• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.12
• /
• pp.21-26
• /
• 2004

In this paper, a direct method is developed to extact RF equivalent circuit of a packaged BJT without optimization. First, parasitic components of plastic package are removed from measured S-parameters using open and short package patterns. Using package do-embedded S-parameters, a direct and simple method is proposed to extract bonding wire inductance and chip pad capacitance between package lead and chip pad. The small-signal model parameters of internal BJT are next determined by Z and Y-parameter formula derived from RF equivalent circuit. The modeled S-parameters of packaged BJT agree well with measured ones, verifying the accuracy of this new extraction method.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.18 no.2
• /
• pp.147-153
• /
• 2006

In this study, the run-up of water waves on slopes of s-berm breakwaters was investigated by performing a series of hydraulic experiments. The run-up height was analyzed in detail by using the effects of wave steepness and surf similarity parameter. In general, the run-up heights were decreased as the height and the width of berm were increased. However, the variation of run-up height was small for change of wave steepness and surf similarity parameter.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.744-747
• /
• 2005

This research studied 6-Axes Articulated Robot Manipulator's gain Tuning in consideration of dynamic. First of all, search fur proportional gain of velocity control loop by dynamic signal analyzer. Proportional gain of velocity control loop is connected to dynamic signal analyzer. Next Select free Proportional Gain value. And Select amplitude X of sinusoidal properly so that enough Velocity Feedback Signal may be paid as there is no group to utensil department. Next step, We can get Bode Diagram of Closed loop transfer function response examination in interested frequency. Integral calculus for gain of velocity loop is depended on integral calculus correction's number. We can obtain open loop transfer function by integrator. And we can know bode diagram's special quality from calculated open loop transfer function. With this, Velocity Control Loop's Parameter as inner loop is controlled. Next In moving, when vibration occurs, it controls notch filter. And finally, we have to control fred-forward filter parameter for elevation of control performance.

• Journal of the Korean Data and Information Science Society
• /
• v.19 no.3
• /
• pp.959-965
• /
• 2008

We shall propose several estimators for the scale parameter in a uniform distribution with the presence of a half-triangle outlier, and obtain mean squared errors(MSE's) for their proposed estimators. And we shall compare numerically efficiencies for proposed several estimators of the scale parameter in a uniform distribution with the presence of a half-triangle outlier in the small sample sizes.

• Agricultural and Biosystems Engineering
• /
• v.1 no.1
• /
• pp.7-15
• /
• 2000

Optimization was considered from three perspectives : minimum grain loss, minimum damaged grain loss, and minimum power consumption. Factors affecting combine performance were classified as control, adjustable, and environmental. Control and adjustable factors were optimized by the parameter design developed by Taguchi. Environmental factors were used as input for optimization. Optimum range for control and adjustable factors are presented. Parameter design was adequate to obtain the optimum levels of control factors and optimum range of adjustable factors.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2001.10b
• /
• pp.1597-1600
• /
• 2001

In-Service-Monitoring을 통하여 네트웍 계층에서 성능저하와 전달되어지는 QOS의 영향을 감시하여 Pro-Active 매니지먼트가 가능하다. 그 결과로서 SLA 보증을 위반하기 전에 성능저하를 조기 발견하여 행동을 취한 수 있게 한다. 본 논문에서는 사용자의 요구조건을 만족하기 위한 네트웍의 구성과 SLA 측정의 제약조건들을 고려하고 Policy Based Routing이 적용되는 네트웍에서 Technology-Specific Parameter인 IP Packet Loss Ratio, IP 패킷전송지연, 패킷지터, 가용도등의 SLA Parameter를 측정하였다.

• Bulletin of the Korean Mathematical Society
• /
• v.49 no.5
• /
• pp.1089-1099
• /
• 2012

We construct three kinds of complete embedded singly-periodic minimal surfaces in $\mathbb{H}^2{\times}\mathbb{R}$. The first one is a 1-parameter family of minimal surfaces which is asymptotic to a horizontal plane and a vertical plane; the second one is a 2-parameter family of minimal surfaces which has a fundamental piece of finite total curvature and is asymptotic to a finite number of vertical planes; the last one is a 2-parameter family of minimal surfaces which fill $\mathbb{H}^2{\times}\mathbb{R}$ by finite Scherk's towers.

• Journal of the Korean Data and Information Science Society
• /
• v.24 no.6
• /
• pp.1521-1529
• /
• 2013

In this paper, we develop noninformative priors for the generalized Pareto distribution when the scale parameter is of interest. We developed the rst order and the second order matching priors. We revealed that the second order matching prior does not exist. It turns out that the reference prior and Jeffrey's prior do not satisfy a first order matching criterion, and Jeffreys' prior, the reference prior and the matching prior are different. Some simulation study is performed and a real example is given.

• Journal of Korean Society for Quality Management
• /
• v.29 no.4
• /
• pp.82-91
• /
• 2001

Taguchi robust design is widely used to quality improve methods. Especially, interest of dynamic characteristics parameter design is getting grow. In this paper, we have a comparative analyzed three Signal-to-Noise Ratios which are used in American Supplier Institute(ASI), MINITAB and Taguchi series published by Japanese Standard Institute with numerical examples.

• Journal of the Korean Vacuum Society
• /
• v.20 no.5
• /
• pp.367-373
• /
• 2011

It is described that the proton beam induces micro defects and electronic deep levels in Cz single crystal silicon. Enhance signal-to-noise ratio, Coincidence Doppler Broadening Positron Annihilation Spectroscopy has been applied to study of characteristics of p type and n type silicon samples. In this investigation the numerical analysis of the Doppler spectra was employed to the determination of the shape parameter, S, defined as the ratio between the amount of counts in a central portion of the spectrum and the total counts of whole spectrum. The samples were exposed by 4.0 MeV proton beams ranging from 0 to ${\sim}10^{14}$ ptls. The S-parameter values were increased as increasing the irradiated proton beam, that indicated the defects generate more.