illumination by using digital intensity of illumination meter.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.777-782
• /
• 2005

In this paper, we designed and fabricated a partial discharge (PD) detector to diagnose the soundness of CNCV cables by analyzing PD pulses and to predict discharge locations. The PD detector is consisted of a coupling network with a discharge free capacitor and a detection impedance, a voltage follower and a low noise amplifier. Lower cut-off frequency of the detector is adjusted at 175kHz to block AC voltage and to pass discharge pulse only. The discharge location could be obtained by the time of arrival method using travelling wave propagation theory. In a laboratory test on an eighty meter CV cable, we could position the discharge location within a two meter error.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2010년도 학술발표회
• /
• pp.472-477
• /
• 2010

자동유량측정시설은 연속적인 유량자료를 측정하기 위해 운영되는 실시간-무인화 유량측정 시스템이다. 현재 국내 외에서 유량측정을 위해 설치 및 운영되고 있는 자동유량측정시설은 대부분 초음파유속계를 이용하고 있는는데, 초음파유속계는 유속을 측정하는 방식에 따라 크게 도플러방식 초음파유속계(ADVM, Acoustic Doppler Velocity Meter)와 이동시간차방식 초음파유속계(UVM, Ultrasonic Velocity Meter)로 분류된다. 본 연구에서는 각 방식별로 유량산정방법을 개선하기 위해 설치 운영 중인 자동유량측정시설 중 고령교 지점의 ADVM 방식과 여주, 적성 지점의 UVM 방식을 대상으로 측정성과에 대한 문제점을 분석하고 통계적인 방법을 통해 오측유속을 제거하거나 방식별 또는 지점별 특성을 고려하여 적절한 유량산정방법을 적용하였다. 그 결과 3개 지점에 대한 검증유량과의 평균 상대오차율은 모두 10% 이내로 나타났다.