• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1999년도 제29회 춘계학술대회
• /
• pp.359-365
• /
• 1999

We have evaluated the performance and some physical properties of 25 automotive engine oils (21 domestic and 5 imported products) which are purchased on the market to verify the API(American Petroleum Institute) or ILSAC(International Lubricant Standardization and Approval Committee) certification marks attached on the products and to determine the necessity of the quality control of the engine oils on the market. 12 test items are chosen according to API engine oil specification, which are flash point, pour point, cold cranking simulator apparent viscosity, pumping viscosity, gelation index, HTHS(High Temperature High Shear viscosity), foam, high temperature foam, filterability, volatility, high temperature deposit(TEOST), phosphorus content. We have found one product which did not meet the API specification on gelation index, one on HTHS, four on foam, and one on volatility, which implies that the quality control system is in need to check the fidelity of the certification marks attached on the engine oils being marketed. In addition, this works raises the necessity of the upgrade of the present Korean engine oil specification.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2008년도 한국컴퓨터종합학술대회논문집 Vol.35 No.1 (D)
• /
• pp.491-494
• /
• 2008

기존의 전력량계의 원격 검침을 위한 DLMS/COSEM(Device Languag Message Specification / Companion Specification for Energy Meters) 시스템에서의 실제 송, 수신되는 데이터를 수집하여 이를 표현 및 분석 할 수 있는 프로그램을 구현하여 이로 하여금 실제 검침원에게 시스템에서의 송 수신되는 데이터의 흐름을 한 눈에 볼 수 있게 하였다. 또한 데이터의 실제 값 들을 분석하여 이틀을 가시적으로 볼 수 있어 오류 발생 시에 세부적으로 데이터를 분석하여 오류 원인을 찾아 낼 수 있다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.359-360
• /
• 2002

A methodology was developed for evaluation of oxidation stability of base stocks and engine oils. Analytical procedures for both classes of lubricants were based on the ASTM standards D 6186 and/or E 2009. The procedures were applied to a set of engine oils of the SAE 5W-30 specification, and to a set of several hydrocracked and solvent neutral base oils, both with and without addition of antioxidant. A potential of a pressure DSC for diagnostic purposed was also demonstrated by monitoring the engine oil ageing during its operation in heavy-duty engine.

• 자동차안전학회지
• /
• 제7권3호
• /
• pp.19-24
• /
• 2015

Brake pads are a component of disc brake system of automobile and consist of steel backing plates and friction material facing the disk brake rotor. Due to the repeated sliding forces and torque in vehicle braking, friction performance of brake pads are ensured. Futhermore, the brake pad is one of major tuning components in aftermarket, mechanical characteristics of the brake pad are necessary to evaluate for establishing the certification standards of tuning components. This study had performed the five specimen tests for friction coefficients and wear loss rates according to the SAE test specification. Using the instrumented indentation method, yield strength and tensile strength were measured. Friction coefficients, 0.386 - 0.489, and wear loss rates, 1.0% - 3.7% are obtained. The range of yield strength and tensile strength are 21.4 MPa - 105.3 MPa and 39.5 MPa - 176.4 MPa respectively.

• 한국항행학회논문지
• /
• 제22권3호
• /
• pp.179-188
• /
• 2018

항공전자 시스템의 개발할 때 항공 사고를 예방하기 위해서 SAE ARP4761 (민간 항공 시스템 및 장비 안전성 평가 프로세스 수행 방법 및 지침) 규격에 명시된 안전성 분석 및 평가를 수행한다. 안전성 분석은 시스템의 정상상태가 아닌 비정상상태에 대한 지식과 다른 규격들 간의 상호 연관성에 대한 지식이 요구된다. 때문에, 안전인증규격의 준수를 입증하는 자료를 자동으로 출력하는 도구가 필요하다. 본 연구는 규격의 안전성 분석 절차를 도식화하고, 안전 분석 CAD 도구들을 개별 절차에 적용하는 방법을 연구하였다. 예시 연구로서, ARP4761 부록의 여객기용 휠 제동 시스템 (WBS; wheel brake system)을 대상으로 ARP4761분석을 수행하였다.

• 대한전자공학회논문지SD
• /
• 제40권11호
• /
• pp.29-36
• /
• 2003

이 논문에서는, 2D-DCT, 양자화, AC/DC 예측블록, 스캔 변화, 역 양자화, 2D-IDCT로 이루어진 DCTQ 모듈의 효율적인 구조를 제안한다. 이 모듈은 1064 cycle 안에 매크로블록을 처리할 수 있도록 설계하였으며, MPEG-4 Video codec에서 30frame 의 CIF 영상에 대하여 동시에 encoder와 decoder를 처리할 수 있다. 단지 하나의 1D-DCT와 IDCT core 가 2-D DCT/IDCT 대신에 사용되며, 1 bit serial 분산산술방식을 이용하여 1-D DCT/IDCT를 구현하였다. 또한 파워소모를 줄이기 위해 움직임 예측에서 얻을 수 있는 SAE 값을 이용한 DCT와 양자화 모듈을 동작을 시키지 않는 방식을 제안하였다. 그리고 AC/DC 예측방법을 위한 메모리를 줄일 수 있도록 AC/DC 예측블록을 위한 메모리 구조 및 접근방법을 제안하였다. 그 결과, 하드웨어의 재 사용성이 놀아지고 파워소모가 작아짐을 알 수 있었다. 제안된 설계는 27㎒로 돌아가며, 실험결과 DCT와 IDCT 는 IEEE 기준을 만족함을 알 수 있었다.

