• Korean Journal of Environmental Biology
• /
• v.32 no.3
• /
• pp.216-224
• /
• 2014

Decrease in dissolved oxygen concentrations associated with temperature fluctuation is an important criteria to evaluate the mortality rate of the species. Based on this parameter, we investigated the survival rate, physiological response and histological change of warty sea squirt. It was found that the survival rate of the warty sea squirt species was 63.3% at $23^{\circ}C$ and 56.6% at $26^{\circ}C$ respectively. However, exposure of six days at $29^{\circ}C$ caused deaths among species, which indicated the 6day-$LT^{50}$ of the tested species to be $24.58^{\circ}C$ ($19.48{\sim}35.48^{\circ}C$). Further, after 11 day of exposure, the dissolved oxygen concentration has been found to decrease, with the survival rate of 20% at $4.0mg\;L^{-1}$ and deaths at $2.0mg\;L^{-1}$, thus 11day-$LC^{50}$ calculated to be $3.88mg\;L^{-1}$ ($3.29{\sim}4.57mg\;L^{-1}$). In addition, decrease in rate of oxygen consumption and excretion of ammonia was also noted at this critical water temperature and dissolve doxygen concentration. Moreover, there has been common histopathological changes were observed in warty sea squirt's gill pouch, digestive tract, and tunic as follows such as: proliferation of epithelial cells, condensation and necrosis, permeation of phagocyte and blood cell, loss of cilium and muscular fiber degeneration. Based on our study results, we suggest that these parameters can also be useful to evaluate the survival rate and physiological response in other species.

• Journal of Hospice and Palliative Care
• /
• v.13 no.3
• /
• pp.169-180
• /
• 2010

Purpose: This study was to identify the death recognition, meaning in life, and death attitude of participants in the death education program. Methods: A survey was conducted, and 205 data were collected. Descriptive statistics, ${\chi}^2$-test, ANOVA, and Duncan test were used. Results: 1) The followings were the characteristics of death recognition shown by the participants. Over half of the participants said that they had given some thoughts on their deaths, that they had agreeable view on death acceptance, and that diseases and volunteer works made them think about their deaths. Moreover, suffering, parting with family and concerns for them, etc. were the most common reasons for the difficulty of accepting death. As for 'the person whom I discuss my death with', spouse, friend, and son/daughter were the most chosen in this order. Lastly, the funeral type that most of the participants desired was cremation. 2) The means of meaning in life and death attitude were $2.92{\pm}0.29$ and $2.47{\pm}0.25$, respectively. There were significant differences between health status, meaning in life and death attitude. 3) A significant positive corelationship was found between meaning in life and death attitude (r=0.190, P=0.001). Conclusion: For an effective death education program that would fit each individual's situation, an educational content that can make a person understand the meaning of his or her life and death, includes knowledge to lessen the fear and anxiety of death, and helps a person heal from the loss of a family member is absolutely necessary.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.5
• /
• pp.2142-2147
• /
• 2012

This study is aimed at decreasing wrong diagnosis with corrected EF(Ejection Fraction) of 2D echo cardiography by analysing the physical time-resolution difference between Cine MRI and 2D echo cardiography and applying the corrected EF in 2D echocardiography. From February 2010 to December 2011, among the 110 patients who had undergone both 2D echo cardiography and cine MRI only 37 patient were selected suffering aortic valve regurgitation. ED, ES and SV were measured and EF was calculated in each system while normal ranges of Cine MRI and 2D echocardiography were compared to evauate misdiagnosis rate. The correlation of physical time resolution between 2D echocardiography and MRI was evaluated and the differences were corrected with linear regression coefficient which is derived from linear regression analysis. Blandt-Altman plot was used to evaluate the reliability of corrected 2D echo cardiography EF and compare the error among measured values. The values were compared with MRI normal range and misdiagnosis rate was measured again. As a result, misdiagnosis rates of physical time resolution were measured to be 32.4%(12people) before the correction of EF and 18.9%(7people) after the correction. Also, EF confirmed in Blandt-Altman plot were almost the same with MRI EF. In conclusion, when diagnosing aortic regurgitation disease, simply using 2D echocardiography can easily raise the misdiagnosis rates, therefore considering the MRI machine's physical merits, correcting the time resolution difference is important by calculating time resolution wrong diagnosis would decrease and it is considered to be useful in clinical circumstances.

