• 한국기계가공학회지
• /
• 제21권2호
• /
• pp.39-45
• /
• 2022

In this study, we investigated whether the interference occurring in forming roll surfaces could be eliminated by increasing the radius of the variable section forming rolls. The surfaces of the rolls capable of forming products with different flange heights and bend angles with the bend line tilted at an angle of 1° from the longitudinal axis were created using the general CAD software CATIA. Roll interferences were determined for the change in the forming roll radius. The minimum gaps between the upper and lower roll surfaces were measured for the change in the forming roll radius, and the roll interferences were calculated from the difference between the measured value and the thickness of the product. It was observed that the thickness of the product had a slight effect on the roll interference when the thickness was between 0.8 and 1.2 mm. It was also observed that the roll interference could be eliminated by increasing the roll radius.

• 한국통신학회논문지
• /
• 제21권11호
• /
• pp.2942-2953
• /
• 1996

This paper studies the effect of intersymbol interference due to sampling-time jitter on the worst-case bit error probability in a digital modultation over an additive white Gaussian noise channel, with the squared-root raised-cosine filters in the transmitter and the receiver. It derives approximation formulas using the Taylor series approximations. the principal results of this paper is the relationship between the worst-casse bit error probability, the degree of jitter, the roll factor of the raised cosine filter, and other quantities. Numerical results show, as expected, that the intersymbol interference decreases as the roll-off factor increases and the jitter decreases. They also show that the approximation formulas are accurate for smally intersymbol interference, i.e., for large roll-noise ratio $E_{b/}$ $N_{0}$.leq.7 dB and begin to lose accuracy for larger signal-to-noise ratio.o.o.

• The Journal of the Acoustical Society of Korea
• /
• 제16권2E호
• /
• pp.47-54
• /
• 1997

This paper presents two results on intersymbol interferences in baseband digital communication over an additive white Gaussian noise channel-the interferences due to mismatched square-root raised-cosine filters, in which the filters have different roll-off factors, and / or due to sampling-time jitter. The result for the mismatched filters is that even the jitter-free sampling causes intersymbol interference and it is negligibly small for a wide range of signal-to-noise ratio up to 10dB, for the roll-off factor ranging from 0.2 to 0.5, the mismatch loss being within 0.1dB from the optimum at around 10-6 .For jitter interference an approximation formula for the bit error probability is derived in case of the matched filters, which shows how the roll-off factors and the amount of jitter affect the system performance. The formula is reasonably accurate.

• 한국인쇄학회지
• /
• 제29권3호
• /
• pp.17-30
• /
• 2011

The polarizer is an important optical element used in a variety of applications. Nano-wire grid polarizers in the form of sub-wavelength metallic gratings are an attractive alternative to conventional polarizers, because they provide high extinction ratio. This study has been carried out to fabrication of the 17inch area size nano-wire grid polarizer(NWGP) The master for NWGPs with a pitch of 200nm and the area size $730mm{\times}450mm$ were fabricated using laser interference lithography and aluminum sputtering and wet etching. And The NWGP fabrication process was using by the Roll to-Roll UV imprinting and was applied to flexible PET film. The results were a transmission of light (Tp) 46.7%, reflectance (Rs) 40.1% and Extinction ratio of above 16 for the visible light range.

• 동력기계공학회지
• /
• 제17권3호
• /
• pp.65-71
• /
• 2013

The under rail slide is the latest device to make accurate rectilinear reciprocating motion. In these day, 3-point type is used mostly for the products requiring high strength and performance such as refrigerator door guide or furniture drawer guide. However, It is all imported from foreign countries due to lack of the roll forming technique to make 3-point type under rail slide in domestic. Therefore, design and manufacturing technology for the 3-point type under rail slide are need to development through systematic study. In this paper, to make center member of 3-point ball-type under rail slide for the refrigerator doors, the roll forming modeling and simulation are performed using Shape-RF software. Tensile test is performed about SCP-1 1/2H for determine the mechanical properties of materials. Interference between the roll and the final shape are predicted from the results of the simulation ; this result show that the desirable performance and usefulness of the designed roll forming process.

• 한국통신학회논문지
• /
• 제28권7C호
• /
• pp.678-687
• /
• 2003

전력 및 대역폭 제한적인 디지털 통신 시스템을 위한 새로운 변복조 기술인 8SQAM(8-state Superposed Quadrature Amplitude Modulation)은 인접하는 두 심볼간에 진폭과 위상이 상관관계를 유지함으로써 부드럽고 연속적인 위상천이와 함께 적은 포락선 변동을 갖는 출력신호를 생성한다. 또한 8SQAM신호는 심볼간 간섭이 없으며 compact한 스펙트럼 특성을 갖는다. 따라서 8SQAM은 기존의 8PSK와 비교하여 비선형 왜곡에 의한 혼변조(IM)와 인접 심볼 간섭(ISI) 그리고 다중채널(SCPC-FDMA) 환경에서의 인접 채널 간섭(ACI) 영향을 적게 받는다. 본 논문에서는 비선형 증폭 다중채널 간섭 환경에서 8SQAM 시스템의 수신 성능을 전산모의 실험을 통해서 분석하였다. 전산모의 실험 결과 8SQAM은 고출력증폭기(HPA)의 Input back-off(IBO)가 1dB이고 채널 간격이 데이터 비트 율의 41.7%(즉, 스펙트럼 효율 =2.40b/s/Hz)일 때, BER=1$\times$$10^{-4}$ 을 유지하기 위해 요구되는 CNR이 $\alpha$= 0.3의 roll-off 값을 갖는 8PSK 보다 2.7dB 우수한 성능을 보였다.

