• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.125-126
• /
• 2007

Polycrystalline silicon thin-film-transistors (Poly-Si TFT's) with a amorphous-$Si_xGe_y$ seed layer have been fabricated to improve the performance of TFT. The dependence of crystal structure and electrical characteristics on the the Ge fractions in $Si_xGe_y$ seed layer were investigated. As a result, the increase of grain size and enhancement of electrical characteristics were obtained from the poly-Si TFT's with amorphous-SixGey seed layer.

• Transactions on Electrical and Electronic Materials
• /
• v.13 no.1
• /
• pp.27-30
• /
• 2012

This paper proposes a micro gas sensor for measuring $H_2S$ gas. This is based on a $SnO_2$-CuO multi-layer thin film. The sensor has a silicon diaphragm, micro heater, and sensing layers. The micro heater is embedded in the sensing layer in order to increase the temperature to an operating temperature. The $SnO_2$-CuO multi layer film is prepared by the alternating deposition method and thermal oxidation which uses an electron beam evaporator and a thermal furnace. To determine the effect of the number of layers, five sets of films are prepared, each with different number of layers. The sensitivities are measured by applying $H_2S$ gas. It has a concentration of 1 ppm at an operating temperature of $270^{\circ}C$. At the same total thickness, the sensitivity of the sensor with multi sensing layers was improved, compared to the sensor with one sensing layer. The sensitivity of the sensor with five layers to 1 ppm of $H_2S$ gas is approximately 68%. This is approximately 12% more than that of a sensor with one-layer.

• The KIPS Transactions:PartA
• /
• v.15A no.4
• /
• pp.199-210
• /
• 2008

A Clustering based wireless internet proxy server needs a layer-7 load balancer with URL hashing methods to reduce the total storage space for servers. Layer-4 load balancer located in front of server cluster is to distribute client requests to the servers with the same contents at transport layer, such as TCP or UDP, without looking at the content of the request. Layer-7 load balancer located in front of server cluster is to parse client requests in application layer and distribute them to servers based on different types of request contents. Layer 7 load balancer allows servers to have different contents in an exclusive way so that it can minimize the total storage space for servers and improve overall cluster performance. However, its scalability is limited due to the high overhead of parsing requests in application layer as different from layer-4 load balancer. In order to overcome its scalability limitation, in this paper, we propose a distributed layer-7 load balancer by replacing a single layer-7 load balancer in the conventional scheme by a single layer-4 load balancer located in front of server cluster and a set of layer-7 load balancers located at server cluster. In a clustering based wireless internet proxy server, we implemented the conventional scheme by using KTCPVS(Kernel TCP Virtual Server), a linux based layer-7 load balancer. Also, we implemented the proposed scheme by using IPVS(IP Virtual Server), a linux-based layer-4 load balancer, installing KTCPVS in each server, and making them work together. We performed experiments using 16 PCs. Experimental results show scalability and high performance of the proposed scheme, as the number of servers grows, compared to the conventional scheme.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.347.2-347.2
• /
• 2016

Recently, in order to improve the performance of the colloidal quantum dot solar cells (CQDSCs), various efforts such as the modification of the cell architecture and surface treatment for quantum dot (QD) passivation have been made. Especially, the incorporation of halides into the QD matrix was reported to improve the performances significantly via passivating QD trap states that lower the life-time of the minority-carrier. In this work, we fabricated a lead sulfide (PbS) QD bilayer treated with different ligands and utilized it as a photoactive layer of the CQDSCs. The bottom and top PbS layer was treated using metal iodide ($MI_x$ and butanedithiol (BuDT), respectively. All the depositions and ligand treatments were carried out in air using layer-by-layer spin-coating process. The fabrication of the active layers as well as the n-type zinc oxide (ZnO) layer was successfully carried out on the bendable indium-tin-oxide (ITO)-coated polyethylene terephthalate (PET) substrate, which implies that this technique can be applied to the fabrication of flexible and/or wearable solar cells. The power conversion efficiency (PCE) of the CQDSCs with the architecture of $PET/ITO/ZnO/PbS-MI_x/PbS-BuDT/MoO_x/Ag$ reached 4.2 %, which is significantly larger than that of the cells with single QD (PbS-BuDT) layer.

