• Journal of Ocean Engineering and Technology
• /
• v.37 no.3
• /
• pp.99-110
• /
• 2023

When a fire accident accompanied by an explosion occurs, the surrounding firewalls are affected by impact and thermal loads. Damaged firewalls due to accidental loads may not fully perform their essential function. Therefore, this paper proposes an advanced methodology for evaluating the fire resistance performance of firewalls damaged by explosions. The fragments were assumed to be scattered, and fire occurred as a vehicle exploded in a large compartment of a roll-on/roll-off (RO-RO) vessel. The impact velocity of the fragments was calculated based on the TNT equivalent mass corresponding to the explosion pressure. Damage and thermal-structural response analyses of the firewall were performed using Ansys LS-DYNA code. The fire resistance reduction was analyzed in terms of the temperature difference between fire-exposed and unexposed surfaces, temperature increase rate, and reference temperature arrival time. The degree of damage and the fire resistance performance of the firewalls varied significantly depending on impact loads. When naval ships and RO-RO vessels that carry various explosive substances are designed, it is reasonable to predict that the fire resistance performance will be degraded according to the explosion characteristics of the cargo.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.2
• /
• pp.263-268
• /
• 2003

In this paper, we have investigated double gate (DG) MOSFET structure, which has main gate (NG) and two side gates (SG). We know that optimum side gate voltage for each side gate length is about 3V in the main gate 50nm. Also, we know that optimum side gate length for each for main gate length is about 70nm. DG MOSFET shows a small threshold voltage roll-off. From the I-V characteristics, we obtained IDsat=550$mutextrm{A}$/${\mu}{\textrm}{m}$ at VMG=VDS=1.5V and VSG=3.0V for DG MOSFET with the main gate length of 50nm and the side gate length of 70nm. The subthreshold slope is 86.2㎷/decade, transconductance is 114$mutextrm{A}$/${\mu}{\textrm}{m}$ and DIBL (Drain Induced Barrier Lowering) is 43.37㎷. Then, we have investigated the advantage of this structure for the application to multi-input NAND gate logic. Then, we have obtained very high cut-off frequency of 41.4GHz in the DG MOSFET.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.5
• /
• pp.31-36
• /
• 2011

In this paper, Mel-Frequency Cepstral Coefficient (MFCC), Decorrelated Filter Bank (DFB), Octave-based Spectral Contrast (OSC), Zero-Crossing Rate (ZCR), and Spectral Contract/Roll-Off are combined as a set of multiple feature-vectors for the music genre classification system based on the Support Vector Machine (SVM) classifier. In the conventional system, feature vectors for the entire genre classes are normalized for the SVM model training and classification. However, in this paper, selected feature vectors that are compared based on the One-Against-One (OAO) SVM classifier are only used for normalization. Using OSC as a single feature-vector and the multiple feature-vectors, we obtain the genre classification rates of 60.8% and 77.4%, respectively, with the conventional normalization method. Using the proposed normalization method, we obtain the increased classification rates by 8.2% and 3.3% for OSC and the multiple feature-vectors, respectively.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.9
• /
• pp.2894-2900
• /
• 1996

The stream generator tubes represent an integral part of a major barrier against the fission product release to the environment. So, the rupture of these tubes could permit flow of reactor coolant into the secondary system and injure the safety of reactor coolant system. Therefore, if the crack was detected during In-Service Inspection of tubes the cracked tube should be evaluated by the pulgging criteria and plugged or not. In this study, the fracture mechanics evaluation is carried out on the thru-wall axial crack due to Primary Water Stress Corrosion Cracking in the roll transition aone of steam generator tube to help the assurence the integrity of tubes and estabilish the plugging criteria. Due to the Inconel which is used as tube material is more ductile than others, the plastic instability repture theory was used to calculate the critical and allowable crack length. Based on Leak Before Break concept the leak rate for the critical crack length and the allowable leak rate are compared and the safety of tubes was given.

• The Journal of the Korea Contents Association
• /
• v.19 no.9
• /
• pp.135-143
• /
• 2019

Purpose of this study is enhancing usability of online video platform by analyze link-depth and advertisement frequency. In this study, researcher checked market share of video platform which publishing web-drama, and compare their link-depth and advertisement frequency. As a result, access to the latest content has two to three link-depth. So it does not worsen usability. but, if contents doesn't show on main page or search result, it requires more than five to six steps. Image advertisement show up more than twice on every platform. 'Youtube' and 'Naver TV' show up pre-roll video advertisement in video player before offering contents. In this video platform information structure, directory searching needs high link-depth level and advertisement frequency. It will increase user's bounce rate and decrease return visit rate. So researcher suggests prototype using drop-down menu to reduce link-depth and enhance information structure.

