• Journal of Auto-vehicle Safety Association
• /
• v.12 no.4
• /
• pp.54-60
• /
• 2020

In a previous study, an investigation of occupant behaviors and injuries (to the head and chest) was performed during vehicle impact loading cases in order to ensure the safety of wheelchair passengers on a bus. The computational results showed overall safety tolerances of wheelchair occupants under different accident configurations. The bus crashworthiness is described as the capability of a bus to protect occupants during rollover loadings. The residual space containing occupants should be undamaged without any intrusions. However it is necessary to evaluate the residual space according to the bus occupant kinematic analysis under the rollover crash simulation. This study focuses on the evaluation of occupant behaviors during rollover loading cases in order to ensure the safety of bus passengers sitting in general seats and wheelchairs and evaluates the residual space of the bus by analyzing the bus occupant kinematics.

• Journal of Auto-vehicle Safety Association
• /
• v.15 no.4
• /
• pp.48-57
• /
• 2023

With the advance of autonomous vehicle technology various sitting posture is possible like relax position (inclined seating posture). Parametric study was done with MADYMO, a mutibody dynamics solver, to investigate the effect of sitting posture in different frontal crash modes, full frontal, 40% offset, and angled rigid barrier crash as well as various impact speeds. Hybrid III 50th male and 5th female dummies were used to figure out the difference induced by occupant weight and dimension. Restraint system parameters complying to current safety protocols like NCAP are studied if they still work effectively in relax position which is feasible with autonomous vehicles.

• The Korean Society of Law and Medicine
• /
• v.20 no.3
• /
• pp.175-209
• /
• 2019

The bundled discounting which the dominant undertakings engage in is problematic in terms of competition restraint. Bundled discounts generally benefit not only buyers but also sellers. Specifically, bundled discounts usually costs a firm less to sell multiple products. In addition, Bundled discounts always provide some immediate consumer benefit in the form of lower prices. Therefore, competition authorities and courts should not be too quick to condemn bundled discounts and apply the neutral and objective standard in bundled discounting cases. Cascade Health v. Peacehealth decision starts ruling from this prerequisite. This decision pointed out that the dominant undertaking can exclude rivals through bundled discounting without pricing its products below its cost when rivals do not sell as great a number of product lines. So bundled discounting may have the anticompetitive impact by excluding less diversified but more efficient producers. This decision did not adopt Lepage case's standard which does not require the court to consider whether the competitor was at least as efficient of a producer as the bundled discounter. Instead of that, based on cost based approach, this decision said that the exclusionary element can not be satisfied unless the discounts result in prices that are below an appropriate measures of the defendant's costs. By adopting a discount attribution standard, this decision said that the full amount of the discounts should be allocated to the competitive products. As the seller can easily ascertain its own prices and costs of production and calculate whether its discounting practices exclude competitors, not the competitor's costs but the dominant undertaking's costs should be considered in applying discount attribution standard. This case deals with bundled discounting practice of multiple healthcare services by the dominant undertaking in healthcare market. Under the Korean healthcare system and public health insurance system, the price competition primarily exists in non-medical care benefits because public healthcare insurance in Korea is in combination with the compulsory medical care institution system. The cases that Monopoly Regulation and Fair Trade Law deals with, such as cartel and the abuse of monopoly power, also mainly exist in non-medical care benefits. The dominant undertaking's exclusionary bundled discounting in Korean healthcare markets may be practiced in the contracts between the dominant undertaking and private insurance companies with regards to non-medical care benefits.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.834-837
• /
• 2005

In this paper, we describe the method of non-invasive blood pressure measurement using pulse wave transit time(PWTT). PWTT is a new parameter involved with a vascular that can indicate the change of BP. PWTT is measured by continuous monitoring of ECG and pulse wave. No additional sensors or modules are required. In many cases, the change of PWTT correlates with the change of BP. We measure pulse wave using the photo plethysmograph(PPG) sensor in an earlobe and we measure ECG using the ECG monitoring device our made in the chest. The measurement device for detecting pulse wave consists of infrared LED for transmitted light illumination, pin photodiode as light detector, amplifier and filter. We composed 0.5Hz high pass, 60Hz notch and 10Hz low pass filter. ECG measurement device consists of multiplexer, amplifier, filter, micro-controller and RF module. After amplification and filtering, ECG signal and pulse wave is fed through micro-controller. We performed the initial work towards the development of ambulatory BP monitoring system using PWTT. An earlobe is suitable place to measure PPG signal without the restraint in daily work. From the results, we can know that the dependence of PWTT on BP is almost linear and it is possible to monitoring an individual BP continuously after the individual calibration.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.553-562
• /
• 2008

A remediation technique for buried pipeline system subject to permanent ground deformation is proposed. Specifically, EPS (expanded polystyrene) geofoam blocks are used as low density backfill, thereby reducing soil restraint and pipeline strains. In order to evaluate this remediation technique, a series of 12 centrifuge model tests with HDPE pipe were performed. The amount or spatial extent of the low density backfill was varied, as well as the orientation of the pipe with respect to the fault offset. Specifically, in the $-63.5^{\circ}$ test, the orientation was such that the pipe was placed in flexure and axial tension. The $-85^{\circ}$ orientation placed the pipe mainly in flexure. In all cases, the behavior of the remediated pipe was compared to that for the unremediated pipe. The geofoam backfill was successful in improving pipe behavior for two of the three pipe/fault orientations. However, for the $60^{\circ}$ orientation, the pipe buckled in compression irrespective of the geofoam backfill.

