• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.4 no.1
• /
• pp.32-37
• /
• 1979

The corona noise level at the place 10m and the frequency 1MHz from the new 345KV transmission line is 72dB in the maximum rain-fall and 63dB due to the wet conductors. The synthesized corona noise level of all 3 phases dominantly depends on the phase which has maximum corona level among them. The measured characteristic of the variation with distance from the line coincided well with the theoretically calculated value in this paper. The corona noise level was the highest level in rainy weather or snow-fall. It takes a few hours, for the corona noise to be stable after a rain-fall or snow-fall. The measured value of the corona noise level corresponds quite well with the formula for the corona noise level revision. It was necessary to quantize S/N ratio into radio reception quality for the radio interference due to the transmission line. Some regulations for radio reception quality were defined through long term experiments and ratings by ITU, IEEE comittee, NHK in Japan and others. Fixing our own regulation about radio reception quality should be required.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.10
• /
• pp.2209-2216
• /
• 2011

In this paper, we design a 32-bit eFuse OTP memory for PMICs using MagnaChip's $0.18{\mu}m$ process. We solve a problem of an electrical shortage between an eFuse link and the VSS of a p-substrate in programming by placing an n-well under the eFuse link. Also, we propose a WL driver circuit which activates the RWL (read word-line) or WWL (write word-line) of a dual-port eFuse OTP memory cell selectively when a decoded WERP (WL enable for read or program) signal is inputted to the eFuse OTP memory directly. Furthermore, we reduce the layout area of the control circuit by removing a delay chain in the BL precharging circuit. We'can obtain an yield of 100% at a program voltage of 5.5V on 94 manufactured sample dies when measured with memory tester equipment.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.764-768
• /
• 2002

Characteristics of ohmic Co/Si/Co contacts to n-type 4H-SiC are investigated systematically. The ohmic contacts were formed by annealing Co/Si/Co sputtered sequentially. The annealings were performed at $800^{\circ}C$ using RTP in vacuum ambient and $Ar:H_2$(9:1) ambient, respectively. The specific contact resistivity$(\rho_c)$, sheet resistance$(R_s)$, contact resistance$(R_c)$, transfer length$(L_T)$ were calculated from resistance$(R_T)$ versus contact spacing(d) measurements obtained from TLM(transmission line method) structure. While the resulting measurement values of sample annealed at vacuum ambient were $\rho_c=1.0{\tiimes}10^{-5}{\Omega}cm^2$, $R_c=20{\Omega}$ and $L_T$ = 6.0 those of sample annealed at $Ar:H_2$(9:1) ambient were $\rho_c=4.0{\tiimes}10^{-6}{\Omega}cm^2$, $R_c=4.0{\Omega}$ and $L_T$ = 2.0. The physical properties of contacts were examined using XRD and AES. The results showed that cobalt silicide was formed on SiC and Co was migrated into SiC.

• Journal of Korean Vacuum Science & Technology
• /
• v.4 no.1
• /
• pp.1-5
• /
• 2000

The C 1s photoelectron energy loss spectra of tris (8-hydroxy-quinoline) aluminum (Alq$_3$) and N,N'-diphenyl-N,N'-bis (3-methyl phenyl)-1,1'-bi-phenyl-4,4'-diamine (TPD) thin films have been investigated. Two major loss structures, namely the plasmon dominated loss lines and shake-up satellites, have been observed. The shake-up spectrum of the C 1s photoelectron line is directly related to the $\pi$-$\pi$$\^$*/ energy gap of the molecule which plays an important role in organic electroluminescent materials. The molecular orbitals of Alq$_3$ and TPD and their major components, quinolime and benzene, have been calculated with the AMI semi-empirical method. The amount of the plasma-dominated loss of Alq$_3$ and TPD, which has to do with the delocalization of electrons through the molecule, was about 24 eV, alike in both cases. The main peak of the C 1s shake-up spectrum of Alq$_3$ and TPD, however, was 5.2 eV and 6.8 eV respectively. It was found that the main shake-up peak reflects more the local $\pi$\longrightarrow$\pi$$\^$*/ transition of quinoline and benzene component rather than the excitation of the whole molecule of Alq$_3$ and TPD. The C 1s shake-up spectra, however, revealed some correlation with the optical energy gap of the organic eletroluminescent materials.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.8 no.2
• /
• pp.189-194
• /
• 2004

