• Nuclear Engineering and Technology
• /
• 제52권12호
• /
• pp.2887-2900
• /
• 2020

Cladding failure in a fuel rod during operation in a BWR is analyzed using a FALCON code-based model. Comparative calculation with a neighbouring, intact rod is presented, as well. A considerable 'hot spot' effect in cladding temperature is predicted with the SLICE-DO model due to a thermal barrier caused by the localized crud deposition. Particularly significant overheating is expected to occur on the affected side of the cladding of the failed rod, in agreement with signs of significant localized crud deposition as revealed by Post Irradiation Examination. Different possibilities (criteria) are checked, and Pellet-Cladding Mechanical Interaction (PCMI) is shown to be one of the plausible potential threats. It is shown that PCMI could lead to discernible concentrated inelastic deformation in the overheated part of the cladding. None of the specific mechanisms considered can be experimentally or analytically identified as an only cause of the rod failure. However, according to the current calculation, a possibility of cladding failure by PCMI cannot be excluded if the crud thickness exceeded 300 ㎛.

• Imaging Science in Dentistry
• /
• 제34권1호
• /
• pp.13-18
• /
• 2004

Purpose : This study was to evaluate the influence of slice thickness of computed tomography (CT) and rapid protyping (RP) type on the accuracy of 3-dimensional medical model. Materials and Methods: Transaxial CT data of human dry skull were taken from multi-detector spiral CT. Slice thickness were 1, 2, 3 and 4 mm respectively. Three-dimensional image model reconstruction using 3-D visualization medical software (V-works /sup TM/ 3.0) and RP model fabrications were followed. 2-RP models were 3D printing (Z402, Z Corp., Burlington, USA) and Stereolithographic Apparatus model. Linear measurements of anatomical landmarks on dry skull, 3-D image model, and 2-RP models were done and compared according to slice thickness and RP model type. Results: There were relative error percentage in absolute value of 0.97, 1.98,3.83 between linear measurements of dry skull and image models of 1, 2, 3 mm slice thickness respectively. There was relative error percentage in absolute value of 0.79 between linear measurements of dry skull and SLA model. There was relative error difference in absolute value of 2.52 between linear measurements of dry skull and 3D printing model. Conclusion: These results indicated that 3-dimensional image model of thin slice thickness and stereolithographic RP model showed relative high accuracy.

• 대한의생명과학회지
• /
• 제24권4호
• /
• pp.418-425
• /
• 2018

Amyloid brain positron emission tomography (PET) images are visually and subjectively analyzed by the physician with a lot of time and effort to determine the ${\beta}$-Amyloid ($A{\beta}$) deposition. We designed a convolutional neural network (CNN) model that predicts the $A{\beta}$-positive and $A{\beta}$-negative status. We performed 18F-florbetaben (FBB) brain PET on controls and patients (n=176) with mild cognitive impairment and Alzheimer's Disease (AD). We classified brain PET images visually as per the on the brain amyloid plaque load score. We designed the visual geometry group (VGG16) model for the visual assessment of slice-based samples. To evaluate only the gray matter and not the white matter, gray matter masking (GMM) was applied to the slice-based standard samples. All the performance metrics were higher with GMM than without GMM (accuracy 92.39 vs. 89.60, sensitivity 87.93 vs. 85.76, and specificity 98.94 vs. 95.32). For the patient-based standard, all the performance metrics were almost the same (accuracy 89.78 vs. 89.21), lower (sensitivity 93.97 vs. 99.14), and higher (specificity 81.67 vs. 70.00). The area under curve with the VGG16 model that observed the gray matter region only was slightly higher than the model that observed the whole brain for both slice-based and patient-based decision processes. Amyloid brain PET images can be appropriately analyzed using the CNN model for predicting the $A{\beta}$-positive and $A{\beta}$-negative status.

• 전자공학회논문지S
• /
• 제35S권9호
• /
• pp.63-69
• /
• 1998

본 논문에서는 MPEG-2를 이용한 압축에서 이미 압축되어 있는 영상 시퀀스내의 하나 또는 여러개의 GOP (Group of Picture)를 새로운 GOP로 교체하는 편집응용에 필수적인 사용비트량의 정합을 위한 새로운 비트율 제어방법을 제안하였다. 이전영상의 양자화값을 영상전체에 동일하게 적용하여 목표비트에 근접할때까지 반복적으로 영상을 부호화하고 각 슬라이스의 사용비트량을 기록한다. 영상단위의 양자화값 변화로는 목표 비트를 더이상 맞추지 못하므로 기록된 비트량을 이용하여 목표비트에 가장 근접하도록 슬라이스별 양자화값을 조절한 후 최종적으로 각 매크로블럭의 활동도를 참고하여 매크로블럭의 양자화값을 결정하였다. 실제영상에 적용하였을 경우 MPEG-2 Test Model 5에 비해 유사한 PSNR을 보였고 목표비트에 대한 비트에러량은 각 영상당 대략 수 내지 수십비트 이내로 줄임으로써 제안알고리듬의 유효성을 보였다.

