• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.8 s.251
• /
• pp.1001-1007
• /
• 2006

In this paper we present robust optimal supporting positions for large glass panels used for TFT-LCD monitors when they are stored in a cassette during manufacturing process. The criterion taken is to minimize their maximum deflection. Since they are supported by some supports and have large deformations, contact analysis with a geometrically nonlinear effect is necessary. In addition, the center of a panel can not be positioned exactly as intended and should be considered as uncertainties. To take into account of these effects, the mean and the standard deviation of system response functions, particularly the deflection of the panels, need be calculated. A function approximation moment method (FAMM) is utilized to estimate them. It is a special type of response surface methodology for structural reliability analysis and can be efficiently used to estimate the two stochastic properties, that is, the system performance and the perturbations caused by uncertainties. For a design purpose, they are to be minimized simultaneously by some optimization algorithm to obtain robust optimal supporting positions.

• Structural Engineering and Mechanics
• /
• v.88 no.4
• /
• pp.311-322
• /
• 2023

Riverine flood is one of the critical natural threats to river-crossing bridges. As floods are the most-occurred natural hazard worldwide, survival probability of bridges due to floods must be assessed in a speedy but precise manner. In this regard, the paper presents a reliability-based approach for a rapid assessment of failure probability of vulnerable bridge components under floods. This robust method is generic in nature and can be applied to both concrete and steel girder bridges. The developed methodology essentially utilizes limit state performance functions, expressed in terms of capacity and flood demand, for probable failure modes of various vulnerable components of bridges. Advanced First Order Reliability Method (AFORM), Monte Carlo Simulation (MCS), and Latin Hypercube Simulation (LHS) techniques are applied for the purpose of reliability assessment and developing flood fragility curves of bridges in which flow velocity and water height are taken as flood intensity measures. Upon validating the proposed method, it is applied to a case study bridge that experiences the flood scenario of a river in Gujarat, India. Research outcome portrays how effectively and efficiently the proposed reliability-based method can be applied for a quick assessment of flood vulnerability of bridges in any flood-prone region of interest.

• The Korean Journal of Applied Statistics
• /
• v.28 no.2
• /
• pp.361-369
• /
• 2015

A general linear mixed-effects model is often used to analyze repeated measurement experiment data of a continuous response variable. However, a general linear mixed-effects model can give improper analysis results when simultaneously detecting heteroscedasticity and the non-normality of population distribution. To achieve a more robust estimation, we used a heavy-tailed linear mixed-effects model for a more exact and reliable analysis conclusion than a general linear mixed-effects model. We also provide reliability analysis results for further research.

• Journal of Computational Design and Engineering
• /
• v.3 no.3
• /
• pp.179-190
• /
• 2016

A kind of modified epoxy resin sheet molding compounds of the impeller has been designed. Through the test, the non-metal impeller has a better environmental aging performance, but must do the waterproof processing design. In order to improve the stability of the impeller vibration design, the influence of uncertainty factors is considered, and a multi-objective robust optimization method is proposed to reduce the weight of the impeller. Firstly, based on the fluid-structure interaction, the analysis model of the impeller vibration is constructed. Secondly, the optimal approximate model of the impeller is constructed by using the Latin hypercube and radial basis function, and the fitting and optimization accuracy of the approximate model is improved by increasing the sample points. Finally, the micro multi-objective genetic algorithm is applied to the robust optimization of approximate model, and the Monte Carlo simulation and Sobol sampling techniques are used for reliability analysis. By comparing the results of the deterministic, different sigma levels and different materials, the multi-objective optimization of the SMC molding impeller can meet the requirements of engineering stability and lightweight. And the effectiveness of the proposed multi-objective robust optimization method is verified by the error analysis. After the SMC molding and the robust optimization of the impeller, the optimized rate reached 42.5%, which greatly improved the economic benefit, and greatly reduce the vibration of the ventilation system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.12
• /
• pp.1631-1637
• /
• 2019