• Proceedings of the KACD Conference
• /
• 2008.05a
• /
• pp.177-183
• /
• 2008

It was reported that esthetic composite resin restoration reinforces the strength of remaining tooth structure with preserving the natural tooth structure. However, it is unknown how much the strength would be recovered. The purpose of this study was to compare the fracture resistance of three types of undermined cavity filled with composite resin with that of non-cavitated natural tooth. Forty sound upper molars were allocated randomly into four groups of 10 teeth. After flattening occlusal enamel. undermined cavities were prepared in thirty teeth to make three types of specimens with various thickness of occlusal structure (Group $1{\sim}3$). All the cavity have the 5 mm width mesio-distally and 7 mm depth bucco-lingually. Another natural 10 teeth (Group 4) were used as a control group. Teeth in group 1 have remaining occlusal structure about 1 mm thickness, which was composed of mainly enamel and small amount of dentin. In Group 2, remained thickness was about 1.5 mm, including 0.5 mm thickness dentin. In Group 3, thickness was about 2.0 mm, including 1 mm thickness dentin. Every effort was made to keep the remaining dentin thickness about 0.5 mm from the pulp space in cavitated groups. All the thickness was evaluated with radiographic Length Analyzer program. After acid etching with 37% phosphoric acid, one-bottle adhesive (Single $Bond^{TM}$, 3M/ESPE, USA) was applied following the manufacturer's recommendation and cavities were incrementally filled with hybrid composite resin (Filtek $Z-250^{TM}$, 3M/ESPE, USA). Teeth were stored in distilled water for one day at room temperature, after then, they were finished and polished with Sof-Lex system. All specimens were embedded in acrylic resin and static load was applied to the specimens with a 3 mm diameter stainless steel rod in an Universal testing machine and cross-head speed was 1 mm/min. Maximum load in case of fracture was recorded for each specimen. The data were statistically analyzed using one-way analysis of variance (ANOVA) and a Tukey test at the 95% confidence level. The results were as follows: 1. Fracture resistance of the undermined cavity filled with composite resin was about 75% of the natural tooth. 2. No significant difference on fracture loads of composite resin restoration was found among the three types of cavitated groups. Within the limits of this study, it can be concluded the fracture resistance of the undermined cavity filled with composite resin was lower than that of natural teeth, however remaining tooth structure may be supported and saved by the reinforcement with adhesive restoration, even of that portion consists of mainly enamel and a little dentin structure.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.04a
• /
• pp.5-9
• /
• 2004

In this paper, we studied the OCT(Optical Coherence Tomography) system which it has been extensively studied because of having some advantages such as high resolution cross-sectional images, low cost, and small size configuration. A basic principle of OCT system is Michelson interferometer. The characteristics of light source determine the resolution and the transmission depth. As a results, the light source have a commercial SLD with a central wavelength of 1,285 nm and FWHM(Full Width at Half Maximum) of 35.3 nm. The optical delay line part is necessary to equal of the optical path length with scattered light or reflected light from sample. In order to equal the optical path length, the stage which is attached to reference mirror is moved linearly by step motor And the interferometer is configured with the Michelson interferometer using single mod fiber, the scanner can be focused of the sample by using the reference arm. Also, the 2-dimensional cross-sectional images were measured with scanning the transverse direction of the sample by using step motor. After detecting the internal signal of lateral direction at a paint of sample, scanner is moved to obtain the cross-sectional image of 2-demensional by using step motor. Photodiode has been used which has high detection sensitivity, excellent noise characteristic, and dynamic range from 800 nm to 1,700 nm. It is detected mixed small signal between noise and interference signal with high frequency After filtering and amplifying this signal, only envelope curve of interference signal is detected. And then, cross-sectional image is shown through converting this signal into digitalized signal using A／D converter. The resolution of the OCT system is about 30$\mu\textrm{m}$ which corresponds to the theoretical resolution. Also, the cross-sectional image of ping-pong ball is measured. The OCT system is configured with Michelson interferometer which has a low contrast because of reducing the power of feedback interference light. Such a problem is overcomed by using the improved inteferometer. Also, in order to obtain the cross-sectional image within a short time, it is necessary to reduce the measurement time for improving the optical delay line.

