• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.14
• /
• pp.53-64
• /
• 1973

The studies reported herein were conducted to investigate the effect of thermal conditions in double-cropping of rice. The accumulated daily mean and minimum air temperatures, for the period of the last 30 years, were examined at the 10 different meteorogical stations which are located in the southern part of Korea. The results obtained could be summarized as follows: 1. The first cropping. a. It seemed to be free from any frost-damage of rice at the seeding stage at Yeosu, Pusan and Cheju. However, it was found that there were some dangers of frost damage for about 30 to 40 day at Iri, Chonju and Kwangju, for 18 to 28 days at Daeku and Ulsan, and for 4 to 14 days at Mokpo and Pohang, respectively. b. The early critical transplanting date seemed to be from middle to late-April in the first cropping. As compared with the ordinary lowland seedlings, the semi-protected and upland ones could be planted 5 and 10 days earlier, respectively. c. The early critical heading date was about late-June and there were some low-temperature damages for 8 to 25 days at young-ear formation stage of rice plant, depending upon location. d. The early critical ripening date (the early critical transplanting date of the 2nd cropping) was from late-July to early-August. It took about 32 to 39 days in ripening. There was a tendency of SS${\fallingdotseq}$SL$15^{\circ}C$ (${\theta}$15) and the minimum of $10^{\circ}C$ (${\theta}$10), the ten locations could be devided into two ripening groups of ${\theta}$15>${\theta}$10 and ${\theta}$15<${\theta}$10. c. The late critical ripening date was around October 9 at Iri, Chonju, Kwangju and Daeku and around October 28 at Mokpo, Yeosu, Pusan and eheju. Three to four days were more required for a complete ripening of rice, as compared with the above dates. d. There was an overlap of about 12 to 42 days between the first and second cropping when early-maturing varieties requiring an accumulated mean air temperature of $1, 550^{\circ}C$, from transplanting to heading, were grown. Therefore, some varieties which could head with an accumulated daily mean air temperature of 1, 000 to $1, 200^{\circ}C$, should be either developed or some new cultural technology be established in order to have a successful double cropping in rice.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.1
• /
• pp.14-19
• /
• 2007

This study was conducted to analyze the antioxidant activity and xanthine oxidase inhibitory effect of hot-water extracts from Elaeagnus multiflora Thunb. to provide fundamental data for the development of functional materials. The antioxidative activities of hot-water extracts from E. multiflora Thunb. were analyzed by electron donating ability (EDA) using 1,1-diphenyl-2-picryl hydrazyl (DPPH), superoxide dismutase (SOD) -like activity by pyrogallol and nitrite scavenging ability. EDA of extracts from unripe, ripe, and overripe fruits were 77.7%, 36.0%, and 23.7% at 100 ${\mu}g/mL$, respectively, and EDA of extract in unripe fruits was higher than those of others. At 1,000 $\mu$g/mL, the SOD-like activities were 32.8%, 11.2% and 5.0% for unripe, ripe, and overripe fruits, respectively. The SOD-like activity was increased along with the increase of unripe and ripe extract concentrations. The nitrite scavenging ability of unripe fruit extracts in 100, 300, 500 ${\mu}g/mL$ of extraction solution in pH 1.2 and 3.0 was higher than those of others. The nitrate scavenging ability of all extracts was decreased according to the increase of pH. Xanthine oxidase inhibitory activities of unripe, ripe and overripe fruits were 30.0%, 28.2%, and 18.2% at 1,000 ${\mu}g/mL$, respectively.