In this paper, we propose a low-complexity robust maximum likelihood (ML) receiver for generalized spatial modulation. The proposed receiver performs the transmit antenna partition to lower the computational loads. After we divide the transmit antenna combinations into two parts, one of which is "the likely TAC part," and the other of which is "the unlikely TAC part", based on the minimum mean square error (MMSE) filtering output. We first perform the maximum likelihood detection only in the likely TAC part. Then we evaluate the reliability of the solution found in the first search, and based its reliability we decide whether we continue the search in the unlikely TAC part. This partitioned search strategy maintains the performance of the conventional robust maximum likelihood receiver and simultaneously lowers computational loads. Through simulation, we found that our newly-proposed receiver achieves considerable gains over the conventional robust ML detector in terms of the computational loads while providing almost the same performance.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.3
• /
• pp.370-377
• /
• 2017

This paper presents a simple noise margin (NM) model of MOS current mode logic (MCML) gates especially in CMOS processes where a large device mismatch deteriorates logic reliability. Trade-offs between speed and logic reliability are discussed, and a simple yet accurate NM equation to capture process-dependent degradation is proposed. The proposed NM equation is verified for 130-nm, 110-nm, 65-nm, and 40-nm CMOS processes and has errors less than 4% for all cases.

• Journal of the Korean Ceramic Society
• /
• v.41 no.4
• /
• pp.273-276
• /
• 2004

Report ferroelectric memories based on 0.35$\mu\textrm{m}$ CMOS technology ensuring ten-year retention and imprint at 175$^{\circ}C$. This excellent reliability resulted from newly developed BT-based ferroelectric films with superior reliability performance at high temperatures, and also resulted from robust integration schemes free from ferroelectric degradation due to process impurities such as moisture and hydrogen. The superior reliabilities at high temperature of ferroelectric memories using BT-based films are due to the random orientation by special bake treatments.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.6
• /
• pp.1-8
• /
• 2017

In this paper, we propose a fault tolerance technique which enables embedded systems to run without interruption while its operating system and tasks fail. In order to improve reliability, the proposed scheme makes an embedded system run as a virtual machine on virtual machine monitor. It also prepares a contingency virtual machine at which periodical backups of the embedded system are saved. When an error occurs in the main virtual machine, the corresponding standby virtual machine takes a role of the main virtual machine and continues its operation. Especially such backups and switches of virtual machines are performed with minor performance degradation by manipulating page table entries in virtual machine monitor. By conducting performance evaluation studies, we show that the proposed scheme makes embedded system robust against errors while it does not degrade the performance of the system significantly.

• Proceedings of the Korean Reliability Society Conference
• /
• 2005.06a
• /
• pp.303-305
• /
• 2005

Recently, various plastics are used for improvement of reliability and thermal stability of electronic goods. But, it is difficult to choose suitable balance of grade resin to each other product property. Selection of high efficiency resin is becoming inescapable circumstance according to change of reflow temperature of product and development of product following to lead free. Using a inexpensive and reasonable resin, that sustain a uniform performance of product quality. It is make a robust product and increase a company's competitive power. Hereupon, I introduce example that use ESPI methods of thermal deformation analysis of product using in our company product. I try to refer to a structural weak point detection of real time measurement of electronic parts instead of mechanical and chemical measurement of specimen type.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.13 no.2
• /
• pp.43-51
• /
• 2017

Recently, MANET has been used in many fields as the range of applications increases. However, the dynamic topology that MANET has makes it difficult to route and provides the cause of exposure to security vulnerabilities. Therefore, the security features that can be robust to many attacks must have been applied in the routing technique provided in the MANET. In this paper, we propose a secure routing method that secure route is established by reliability evaluation of nodes and secure data communication has applied through key exchange mechanism. The proposed technique used hierarchical structure for efficiency of reliability evaluation of nodes. The reliability of nodes is performed by trust management node and reliability of nodes managed periodically is broadcasted. And the key exchange for secure data transmission is dene without CA as the certificate issuing organization. This allows fast key exchange and the integrity of data transmission improved. The proposed technique improves the security of the data transmission because a secure route to the destination node is established by the reliability evaluation and the data transmission is performed after the key between the source node and the destination node is exchanged through the established route.