• Economic and Environmental Geology
• /
• v.25 no.3
• /
• pp.259-273
• /
• 1992

The Seongsan mine is one of the largest dickite deposits in the southwestern part of the Korean Peninsula. The main constithent minerals of the ore are dickite and quartz with accessory alunite, kaolinite and sericite. The geology around the Seongsan mine consists mainly of the late Cretaceous felsic volcanic rocks. In the studied area, these rocks make a synclinal structure with an axis of E-W direction plunging to the east. Most of the felsic volcanic rocks have undergone extensive hydrothermal alteration. The hydrothermally altered rocks can be classified into the following zones: Dickite, Dickite-Quartz, Quartz, Sericite, Albite and Chlorite zones, from the center to the margin of the alteration mass. Such zonal arrangement of altered rocks suggests that the country rocks, most of which are upper part of the rhyolite and welded tuff, were altered by strongly acid hydrothermal solutions. It is reasonable to consider that initial gas and solution containing $H_2S$ and other compounds were oxidized near the surface, and formed hydrothermal sulfuric acid solutions. The mineralogical and chemical changes of the altered rocks were investigated using various methods, and chemical composition of fifty-six samples of the altered rocks were obtained by wet chemical analysis and X.R.F. methods. On the basis of these analyses, it was found that some components such as $SiO_2$, $Al_2O_3$, $Fe_2O_3$, CaO, MgO, $K_2O$, $Na_2O$ and $TiO_2$ were mobilized considerably from the original rocks. The formation temperature of the deposits was estimated as higher than $200^{\circ}C$ from fluid inclusion study of samples taken from the Quartz zone. On the basis of the chemical composition data on rocks and minerals and estimated temperatures, the hydrothermal solutions responsible for the formation of the Seongsan dickite deposits were estimated to have the composition: $m_{K^+}=0.003$, $m_{Na^+}=0.097$, $m_{SiO_2(aq.)}=0.008$ and pH=5.0, here "m" represents the molality (mole/kg $H_2O$).

• Korean Journal of Animal Reproduction
• /
• v.25 no.4
• /
• pp.317-325
• /
• 2001

This study investigated the effect of ferrous sulfate (Fe$^{2+}$) and/or ascorbic acid (Asc) on fertilizing ability in vitro of frozen-thawed boar spermatozoa. Using chlortetracycline (CTC) fluorescence, the spermatozoa was treated in preincubation medium with control, Fe$^{2+}$(1 mM), Asc (0.5 mM) and Fe$^{2+}$Asc to assessed for acrosome reaction, and the oocyte penetration test to determine whether the Fe$^{2+}$ and/or Asc can promote the penetration ability in vitro. When frozen-thawed spermatozoa was washed with preincubation medium, there were significantly (P ＜ 0.05) more acrosome-reacted in medium with Fe$^{2+}$Asc (38%) than control (27%). The penetration rates were also significantly (P ＜ 0.05) higher in medium with Fe$^{2+}$Asc (76%) than control (55%). Next, the lipid peroxidation of sperm was evaluated on the basis of malondialdehyde production following same treatments. The addition of Fe$^{2+}$Asc to sperm suspension increases the formation of malondialdehyde. However, there were not significantly different under the all conditions. The sperm suspension were also treated with control, Fe$^{2+}$, Asc and Fe$^{2+}$/Asc and assayed for sulfhydry1(-SH) group content. In the Fe$^{2+}$/Asc group, sperm-SH group were higher than another groups. In spermatozoa treated with Fe$^{2+}$ and/or Asc, however, no changes in sperm -SH-groups were detected when compared to controls. In another experiment, the activity of sperm binding to zona pellucida was evaluated through binding to salt-stored porcine oocytes. In control and Asc treatment groups, sperm binding to zona pellucida were significantly (P ＜ 0.05) higher than in medium with Fe$^{2+}$. On the other hand, there is not a significant increase in binding to zona pellucida with spermatozoa treated by Fe$^{2+}$/Asc. In summary, the present study suggests that Fe$^{2+}$/Asc causes an enhancement in fertilizing ability that is associated with penetration rate increased without change of spermatozoa binding capacity to homologous zona pellucida.o homologous zona pellucida.

• Journal of Animal Science and Technology
• /
• v.48 no.5
• /
• pp.637-650
• /
• 2006

Genomic DNA isolated from two crucian carp species obtained from Yesan (Carassius auratus) and Dangjin (Carassius cuvieri) in Korea were amplified at several times by polymerase chain reaction (PCR). The amplified products were separated by agarose gel electrophoresis (AGE) with oligonucleotides decamer primer and stained with ethidium bromide. The seven arbitrarily selected primers OPC-11, OPC-14, OPC-18, OPD- 02, OPD-11, OPD-15 and OPD-20 generated the shared loci by each species, the polymorphic and specific loci. The seven primers generated the total 458 loci that can be scored from the crucian carp obtained in C. auratus species. 358 fragments were generated from the species obtained in C. cuvieri species. The size of DNA fragments varies from 150 to 1,600bp. The complexity of the banding patterns varies dramatically between the primers and two locations. In this study, 458 loci were identified in the crucian carp species from Yesan and 358 in the crucian carp species from Dangjin: 84 polymorphic loci (18.3%) in the C. auratus species and 48 (13.4%) in the C. cuvieri species. 154 shared loci by each species, the average 22 per primer, were observed in the C. auratus species and 187 loci, the average 26.7 per primer, in the Dangjin species. Based on the average bandsharing (BS) values of all samples, the similarity matrix ranged from 0.434 to 0.868 in the C. auratus species and from 0.449 to 0.924 in the C. cuvieri species. The average BS value was 0.641±0.013 within the C. auratus species and 0.684±0.013 within the C. cuvieri species. The average BS value between two crucian carp species 0.484 ± 0.007, ranged from 0.307 to 0.682. The BS value between the individual No. 09 and No. 16 was 0.682, which was the highest between two crucian carp species. Compared separately, the BS value of individuals within the C. cuvieri species was higher than the C. auratus species. The dendrogram obtained by the seven primers, indicates three genetic clusters: cluster 1 (AURATUS No. 01, 02, 03, 04, 05, 06, 07, 08, 09, 10 and 11), cluster 2 (CUVIERI No. 12, 13, 14, 15, 16, 17, 18, 19, 20 and 21) and cluster 3 (CUVIERI no. 22). The shortest genetic distance displaying significant molecular difference was between the individual AURATUS No. 09 and AURATUS No. 08 from Yesan (genetic distance=0.064). The longest genetic distance displaying significant molecular differences was between the individual CUVIERI No. 17 and AURATUS No. 11 between two crucian carp species (0.477). RAPD-PCR analysis has revealed the significant genetic distance between two crucian carp species pairs.(Key words: Carassius auratus, Carassius cuvieri, Crucian Carp, DNA Polymorphism, Genetic Distance)