• 한국해양학회지
• /
• v.8 no.1
• /
• pp.22-32
• /
• 1973

Based on the plankton samples collected in the Korea Strait in 1972, a study was conducted on the vertical distribution of chaetognaths in relation to water masses in th Strait. The settling volume of total plankton collected in the Strait ranged from 0.3 to 5 cc/10㎥ and showed a distinctive variation in the vertical distribution between day and night. The large amount of volume was found in the upper layer at night and deeper layer during the day time collections. A total of 19 species and one forma of chaetognaths were identified from the present samples. In general, the number of species and individuals of chaetognaths were abundant in the upper layer. But in August they were distributed almost evenly from the surface to the bottom layer. Particularly several species of warm water chaetognaths, i. e., Sagitta enflata and S. regularis appeared abundantly in the deeper layer in summer. This indicates a sinking phenomenon of warm water from the surface to the bottom layer. As for the vertical distribution of S.elegans, a cold water species, in the Korean Strait, it is restricted only to the bottom layer except in the region of upwelling where they appear in the middle layer. This species is usually distributed in the depth of below 150m in the southern part of Japan Sea(Park, 1970), and it is usually distributed as far south as the Strait between Busan and Tsushima. In addtion, cold water species of copepods such as Pseudocalanus minutus and Metridialucens appear in the western side of Thushima. As indicated by the vertical and horizontal distribution of S. elegans in the Strait, the cold water flows as an undercurrent along the bottom from the southern part of the Japan Sea to the Korea Strait between Busan and Thushima in summer and fall, with a trend of uprising along the coast of Korea. S. decipiens has been found only in the depth of below 50m except in the coastal area where they appear in the upper layer. Therefore the vertical distribution of this species can be used for tracing the occurrence of upwelling and the movement of water from the middle layer.

• Journal of KIISE:Information Networking
• /
• v.30 no.3
• /
• pp.377-386
• /
• 2003

In this paper, we present an application layer protocol to support secure wireless Internet services, called Application Layer Security(ALS). The drawbacks of the two traditional approaches to secure wireless applications motivated the development of ALS. One is that in the conventional application-specific security protocol such as Secure HyperText Transfer Protocol(S-HTTP), security mechanism is included in the application itself. This gives a disadvantage that the security services are available only to that particular application. The other is that a separate protocol layer is inserted between the application and transport layers, as in the Secure Sockets Layer(SSL)/Transport Layer Security(TLS). In this case, all channel data are encrypted regardless of the specific application's requirements, resulting in much waste of network resources. To overcome these problems, ALS is proposed to be implemented on top of HTTP so that it is independent of the various transport layer protocols, and provides a common security interface with security applications so that it greatly improves the portability of security applications. In addition, since ALS takes advantages of well-known TLS mechanism, it eliminates the danger of malicious attack and provides applications with various security services such as authentication, confidentiality integrity and digital signature, and partial encryption. We conclude this paper with an example of applying ALS to the solution of end-to-end security in a present commercial wireless protocol stack, Wireless Application Protocol.

• 한국초전도학회:학술대회논문집
• /
• v.14
• /
• pp.47-47
• /
• 2004

• Journal of the Korean institute of surface engineering
• /
• v.31 no.5
• /
• pp.266-277
• /
• 1998

The effects of $H_2S$ gas ratio, temperature and time on the case depth, hardness, and sulfide and nitride formation on the surface of sulfnitrided SCM440 steel have been studied by micro-pulse plasma technique. The thickness of compound layer of sulfide and nitride increased with the increase of time, temperautre and $H_2S$ gas ratio. But surface hardness decreased with the increase of soft sulfide layer because the hard nitride layer formed beneath the sulfide. The thickness of sulfide layer was about 10$\mu\textrm{m}$ abpve 0.0088% of $H_2S$ gas. The highest surface hardness of the compound layer was Hv835 at $530^{\circ}C$, 1hr and 0.06% of $H_2S$ gas. X-ray diffraction indicated that the surface products were $Fe_{1_x}S$, $Fe_{2.5}N$ and $Fe_4N$. It was confirmed by EPMA that sulfide only existed in the surface.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.473-476
• /
• 2003

This paper shows necessity of encapsulation layer to maximite flexibility of brittle indium-tin-oxide (ITO) on polymer substrates. And, Young's modulus (E) of encapsulation layer have an significant effect on external bending stress and the coefficient of thermal expansion (CTE) of that have a significant effect on internal thermal stress. To compare magnitude of total mechanical stress including both bending stress and thermal stress, the mechanical stress of triple-layer structure (substrate / ITO / encapsulation layer or substrate / buffer layer / ITO) can be quantified and numerically analyzed through the farthest cracked island position. As a result, it should be noted that multi-layer structures with more elastic encapsulation material have small mechanical stress compared to that of buffer and encapsulation structure of large Young's modulus material when they were externally bent.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.9
• /
• pp.3043-3047
• /
• 2012

To investigate the scattering layer effect of a $TiO_2$ multilayer in dye-sensitized solar cells (DSSCs), we designed a new DSSC system, assembled with a CdS-$TiO_2$ scattering layer electrode. A high-magnification SEM image exhibited hollyhock-like particles with a width of 1.5-2.0 ${\mu}m$ that were aggregated into 10-nm clumps in a hexagonal petal shape. The efficiency was higher in the DSSC assembled with a CdS-$TiO_2$ scattering layer than in the DSSC assembled with $TiO_2$-only layers, due to the decreased resistance in electrochemical impedance spectroscopy (EIS). The short-circuit current density ($J_{sc}$) was increased by approximately 7.26% and the open-circuit voltage ($V_{oc}$) by 2.44% over the 1.0 wt % CdS-$TiO_2$ composite scattering layer and the incident photon-to-current conversion efficiency (IPCE) in the maximum peak was also enhanced by about 5.0%, compared to the DSSC assembled without the CdS-$TiO_2$scattering layer.