• Animal cells and systems
• /
• 제4권1호
• /
• pp.95-100
• /
• 2000

The regional distribution and relative frequencies of endocrine cells were studied immunogistochemically (PAP methods) in the alimentary tract of the tree frog, Hyla areorea japonica, using specific antisera against serotonin, somatostatin, bovine Sp-1/chromogranin (BCG), cholecystokinin (CCK)-8, vasoactive intestinal polypeptide (VIP), gastrin, bombesin, secretin and pancreatic polypeptide (PP). Six kinds of endocrine cells were identified in this study, These immunoreactive cells were located in the gastric glands of stomach regions and in the basal portion of the epithelium of the intestinal tract or esophagus with variable frequencies. They were spherical or spindle-shaped. Serotonin-immunoreactive cells were observed in the whole alimentary tract including the esophagus. Somatostatin-immunoreactive cells were also detected throughout the alimentary tract except the rectum. CCK-8-immunoreactive cells were observed from the pylorus to ileum. Vip-immunoreactive cells were restricted to the rectum. Bombesin-immunoreactive cells were restricted to the fundic gastric regions and gastrin-immunoreactive cells were restricted to the pylorus. However, no BCG-, secretin and PP-immunoreactive cells were demonstrated in this study. In conclusion, the regional distribution and relative frequency of the endocrine cells in the alimentary tract of the tree frog were similar to other anuran species, but some differences which may be caused by feeding habits and species specification were also observed.

• 건축역사연구
• /
• 제30권3호
• /
• pp.33-44
• /
• 2021

San-ja is one of the main members consisting of the roof of traditional wooden buildings in Korea. In this study, the regional characteristics of the materials used in San-ja and changes of the materials over time were examined. To this end, 123 documents on the repair of wooden architectural heritage recorded since the 1950s were reviewed. It was found that there was a difference in the San-ja material by region because of the diversity in the conditions of material supply. For instance, bamboo was the most frequently used material in Jeollanam-do province because it was readily available. However, with the development of transportation and vehicle, the regional characteristics have disappeared. As a result, the material has been unified with bamboo now. This is because bamboo is specified as a representative material in the specification or the convenience of construction is prioritized. In addition, the social and economic conditions at the time of repair had an influence on the selection of the San-ja materials.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2017년도 춘계학술대회 논문집
• /
• pp.77-77
• /
• 2017

Titanium and its alloys offer attractive properties in a variety of applications. These are widely used for the field of biomedical implants because of its good biocompatibility and high corrosion resistance. Titanium anodizing is often used in the metal finishing of products, especially those can be used in the medical devices with dense oxide surface. Based on SAE/AMS (Society of Automotive Engineers/Aerospace Material Specification) 2488D, it has the specification for industrial titanium anodizing that have three different types of titanium anodization as following: Type I is used as a coating for elevated temperature forming; Type II is used as an anti-galling coating without additional lubrication or as a pre-treatment for improving adherence of film lubricants; Type III is used as a treatment to produce a spectrum of surface colours on titanium. In this study, we have focused on Type II anodization for the medical (dental and orthopedic) application, the anodized surface was modified with gray color under alkaline electrolyte. The surface characteristics were analyzed with Focused Ion Beam (FIB), Scanning Electron Microscopy (SEM), surface roughness, Vickers hardness, three point bending test, biocompatibility, and corrosion (potentiodynamic) test. The Ti-6Al-4V alloy was used for specimen, the anodizing procedure was conducted in alkaline solution (NaOH based, pH>13). Applied voltage was range between 20 V to 40 V until the ampere to be zero. As results, the surface characteristics of anodic oxide layer were analyzed with SEM, the dissecting layer was fabricated with FIB method prior to analyze surface. The surface roughness was measured by arithmetic mean deviation of the roughness profile (Ra). The Vickers hardness was obtained with Vickers hardness tester, indentation was repeated for 5 times on each sample, and the three point bending property was verified by yield load values. In order to determine the corrosion resistance for the corrosion rate, the potentiodynamic test was performed for each specimen. The biological safety assessment was analyzed by cytotoxic and pyrogen test. Through FIB feature of anodic surfaces, the thickness of oxide layer was 1.1 um. The surface roughness, Vickers hardness, bending yield, and corrosion resistance of the anodized specimen were shown higher value than those of non-treated specimen. Also we could verify that there was no significant issues from cytotoxicity and pyrogen test.

• 한국건설관리학회논문집
• /
• 제9권2호
• /
• pp.170-181
• /
• 2008

건설 프로젝트는 생산과정 이전에 설계도면을 바탕으로 예상되는 비용이 산정되며, 기획단계는 소요예산을 책정하고 설계단계는 예산에 합당한 효율적 대안을 찾으며, 정확한 입찰금액을 예측하기 위해 수차례 이루어진다. 특히, 물량산출 이전까지 예측되는 공사비의 정확도와 신뢰도는 매우 중요하다. 그러나, 국내의 경우 면적당 단가 방식 공사비 예측을 벗어나지 못할 뿐 아니라, 단계별 예측방법, 프로세스, 데이터 분석 및 관리기술 등이 표준화되어 체계적이고 종합적으로 관리되지 못하고 있다. 이에 국내 공사비 예측기술 및 관리기술 발전을 위하여 첫째, 표준화된 공사비 데이터베이스 구축과 국가차원의 종합적 관리가 필요하며, 구축 방법으로 다차원 공사비 데이터베이스 개념모델 CUBE를 제시하였다. 둘째 단계별 공사비 예측의 목적에 맞는 코스트 모델 적용이 필요하며, 코스트 모델의 방법론을 기획단계와 설계단계로 구분하여 제시하였다. 셋째, 이러한 두 가지 코스트 모델을 적용한 코스트 플래닝 프로세스를 제시하였고, 넷째, 공사비 예측 및 관리 전문인력 양성의 필요성을 제시하였다.