• 한국산학기술학회논문지
• /
• 제22권2호
• /
• pp.134-138
• /
• 2021

스마트폰 등에서 사용되는 고성능 디스플레이에는 다양한 종류의 정밀한 플라스틱 박막 필름(Plastic Thin Film)이 사용되고 있다. 롤투롤(Roll-To-Roll) 공정으로 제조되는 플라스틱 박막 필름은 생산 공정 중에 실시간으로 필름의 두께가 계측되고, 정확하게 관리되어야 한다. 필름 제조 과정에서 필름에 장력이 작용하면서 주름이 발생되고, 이러한 주름 발생은 필름의 두께 방향과 두께 측정기의 광축이 서로 경사지게 한다. 결국 두께 측정기는 필름의 수직 두께가 아닌 경사진 두께를 측정하게 됨으로써 실제 두께보다 더 큰 값으로 측정하게 된다. 본 연구에서는, 플라스틱 필름의 경사로 인하여 발생하게 되는 두께 측정기에서의 계측값 오차를 보정하기 위하여, 필름의 경사 각도를 계측하는 연구가 진행되었다. 플라스틱 필름에 슬릿 빔 레이저를 조사하고, 필름에서 반사되는 슬릿 빔 레이저가 PSD(Position Sensitive Device)에 맺히는 광학 시스템을 구성하였으며, 실험을 통하여 필름의 경사 각도와 PSD 출력값의 관계를 1차 방정식 형태로 구하였다. 이를 이용하여 필름의 경사 각도를 측정하는 장치가 구축되었으며, 250KHz의 속도로 경사 각도의 측정이 가능하였다.

• 동력기계공학회지
• /
• 제16권6호
• /
• pp.52-58
• /
• 2012

Roll forming process is one of the most widely used processes in the world for forming metals such as a furniture drawer guide or an up and down slide guide. It can manufacture goods of the uniform cross section on a large scale throughout the continuous processing. In the domestic design and manufacture, roll forming process for production is taking most of the method of 2-point under rail slide. However, this method is vulnerable to the structural strength and stiffness is not suitable for high load conditions. Therefore, through systematic study of high load, low noise 3-point ball type of under rail slide its own design and manufacturing technology is the need to build. In this paper, to make center member of 3-point ball-type under rail slide for the refrigerator doors, the roll forming modeling and simulation are performed. Tensile test is performed about SCP-1 1/2H for determine the mechanical properties of materials. Modeling and simulation of roll forming is used MSC.MARC software of a dedicated analysis program used by rigid plastic finite element method. Interference between the roll and the final shape are predicted from the results of the simulation.

• 한국기계가공학회지
• /
• 제15권4호
• /
• pp.73-82
• /
• 2016

Recently, automobile industries have been developing many structural automotive parts made of thin, high-strength steel strips to produce safer and more environmentally friendly cars. The roll forming process has been considered one of the most efficient processes in manufacturing high-strength steel parts because it is a high-speed process that forms sheets in increments. However, most automotive parts vary longitudinally in their cross-sections. Therefore, it is difficult to apply the roll forming process to automotive parts made of high-strength steel. A variable section roll forming process has been proposed in recent studies. The rotational axes of the forming rolls are fixed, and the forming rolls have three-dimensional shape. As such, the cross-section of the part varies linearly along its length, and the angle between the bend line and longitudinal axis is less than 1 degree. Thus, the rate of cross-sectional variation along the length is relatively small. In this study, the rate of cross-sectional change along the length of a forming roll has been increased. Moreover, the angle between the bend line and longitudinal axis has been increased up to 15 degrees. The variable sections of the forming rolls have been designed for high strength steel parts with a symmetric u-type cross-section that varies linearly and symmetrically along the longitudinal axis.

• Progress in Superconductivity
• /
• 제14권2호
• /
• pp.82-86
• /
• 2012

A sensitive eight-channel high-Tc Superconducting Interference Device (SQUID) detection system for magnetic contaminant in a lithium ion battery anode was developed. Finding ultra-small metallic foreign matter is an important issue for a manufacturer because metallic contaminants carry the risk of an internal short. When contamination occurs, the manufacturer of the product suffers a great loss from recalling the tainted product. Metallic particles with outer dimensions smaller than 100 microns cannot be detected using a conventional X-ray imaging system. Therefore, a highly sensitive detection system for small foreign matter is required. We have already developed a detection system based on a single-channel SQUID gradiometer and horizontal magnetization. For practical use, the detection width of the system should be increased to at least 65 mm by employing multiple sensors. In this paper, we present an 8-ch high-Tc SQUID roll-to-roll system for inspecting a lithium-ion battery anode with a width of 65 mm. A special microscopic type of a cryostat was developed upon which eight SQUID gradiometers were mounted. As a result, small iron particles of 35 microns on a real lithium-ion battery anode with a width of 70 mm were successfully detected. This system is practical for the detection of contaminants in a lithium ion battery anode sheet.