• Proceedings of the Korean Society of Embryo Transfer Conference
• /
• 1997.05a
• /
• pp.9-15
• /
• 1997

치밀 난구세포로 둘러싸인 소 난자를 $38^{circ}C$. 5% $CO_2$ 배양기에시 5% superovulated cow serum(SCS)이 첨가된 m-TCM 199 medium 으로 $20{\sim}22$ 시간 배양하였으며, 수정능이 획득된 정자와 체외수정하였다. 7일${\sim}$8일경의 수정란을 1.3M methyl cellosolve(MC), 1.1M diethylene glycol(DEG), 1.8M ethylene glycol(EG), 1.6M propylene glycol(PG) 및 1.1M 1,3-butylene glycol(BG) 용액에서 10분간 평형시킨 후 0.25 ml 스트로내에 장전하였다. 스트로를 $0^{\circ}C$의 alcohol bath freezer에 넣고 $-6^{\circ}C$까지 $-1^{\circ}C$/분 속도로 냉각, 식빙 후 10분간 정체시켰으며, $-0.3^{\circ}C$/분 또는 $-0.5^{\circ}C$/분으로 $-30^{\circ}C$까지 냉각 후 스트로를 액체질소에 침지하여 보관하였다. 수정란이 들어있는 스트로를 $30^{\circ}C$ 온수에서 융해하였으며, 수정란을 TCM 199 medium 으로 옮긴 후 5% SCS가 첨가된 TCM 199 medium 에서 48시간 배양하였다. 수정란이 양호한 형태를 유지하며 나중의 발육단계로 진행된 것을 생존한 것으로 간주하였다. 각 종류의 동해방지제에서 동결된 수정란의 일부는 융해 후 동해방지제를 제거하지 않고 직접 비외과적으로 이식하였다. 동결-융해 후 동해방지제의 종류에 따른 탈출배반포 발달율은 EG 50.0%, MC 53.6%, DEG 56.9%, PG 58.0% 그리고 BG 11.5%였다. $-0.3^{\circ}C$/분 또는 $-0.5^{\circ}C$/분 으로 냉각한 수정란의 생존율은 두 그룹간에 유의적인 차이가 없었으나 (P<0.05), 탈출배반포 발달율은 -0.5분 $^{\circ}C$/분(22.6%, 12/53)보다 $-0.3^{\circ}C$/분(64.6%, 31/48) 냉각시에 유의적으로 높았다(P<0.01). 동해방지제의 종류에 따른 수정란의 수태율은 MC 48%(10/21). DEG 30%(3/10), EG 74%(20/27) 및 PG 40%(4/10) 였다. 이러한 결과로 보아 MC, DEG, EG 그리고 PG는 소의 체외수정란의 동결을 위한 동해방지제로서 이용될 수 있음을 보여주었다.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.2
• /
• pp.18-25
• /
• 2008

The current display systems including TVs are going digital and large-sized, and high visual quality of those systems becomes a very important selling point in the current display system market. Thus, various researches have been carried out for enhancing the visual quality of digital display systems. One of the important digital image(or video) enhancement techniques is sharpness enhancement, and it is generally based on a transient improvement technique that reduces the edge transition time. However, this technique often generates overshoot and undershoot, which cause undesirable pixel-level changes around the transient improved edge. In this paper, we propose a new nonlinear filter-based adaptive shoot elimination method for effectively suppressing the overshoot and undershoot that occur in the transient improvement, so that we can obtain visually sharper and clearer digital images(or videos). The proposed method uses two orthogonal directional min/max nonlinear filters with an adaptive shoot elimination scheme in order to effectively suppress the visually sensitive overshoot and undershoot. Experimental results show that the proposed method suppresses the overshoot and undershoot almost perfectly while maintaining the effect of the transient improvement. The applications of the proposed method include digital TVs, digital monitors, digital cameras/camcoders, portable media players(PMP), etc.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.2
• /
• pp.26-36
• /
• 2008

Due to the differential and low voltage swing, Low Voltage Differential Signaling(LVDS) has been widely used for high speed data transmission with low power consumption. This paper proposes new LVDS I/O interface circuits for more than 1.3 Gb/s operation. The LVDS receiver proposed in this paper utilizes a sense amp for the pre-amp instead of a conventional differential pre-amp. The proposed LVDS allows more than 1.3 Gb/s transmission speed with significantly reduced driver output voltage. Also, in order to further improve the power consumption and noise performance, this paper introduces an inductance impedance matching technique which can eliminate the termination resistor. A new form of unfolded impedance matching method has been developed to accomplish the impedance matching for LVDS receivers with a sense amplifier as well as with a differential amplifier. The proposed LVDS I/O circuits have been extensively simulated using HSPICE based on 0.35um TSMC CMOS technology. The simulation results show improved power gain and transmission rate by ${\sim}12%$ and ${\sim}18%$, respectively.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.1
• /
• pp.77-85
• /
• 2000