• 대한의생명과학회지
• /
• 제25권1호
• /
• pp.99-106
• /
• 2019

Amyloid positron emission tomography (PET) allows early and accurate diagnosis in suspected cases of Alzheimer's disease (AD) and contributes to future treatment plans. In the present study, a method of implementing a diagnostic system to distinguish ${\beta}$-Amyloid ($A{\beta}$) positive from $A{\beta}$ negative with objectiveness and accuracy was proposed using a machine learning approach, such as the Principal Component Analysis (PCA) and Support Vector Machine (SVM). $^{18}F$-Florbetaben (FBB) brain PET images were arranged in control and patients (total n = 176) with mild cognitive impairment and AD. An SVM was used to classify the slices of registered PET image using PET template, and a system was created to diagnose patients comprehensively from the output of the trained model. To compare the per-slice classification, the PCA-SVM model observing the whole brain (WB) region showed the highest performance (accuracy 92.38, specificity 92.87, sensitivity 92.87), followed by SVM with gray matter masking (GMM) (accuracy 92.22, specificity 92.13, sensitivity 92.28) for $A{\beta}$ positivity. To compare according to per-subject classification, the PCA-SVM with WB also showed the highest performance (accuracy 89.21, specificity 71.67, sensitivity 98.28), followed by PCA-SVM with GMM (accuracy 85.80, specificity 61.67, sensitivity 98.28) for $A{\beta}$ positivity. When comparing the area under curve (AUC), PCA-SVM with WB was the highest for per-slice classifiers (0.992), and the models except for SVM with WM were highest for the per-subject classifier (1.000). We can classify $^{18}F$-Florbetaben amyloid brain PET image for $A{\beta}$ positivity using PCA-SVM model, with no additional effects on GMM.

• 대한기계학회논문집A
• /
• 제24권3호
• /
• pp.769-776
• /
• 2000

RP(Rapid Prototyping) technology is gaining its popularity in building a prototype in all industries. SLS(Slective Laser Sintering) is one of RP technologies, which is focused on tooling processes as well as three dimension solid model. There are several factors, the length and the cross-sectional area of a part, that have an effect on build setup in SLS process. In this paper, the computation on geometrical relationship is used to slice STL file and to estimate these factors. Based on these values, the build setup parameters such as the heating temperature, the laser power, and the powder cartridge feed rate are determined by neural network approaches. The test results show that the computation time is saved and the neural network approach is able to apply to get the optimal parameters of build process within an acceptable error rate.

• Nuclear Engineering and Technology
• /
• 제52권1호
• /
• pp.135-147
• /
• 2020

A methodology for evaluation of mechanical and thermal effects of localized non-axisymmetric oxidation in zircaloy claddings on LWR fuel reliability is proposed. To this end, the basic capabilities of the FALCON fuel behaviour code are used. Examples of methodology application to adjustment of selected operational limits for modern BWR fuel rods, to capture effects of the excess local oxidation, are presented. Specifically, the limiting rod internal pressure for the onset of cladding lift-off is reduced, depending on initial excess oxidation spot sizes. Also, the power limits for Anticipated Operational Occurrences are adjusted, to preclude fuel melting and cladding failure due to PCMI and PCI-SCC in the affected fuel rods.

• 한국멀티미디어학회논문지
• /
• 제22권10호
• /
• pp.1168-1177
• /
• 2019

In order to diagnose and prevent Alzheimer's Disease (AD), it is becoming increasingly important to develop a CAD(Computer-aided Diagnosis) system for AD diagnosis, which provides effective treatment for patients by analyzing 3D MRI images. It is essential to apply powerful deep learning algorithms in order to automatically classify stages of Alzheimer's Disease and to develop a Alzheimer's Disease support diagnosis system that has the function of detecting hippocampus and CSF(Cerebrospinal fluid) which are important biomarkers in diagnosis of Alzheimer's Disease. In this paper, for AD diagnosis, we classify a given MRI data into three categories of AD, mild cognitive impairment, and normal control according by applying 3D brain MRI image to the Faster R-CNN model and detect hippocampus and CSF in MRI image. To do this, we use the 2D MRI slice images extracted from the 3D MRI data of the Faster R-CNN, and perform the widely used majority voting algorithm on the resulting bounding box labels for classification. To verify the proposed method, we used the public ADNI data set, which is the standard brain MRI database. Experimental results show that the proposed method achieves impressive classification performance compared with other state-of-the-art methods.

• 한국전자통신학회논문지
• /
• 제8권1호
• /
• pp.191-197
• /
• 2013

방사선과 의사들은 CT 및 MRI 스캐너로부터 얻어진 인체의 단면 영상을 연속적으로 보고 실제 3차원적으로 인체가 어떻게 구성되어 있는지를 상상하여 병변을 구별하는데, 의학영상을 이용한 인체 장기의 3차원 시각화는 2차원 형태의 인체 단면 영상들을 복잡한 알고리즘이나 고성능의 컴퓨팅 파워를 사용하여 실제 인체와 같이 3차원으로 재구성하여 보여준다. 단면 영상의 추적, 관심영역의 표시 및 추출등과 같은 2차원 영상분석은 시간이 많이 소모되고, 주관적일 수가 있으며, 수작업인 관계로 빈번한 에러가 발생하는 단점을 가지는데, 이와 같은 2차원 의료 영상 분석의 단점을 보완하기 위해 의학영상처리 기술과 접목한 3차원 의료 영상의 시각화는 필수적이라 할 수 있다. 명암값 임계치 방법, 영역확장(region growing) 방법, 윤곽선(contour) 추출 방법 및 변형모델(deformable model) 방법을 사용하여 인체의 각 장기를 분리하였으며, 텍스쳐분석(texture analysis)을 통하여 고안된 특징자를 이용하여 암 부분을 인식하는데 사용하였고, 원근투영(perspective projection) 및 볼륨 데이터의 표면을 렌더링하기 위해 마칭큐브(marching cube) 알고리즘을 사용하였다. 인체 및 분리된 장기에 대한 3차원 시각화는 방사선치료계획(radiation treatment planning), 외과 수술계획, 모의수술, 중재적(interventional)시술 및 영상유도수술(image guided surgery)에 효과적으로 사용될 수 있다.