• 전자공학회논문지 IE
• /
• 제45권4호
• /
• pp.54-59
• /
• 2008

본 논문은 S-DMB 수신을 위한 2단 저잡음 증폭기를 결합한 능동형 원편파 패치안테나를 설계 및 제작하였다. 제작된 능동형 안테나의 크기는 $40{\times}40{\times}15\;[mm]$로서 유전상수가 2.2인 테플론 기판으로 제작하였다. 측정된 안테나의 입력 반사손실과 3 dB 축비의 대역폭은 각각 긴 MHz와 25 MHz로 양호한 특성을 나타내었다. 제작된 2단 LNA의 특성을 측정한 결과 입력 반사손실, 출력 반사손실, 이득과 잡음지수는 각각 $S_{11}$=-14 [dB], $S_{22}$=-18 [dB], $S_{21}$=26.8 [dB], NF=1.14 [dB]의 우수한 값을 가졌다. 중심주파수 f=2.642 [GHz]에서 제작된 능동형 안테나의 총 이득은 30.4 [dB]인 양호한 값을 갖는다.

• 한국정보통신학회논문지
• /
• 제18권10호
• /
• pp.2359-2366
• /
• 2014

본 논문에서는 S-대역에서 동작하는 구형 마이크로스트립 패치 안테나의 인셋 급전 구조에 대해 연구하였다. 인셋 급전 구조에서 인셋의 길이와 폭의 변화에 따른 안테나의 반사손실 특성을 조사하였고, 결과로부터 최적 인셋 급전 안테나를 설계하고, 이득 및 복사패턴을 구하였다. 2.3 GHz에서 최적화된 안테나의 패치 크기는 $45.0mm{\times}40.9mm$, 인셋의 길이는 14 mm, 인셋의 폭은 1 mm이다. 그리고 유전율이 2.5, 두께가 0.787 mm인 기판을 사용하였으며, HFSS를 이용하여 시뮬레이션을 하였다. 인셋 급전 안테나를 제작하여 반사손실을 측정한 결과, 2.3025 GHz에서 -21.11 dB로 이론 결과와 일치함을 알 수 있었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.551-552
• /
• 2008

This paper presets a results of frequency response in variation of wire bonding length. A gold ball bonding is used as a wire bonding process, and a DPDT(double pole double thru) switch is adapted as a device for test. Wire length is ranged from 442um to 833um and a measured frequency range is from 1 GHz to 6 GHz. Little difference are measured in insertion loss and return loss depending on wire length. Measured S21 and S11 are -0.58 dB and -17.7 dB, respectively. S21 insertion loss is rising up and S11 insertion loss is falling down as the frequency is increased.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -2
• /
• pp.1009-1012
• /
• 2000

In this paper, we have designed and fabricated power PHEMT’s with an unit gate width of 80$\mu\textrm{m}$ and 4 fingers, and MIMIC power amplifiers using the PHEMT’s as well. The PHEMT’s have a 0.2$\mu\textrm{m}$ gate length and source to drain spacing of 3$\mu\textrm{m}$. The characteristics of the fabricated PHEMT’s are 4.08dB of S$\sub$21/ gain at the 35GHz and 317mS/mm of gm, and 62GHz of f$\sub$T/ and 120GHz of f$\sub$max/. The designed and fabricated MIMIC’s power amplifiers with 6 PHEMT’s and MIN capacitors were fully passivated by 1000 Α of Si$_3$N$_4$ film for higher performance and surface protects. The chips were processed using the MINT processes, and size was 3.25 ${\times}$ 1.8$\textrm{mm}^2$. The fabricated MIMIC power amplifiers have RF characteristics such as 11.25dB of S$\sub$21/ gain, 11.37dB of input return-loss and 12.69dB of output return-loss at the 34.55GHz.

• Journal of information and communication convergence engineering
• /
• 제4권3호
• /
• pp.108-110
• /
• 2006

Film bulk acoustic resonators for radio frequency wireless applications are presented. Various simulations and modeling were carried out. The impedance of a five-layered FBAR showed almost the same trend of the wideband characteristics as that of an ideal FBAR, but the characteristics of the higher modes appear to be much more suppressed. In addition, the wideband impedance decreased with increasing device size. The resonance characteristics depend strongly on the physical dimensions.