To investigate the practical assessing method of pork quality, 302 carcasses were selected randomly to represent commercial conditions and were probed at 24 hr postmortem (PM) by Danish Meat Quality Marbling (MQM), Hennessy Grading Probe (HGP), Sensoptic Resistance Probe (SRP) and NWK pH-K21 meter (NpH). Also, filter paper wetness (FPW), lightness (L*), ultimate pH (pHu), subjective color (SC), firmness/wetness (SF) and marbling scores (SM) were recorded. Each carcass was categorized as either PSE (pale, soft and exudative), RSE (Reddish-pink, soft and exudative), RFN (reddish-pink, firm and non-exudative) or DFD (dark, firm and dry). When discriminant analysis was used to sort carcasses into four quality groups the highest proportion of correct classes was 65% by HGP, 60% by MQM, 52% by NpH and 32% by SRP. When independent variables were combined to sort carcasses into groups the success was only 67%. When RSE and RFN groups were merged so that there were only three groups (PSE, RSE+RFN, DFD) differentiating by color MQM was able to sort the same set of data into the new set of three groups with 80% accuracy. The proportions of correct classifications for HGP, NpH and SRP were 75%, 61% and 35% respectively. There was a decline in predication accuracy when only two groups, exudative (PSE and RES) and non exudative (RFN and DFD) were sorted. However, when two groups designated PSE and non-PSE (RSE, RFN and DFD) were sorted then the proportion of correct classification by MQM, HGP, SRP and NpH were 87%, 81%, 71% and 66% respectively. Combinations of variables only increased the prediction accuracy by 1 or 2% over prediction by MQM alone. When the data was sorted into three marbling groups based on SM this was not well predicted by any of the probe measurements. The best prediction accuracy was 72% by a combination of MQM and NpH.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.4
• /
• pp.96-101
• /
• 2015

In the previous study, we investigated the physical properties of new organic fillers made from major agricultural byproducts, including rice husks, peanut husks and garlic stems, and we estimated that rice husk was the best candidate for use as new organic fillers in paperboard. In this study, an organic filler prototype was produced with rice husk and the mill trials were carried out in a white liner chipboard (duplexboard) mill. The rice husk organic filler was added to the middle ply of SC $350g/m^2$ to determine the optimal conditions for the manufacture of rice husk organic fillers. The mill trials were performed three times and the bulk improvement and drying energy reduction were measured to identify the functionality of the rice husk organic filler compared to that of the commercial wood powder. In the first mill trial, the test failed because the surface roughness of the duplexboard had deteriorated after the rice husk organic filler was added to the OCC stock. As all of the particles remaining on the 60 mesh sieves were removed and the particle size was decreased by increasing the length of the grinding process, the surface roughness of the duplexboard did not be deteriorated in the second mill trial. However, the bulk improvement and drying energy reduction were not observed. In the final mill trial, as the particle size of the rice husk organic filler was controlled by increasing the portion of particles passing through the 60 mesh sieves and remaining 100 mesh sieves, higher bulk improvement and drying energy reduction were acquired compared to the commercial wood powder.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.39 no.2
• /
• pp.104-115
• /
• 2002

Core is the main component of inductor. This core should be classified into around 10 classes according to the value of inductance and Q. The coil should be winded with the outer-boundary of this core by different number of turns. Theses kind of precise inductors would be required in the future environment which PCs and communication devices demand more high speed and lower voltage level. It would be quite unefficient that only one core is classified once a time. There, it will be developed so that 10 cores are classified simultaneously. For the operation of classifying 10 cores once in a time, suppose 10 test instruments could be used. In this case, it would take much cost since a test instrument Is expensive. So, by using only one test instrument, it is really more desirable that this system is developed. Each core classified by 10 different classes is to be stored into the corresponding box through the corresponding rubber hose. 10 cores are passed on a serial line and are placed on each testing slot. Here, each core located at each slot is tested, and then the bowl located on the top of a step motor is moved into the corresponding spot by rotating step motor with some angles. Each bowl connected with the corresponding box through rubber hose. Actually 100 hoses are connected, 10 step motors are rotated at 10 different angles, so the size is really so big, the shape of connecting 100 hoses is so complicated. Therefore it is anticipated that the system would be going to be easily out of ordered. In this paper the main purpose is to make several suggestions to be able to work well in these kinds of being affected by the abnormal operation of motors and the flow of cores.