• Journal of Animal Science and Technology
• /
• v.53 no.4
• /
• pp.325-332
• /
• 2011

This research was conducted to analyze the effects of raising farm on the heritability and breeding values of Hanwoo cows for their carcass traits, including cold carcass weight (CWT), back-fat thickness (BFT), eye-muscle area (EMA) and marbling score (MAR). The carcass data and pedigree data were collected from steers raised on Hanwoo farms in Pyeongchang-gun, Gangwon-do, South Korea. Three analytical models were applied for the estimation of heritabilities and breeding values. The first model (model 1) included slaughter house-year-month combination as fixed effects and age at slaughter was fitted as linear and quadratic covariates. The second model (model 2) was similar to model 1, but raising farm was additionally included as random effect. The third model (model 3) was similar to model 1 but farm effects were additionally included as fixed effect. The comparisons between the model 1 and the models including farm effect (model 2 and model 3) revealed that heritability estimates from model 2 or model 3 were smaller to those from model 1 for all carcass traits. Especially, obvious decrease of heritability was observed in CWT where heritability was 0.23 from model 1, 0.15 from model 2 and 0.18 from model 3. The maximum log likelihood of the model 2 and 3 were higher than those of model 1 for all traits. In model 2 that raising farm was included as a random effect, the ratio of farm variance to the total phenotypic variance were ranged from 4% (EMA) to 18% (CWT). Top 10% and bottom 10% of female cows were selected based on the breeding values from model 1, and the Spearman's rank correlation coefficients among models were estimated for each trait within selected group. The correlation coefficients were ranged from 0.57 to 0.95 in top 10% group and from 0.68 to 0.95 in bottom 10% group. These results show that the discrepancies in the rankings of breeding values can be based on the models applied. In conclusion, the results obtained in this study suggest that the herd effect or farm effect should be included in the analytical model when breeding values are estimated with the purpose of improvement of carcass traits of Hanwoo breeding cows.

• Journal of Elementary Mathematics Education in Korea
• /
• v.19 no.4
• /
• pp.501-525
• /
• 2015

This study analyzes arithmetic word problem of multiplication and division in the mathematics textbooks and workbooks of 3rd grade in elementary school according to 2009 revised curriculum. And we analyzes type of the problem solving ability which 4th graders prefer in the course of arithmetic word problem solving and the problem solving ability as per the type in order to seek efficient teaching methods on arithmetic word problem solving of students. First, in the mathematics textbook and workbook of 3rd grade, arithmetic word problem of multiplication and division suggested various things such as thought opening, activities, finish, and let's check. As per the semantic element, multiplication was classified into 5 types of cumulated addition of same number, rate, comparison, arrayal and combination while division was classified into 2 types of division into equal parts and division by equal part. According to result of analysis, the type of cumulated addition of same number was the most one for multiplication while 2 types of division into equal parts and division by equal part were evenly spread in division. Second, according to 1st test result of arithmetic word problem solving ability in the element of arithmetic operation meaning, 4th grade showed type of cumulated addition of same number as the highest correct answer ratio for multiplication. As for division, 4th grade showed 90% correct answer ratio in 4 questionnaires out of 5 questionnaires. And 2nd test showed arithmetic word problem solving ability in the element of arithmetic operation construction, as for multiplication and division, correct answer ratio was higher in the case that 4th grade students did not know the result than the case they did not know changed amount or initial amount. This was because the case of asking the result was suggested in the mathematics textbook and workbook and therefore, it was difficult for students to understand such questions as changed amount or initial amount which they did not see frequently. Therefore, it is required for students to experience more varied types of problems so that they can more easily recognize problems seen from a textbook and then, improve their understanding of problems and problem solving ability.