• Journal of information and communication convergence engineering
• /
• 제4권4호
• /
• pp.155-157
• /
• 2006

This paper presents the thermal technique to improve characteristic of planar spiral inductors. The spiral inductors were fabricated on silicon dioxide/silicon (SiO2/Si) wafer. The thermal treatment was done by annealing processes. The measure results showed a considerable improvement of return loss (Sl1). This thermal treatment seems very promising for enhancing spiral inductors based RF IC's.

• 한국ITS학회 논문지
• /
• 제6권3호
• /
• pp.101-110
• /
• 2007

본 논문에서는 UHF대역의 RFID 리더기용 원형편파 안테나를 설계 제작하였다. 그리고 설계 제작된 안테나의 성능분석을 통하여 Return Loss (S11)는 914 MHz에서 약 -45.529 dB로 상당히 적었으며, 안테나 이득은 약 6.09 dBi값을 얻었다. 또한 임피던스 매칭은 약 $50.48\;{\Omega}$이고, 사용 대역 중심 주파수인 911 MHz에서 축비는 1.2 dB로 설계되어 모든 RFID 리더기에 적용 가능함을 확인하였다. 따라서 RFID 리더기의 파라미터에서 가장 중요한 것 중 하나는 수신감도를 향상시켜서 원거리에서도 멀티태그를 인식하는데 있어서 원형편파 안테나의 이득을 높게 설계 제작함으로써 감도를 향상 시킬 것으로 기대 된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 영호남 합동 학술대회 및 춘계학술대회 논문집 센서 박막 기술교육
• /
• pp.77-81
• /
• 2006

We report the performance of a four-element, 11.67 GHz, high-Tc superconducting (HTS) microstrip antenna array with corporate feed network and circular polarization for direct broadcasting satellite (DBS) system. Our array antennas were designed and built on a 0.5 mm thick MgO substrate. To compare the superconducting antennas with normal conducting counterpart, One antenna pattern was fabricated from gold thin film, and a second pattern was fabricated from $YBa_2Cu_3O_{7-x}$ (YBCO) superconducting thin film. To improve the axial ratio of circularly polarized arrays, sequential rotation technique were used. Efficiency, radiation pattern, return loss and bandwidth were measured for both antennas at room temperature and at cryogenic temperature. The array produced good circular polarization, and the gain of the array at 77 K, relative to a copper array at room temperature was approximately 1.54 dB. The measured return loss of our HTS antenna array was 35.79 dB at the resonant frequency of 11.67 GHz and The total effective bandwidth was about 3.4 %. The results showed that high-temperature superconductors, when used in microstrip arrays, improved the efficiency of the HTS antenna array for circularly polarization.

• Journal of information and communication convergence engineering
• /
• 제5권4호
• /
• pp.320-323
• /
• 2007

This paper presents the resonance characteristics of the ZnO-based FBAR devices with multilayered Bragg reflectors with Cr adhesion layer inserted between $SiO_2$ and W layers. Due to the post- annealing, the return loss ($S_{11}$) and series/parallel quality factor are significantly improved when compared with the non-post annealing. This post-annealing method seems to be a very efficient way to improve the resonance characteristics of FBAR devices.

• 한국전기전자재료학회논문지
• /
• 제16권12호
• /
• pp.1077-1079
• /
• 2003

This paper describes the development of bulk acoustic wave (BAW) resonators using a PolyVinyliDene Fluoride (PVDF). The resonators have an air gap between a substrate for acoustic isolation without surface micromachining. We measured the resonance frequency and the input reflection coefficient (S$\sub$11/) of resonators using vector network analyzer. The fundamental resonance in this experimental result was measured at 1.4 ㎓ with a return loss of -23.2 ㏈. We can confirm a possibility of resonator application as using a PVDF because it can fabricate the resonator without etching process.