• The Journal of Fisheries Business Administration
• /
• v.14 no.2
• /
• pp.15-68
• /
• 1983

From the economic point of view the fishing port is the complex of installations on land, organized to serve the fishing fleet and its cargo, and is the main link in the production chain of all components of the fishing industry, with the aim of achieving the planned targets with the minimum cost. Fishing port investment decisions have had significant impact on the development aims of Korean fisheries. Fishing port investments in Korea are made mostly by public or semipublic port authorities. Such investments should be judged not purely on the basis of financial profitability but rather on the extent to which they serve the development aims of the fishing industry. This makes the economic appraisal process more complex and presents certain problems in correctly quantifying the economic costs and benefits of the fishing port projects. This study concentrates more on the theoretical economic appraisal models than on the purely financial aspects of fishing port investments and points out the difference between the two approaches. In the result, there is clearly an element of judgment as to whether or not a shadow price needs to be used in estimating economic benefits and costs. From this viewpoint, some attempts are made to provide definitions of the possible economic benefits and costs, and methods for estimating and evaluating them in Part III and IV. Especially queueing theory is applied in the calculation of economic benefits. When a project is contemplated and analysis shows it to Lave a positive NPV, one question that arises is whether it should be implemented now or delayed. In this paper, the first year rate of return method is regarded as a more concise way of solving the timing of investment, At the end of Part IV, risk analysis of fishing port investments is considered. It can be handled in a number of ways, ranging from informal judgment to complex statistical analyses involving large-scale computer models, This paper recommends that evaluators of fishing port investments use the sensitivity analysis indicating exactly how much NPV will change in response to a given change in an input variable, other things held constant. Decisions regarding the amount of capacity to provide must be made in fishing port investments. Providing too much service would involve excessive capital costs. On the other hand, not providing enough service capacity would cause the waiting line of fishing vessels to become excessively long at times. Therefore, in Part V, the optimal number of berths and berth productivity in fishing port are defined as follows: Minimize E(TC) ＝ E(WC)＋E(SC) The minimum of this function is the solution and that is the optimal number of berth and berth productivity in fishing port.

• Water for future
• /
• v.15 no.3
• /
• pp.49-55
• /
• 1982

The purpose of this study is to examine the methods of estimation, comparing U.S. SCS method and $\Phi$-index with effective rainfall. And also comparision was made among SCS method, Chow method and Mockus method as to the peak discharge of design storm hydrograph by small river basin. Hydrological data of the Shin river basin which was used in this study and the results of study are as follow; 1) As a result of applying the SCS method to determine the effective rainfall out of total rainfall, it turned out that the everage CN of the basin as obtained by the analysis of hydrologic soil-cover complex was varied as follows; AMC-I was 27.9%, AMC-II 16.4%, AMC-III 8.1% less than the value given by SC method using discharge measurement. 2) The comparision of effective rainfall by the ungaged SCS method with that of gauged $\Phi$-index method showed that the $\Phi$-index method showed that the $\Phi$-index method gives large value by 4.7% to those given by hydrograph. The result of analysis by the SCS method resulted in great difference from discharge measurement. 3) The comparision of SCS method, Chow method, and Mockus method showed that dimensionless hydrograph of SCS method and Chow method were close to the peak discharge of the gauged unit hydrograph, while the other methods gave far different results. 4) Attempts were made, for a better adaptation to the Shin river basin, to introduce lag time formula constant of dimensionless hydrograph of the SCS method by using the peak discharge of the gauged flow hydrograph.