Amylase isozyme based three multivoltine viz., N+p, Np, N+ $p^{cho}$ and two bivoltine-D6+p, D6p syngenic lines (Syn. L) were developed from germplasm (GP) stocks Nistari (N) and D6 respectively. haemolymph isozyme pattern at pH 7.0 and 8.5 depicted a total 11 number (Am $y_{1 to 6}$ at pH 7.0 and Am $y^{l to 5}$ at pH 8.5) of native proteins (NP) of various sizes are amylase isozyme expressers. Among eleven NPs, two NPs of 770 kDa (Am $y^{6}$ at pH 7.0) and 376 kDa (Am $y^3$ at pH 8.5) are $\alpha$-amylase expressers and remaining NPs of 370, 364, 350, 329 and 274 kDa at pH 7.0 and 206, 292, 416, 725 kDa at pH 8.5 are $\beta$-amylase expressers. Accordingly, digestive juice amylase isozyme pattern at aforesaid pH also depicted a total number of 10 NPs (Am $y^{1 to 5}$) at each pH 7.0 and 8.5 are amylase expressers of which NP of 387 kDa (Am $y^4$ at pH 7.0) and 780 kDa (Am $y^{5}$ at pH 8.5) are a-amylase expresser. Remaining NPs of 338,297 ＆ 216 kDa at pH 7.0 and 370, 341, 329 ＆302 kDa at pH 8.5 are $\beta$-amylase expresser. Recurrent backcross lines (RBL) viz., N+pRBL and NpRBL were developed through introgression of high shell weight character (a multigenic trait) to be used further for congenic line (Con. L) development and to understand any association with introgressed character. Isozyme pattern in haemolymph of RBLs depicted only one $\alpha$-amylase of 770 kDa at pH 7.0 and 376 kDa at pH 8.0 with three and four respective $\beta$-amylase bands but in bivoltine lines numbers of $\beta$-amylase bands vary between 1 to 2 at aforesaid pH. Variability was also observed in digestive juice of multivolitine and its RBLs but bivoltine lines express null activity at both pH except appearance of one very week $\alpha$-amylase band D6+p at pH 8.5. Overall study suggests that not a single NP at both pH is common for expression of any band of amylase isozyme i.e., a totally different set of proteins are the amylase isozyme expresser at specific pH and no molecular factor of amylase is associated in developed RBLs which showed improvement on survival, single cocoon shell weight (SCSW) and single filament length over receptor parents.s.s.s.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.1017-1020
• /
• 1998

We propose an algorithm which processes the floating-point $n_{addition}$traction and rounding in parallel. It also processes multiplication and rounding in the same way. The hardware model is presented that minimizes the delay time to get results for all the rounding modes defined in the IEEE Standards. An unified method to get the three bits(L, G, S)for the rounding is described. We also propose an unified guide line to determine the 1-bit shift for the post-normalization in the Floating-point $n_{addition}$traction and multiplication.

• Journal of applied mathematics & informatics
• /
• v.27 no.1_2
• /
• pp.105-121
• /
• 2009

In this paper we will be interested in characterizing and computing matrices $X\;{\in}\;C^{n{\times}n}$ that satisfy $e^X$ = A, that is logarithms of A. The study in this work goes through two lines. The first is concerned with a theoretical study of the solution set, S(A), of $e^X$ = A. Along the second line computational approaches are considered to compute the principal logarithm of A, LogA.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.1 no.4
• /
• pp.209-215
• /
• 2001

In this paper a method for analysis and modelling of coplanar transmission interconnect lines that are placed on top of silicon-silicon oxide substrates is presented. The potential function is expressed by series expansions in terms of solutions of the Laplace equation for each homogeneous region of layered structure. The expansion coefficients of different series are related to each other and to potentials applied to the conductors via boundary conditions. In the plane of conductors, boundary conditions are satisfied at $N_d$ discrete points with $N_d$ being equal to the number of terms in the series expansions. The resulting system of inhomogeneous linear equations is solved by matrix inversion. No iterations are required. A discussion of the calculated line admittance parameters as functions of width of conductors, thickness of the layers, and frequency is given. The interconnect capacitance and conductance per unit length results are given and compared with those obtained using full wave solutions, and good agreement have been obtained in all the cases treated

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.583-584
• /
• 2006

Printing technology has begun to get into the spotlight in many ways due to the low cost effectiveness to existent semi-conductor process. It also has very useful application areas, not only paper printing but also patterning for LCD color tilter, Photovoltaic patterning, RFID antenna, OLED, and so on. In this study, an apparatus of gravure offset printing was developed for fine line width printing. The pattern was composed of $20{\mu}m$ size of continuous lines of which pitch size was $40{\mu}m$. The printed pattern shows that it is possible to make around $20{\mu}m$ line-width printing pattern. The roll-to-roll printing system for fine line-width printing based on primary experiment is presented. For testing of multi-layer printing, the system was designed to be capable of printing two different materials from each printing unit using gravure-offset printing method and have a function of alignment of two printed materials.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.6 s.97
• /
• pp.594-602
• /
• 2005

In this paper, a new type of 5-pole low pass filter(LPF) having defected ground structure(DGS) and very wide transmission line elements is proposed. The previously presented design method of 3-stage LPF using DGS is generalized to design N-pole LPFs for $N\geq5$. As an example, a 5-pole LPF having DGS is designed and measured. The accurate curve-fitting method to determine the series inductors in the prototype filter, and ultimately the size of DGS is described. The proposed 5-pole LPF has transmission line elements with a very low impedance to realize the required shunt capacitance instead of open stubs. Therefore, open stub. Therefore, open stub, Tee-junction, Cross-junction, and high impedance line are not required for the proposed LPF, while they all have been essential in conventional LPFs.