• Journal of Navigation and Port Research
• /
• v.44 no.3
• /
• pp.145-150
• /
• 2020

The ship motion of large LNG ships affects ships' safety. The purpose of this study was to estimate the transfer function of roll motion among the hull motion of 153,000 m3 class LNG vessels. The ship motion transfer function was modeled using a Linear Time-Invarient system with single input, single output, and transfer function. The transfer function of the ship motion was estimated by the system identification method using single ocean wave as input of the model, and using the roll motion of the LNG ship obtained through ANSYS as the output of the model. The usefulness of the experimental results was evaluated using the precision and estimation rate of the model for cases wherein the different transfer function dimensions. Results of the experiment showed a precision at 99% and 98%, with estimation rate at 78% and 50%. From these results, we found the proposed method of estimating the transfer function of ship motion in this study reasonable. In the future, data of ship motion in actual sea conditions will be acquired and it will be applied to make the construction of models with multiple inputs and multiple outputs for practical use.

• Bulletin of the Korean Space Science Society
• /
• 2003.10a
• /
• pp.104-104
• /
• 2003

본 포스터에서는 다목적 위성 2호의 주 탑재체인 MSC(Multi-Spectral Camera)가 TDI(Time Delayed Integration) 방식을 채택함에 따라, TDI에 의해 MSC 영상 자료가 어떻게 영향을 받게 되는 지를 연구한 내용을 설명한다. MSC는 지상 해상도가 1m인 고해상도에서 영상을 촬영하기 때문에 상대적으로 입사 광량이 부족한 문제를 안고 있음에 따라 32 line의 TDI 방식을 사용한다. TDI 방식을 사용하여 MSC에서 직하방향으로 영상을 촬영할 경우, 영상의 가운데 pixel에서 멀어질수록 TDI에 의해 영상의 MTF 값이 떨어지는 결과가 발생한다. 또한, 다목적 위성 2호는 Roll 축을 중심으로 $\pm$30도 Pitch 축을 중심으로 $\pm$30도 tilt를 하여 영상을 촬영하도록 운영될 예정이기 때문에 더더욱 TDI에 의채 영상의 MTF 값이 떨어지는 결과가 발생하게 된다. 이외에도 TDI는 다목적 위성 2호의 고도가 감소하거나, Yaw 축의 변화, Jitter 등에 의해서도 영상의 MTF 값이 감소하게 된다. 물론 MSC CCD pixel의 sampling rate인 Line Rate 값을 각각의 경우에 따라 적절한 값을 부여함으로써 TDI에 의한 MTF 값의 감소를 많은 부분은 수습할 수 있으나 완벽한 보정은 힘든 상황이다.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.08a
• /
• pp.349-358
• /
• 2004

The strip temperature history of finishing mill process is one of the most important factors to stabilize the facilities and to achieve the better product quality including a better prediction of roll force etc. The ultimate goal of this study is to improve scientific understanding of the finishing mill process in the view of heat transfer science. Finishing mill cooling facilities of KwangYang $\#3$ hot rolling are introduced and heat transfer analyses from FET to FDT are particularly focused in this study Three major tasks are successfully achieved as follows: 1) The temperature Prediction Models are developed. 2) The average absolute error is found to be less then 10 Celsius degree (about $8.5^{\circ}C$). 3) Prediction rate (less then $\bar{+}20$) are $10.2\%$ improved $(80.1\;\rightarrow\;90.3\%)$.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.212-212
• /
• 2000

This study was performed to construct a hot strip speed measuring system and check over whether the measured speed can be used for improving the mass flow of the head-end part of a hot strip in the 7-stand finishing mill. Because the mass flow in hot rolling mill affects the looper operation and the thickness and width control of a strip, accurate measurement of strip speed ie important. The measured speed was compared with the roll speeds of No. 6 and No.7 stand to check the performance of the system and analyzed to find how to apply the speed. As a result, it is shown that the accuracy of the system is enough, strip thickness error can be reduced by -275∼+200$\mu\textrm{m}$ using the measured speed and the existing FSU model has low accuracy for predicting forward slip rate. A neural network was developed to calculate forward slip rate instead of FSU model. The test result of the neural network shows that the neural network is more accurate than the FSU model.

• Journal of Korea Society of Industrial Information Systems
• /
• v.14 no.4
• /
• pp.116-127
• /
• 2009

This research aims to improve the efficiency of production by selecting production configuration with high yield rate and lower error rate based on production history of steel pipe. To achieve this, we identify the properties of various types of MTO(make-to-order) steel pipe products and determine properties affecting yield rate and error rate using decision tree technique. From experimental results, we find out that specification is critical to determine yield rate and error rate of ERW steel pipes with mostly small and medium caliber, and an external diameter range in case of roll benders or spiral steel pipes with mostly large caliber. This research classified and embodied the patterns of yield rate and error rate mathematically by product properties.