• International Journal of Control, Automation, and Systems
• /
• v.1 no.4
• /
• pp.474-483
• /
• 2003

Belt drives provide freedom to position the motor relative to the load and this phenomenon enables reduction of the robot arm inertia. It also facilitates quick response when employed in robotics. Unfortunately, the flexible dynamics deteriorates the positioning accuracy. Therefore, there exists a trade-off between the simplicity of the control strategy to reject time varying disturbance caused by flexibility of the belt and precision in performance. Resonance of the system further leads to vibrations and poor accuracy in positioning. In this paper, accurate positioning of a belt driven mechanism using a feed-forward compensator under maximum acceleration and velocity constraints is proposed. The proposed method plans the desired trajectory and modifies it to compensate delay dynamics and vibration. Being an offline method, the proposed method could be easily and effectively adopted to the existing systems without any modification of the hardware setup. The effectiveness of the proposed method was proven by experiments carried out with an actual belt driven system. The accuracy of the simulation study based on numerical methods was also verified with the analytical solutions derived.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2007.04a
• /
• pp.241-246
• /
• 2007

The capacity of a lateral load resistance of a joint with Jangbu-connection of Dori-directional frame in traditional wood structure system was studied, through experiments of 1/2 scaled and T-shaped 7 subassemblies of joint of Dori-directional frame for Deawoongjeon of Bongjungsa. From the experiment, it was shown that the capacity of a lateral load resistance was influenced by the vertical load confining joint and not influenced by the number of Chok and the depth of Changbang, And lateral load resistance mechanism is developed by the restraint between the vertical load and the contacting edge of column; if structure is pushed to the left, the top-right end of Pyeongju contacts with Changbang and left Changbang loses the contacts with Pyeongju and therefore only right Changbang can resist to lateral load.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.198-201
• /
• 2015

Using Arduino with a pressure sensor to create an interest in modern health care program is aimed. Currently, Korea is estimated that there are 4.2 million people in total incontinence. Through the convergence of Bio Technology and InformationTechnology these patients it is easy and simple to induce urinary incontinence, erectile dysfunction treatment, etc., and to prevent the most effective pelvic floor muscle exercises (Kegel exercises below). The Kegel medical equipments which are currently sold in the market make users exercise by giving electrical stimulations compulsively. Users need to take off their bottoms and take the Femcon therapy in a closed room. This causes various restrictions of time, space and hygiene. This thesis designs a Kegel medical equipment which combines BT and IT, free form restraint in regard to space and hygiene, without the need to take off bottoms.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.21 no.4
• /
• pp.677-688
• /
• 1997

The purpose of this study was to find out the symbolism of religious costume which has showed the religious belief system through costume practice and culture. Indian Religious costume each has its own mark was investigated in this study. In India, religion is a way of life. It is an integral part of the entire Indian tradition. The results were as follows; India's several main religions are Hinduism(About 80% of population) , Islam (About 11% of population) , Sikhism(less than 2% of population) , Jainism(less than 1% of population) , Buddhism(less than 1% of population) and Christianity(About 3% of population but excluding here) Religious faith system which symbolized Godhood, spiritualty, ascetics, restraint, chastity, sacred and dignity gave a certain shape to each color, ornaments, dressing and marking of religion costume. In connection with religion costumes, there were Hindu's Tika, sacred ash, long hair, knot and holy band (Yajnopavita) , Buddhist's kayysa and tonsures, Jams' no covering, Muslim's chador and skullcap, Sikh's turban (with no cutting hair) , comb, steel bracelet, drawers, sword or dagger. The characteristics, head especially of thebody and white in the colors were made much account for India religion costume. Traditional costume seems to be worn at the present times in India. But apparently these costume associated with religion costume because of Hindu more than 80% of population.

• Journal of the Society of Naval Architects of Korea
• /
• v.46 no.4
• /
• pp.391-397
• /
• 2009

In this paper, longitudinal static stability is investigated, which is an essential requirement for the safety and the performance of the human powered hydrofoil boat (HPHB). In case a disturbance changes the trim angle of the boat, the derivative of the moment about the center of gravity must be negative in order to make the boat to be stable. The equation to evaluate the longitudinal static stability of the EPISODE, a HPHB of Chungnam National University with a height controlling system(HCS) is derived. From the derivative it is confirmed that a longitudinal and vertical position of the center of gravity is important for a HPHB. The range of a trim angle while the boat is foil-born was found with a HCS under the condition of mechanical restraint. And it is confirmed that the longitudinal static stability is satisfied for EPISODE in certain range of a trim angle. It is also shown that the longitudinal static stability and a range of the trim angle can be determined from the principal dimensions of a HPHB, therefore, it can be applied from the stage of the conceptual design of HPHB.