• The Korean Journal of Pharmacology
• /
• v.24 no.2
• /
• pp.221-232
• /
• 1988

Studies were conducted to determine whether reduced renal blood flow (RBF) exhibited by rats with uncontrolled, streptozotocin (STZ)-induced diabetes is attributable to diabetes-associated, enhanced renal vasoconstrictor influence of endogenous thromboxane $(TX)A_2$. Rats which were injected with STZ after pretreatment with 3-O-methyl glucose (3OMG), an agent which prevents STZ-induced hyperglycemia, were also studied. Basal values of total RBF (RBF; ml $min^{-1}$ $gKw^{-1}$; electromagnetic flow probe), systemic arterial pressure (BP; mm Hg) and renal vascular resistance (RVR;BP $RBF^{-1})$in pentobarbital-anesthetized rats during a control period were $5.9{\pm}0.3$(P<0.1_{VS}. CR), $115{\pm}3$ and $20.3{\pm}1.0$(P<0.1_{VS}. CR) for STZR (n=15), and $8.4{\pm}0.4$, $123{\pm}3$ and $15.1{\pm}0.8$ for age-matched control rats (CR; n= 15), respectively. Basal values of RBF, BP and RVR in 3OMG pretreated STZR were identical to CR. In preparations shown capable of renal vasodilatation, OKY 1581 (1 mg/kg, i.v. followed by 0.4 mg/kg min infusion) abolished arachidonate-induced $(TX)A_2$ synthesis, but did not alter basal BP, RBF or RVR in either STZR or CR (n=4/group). Similarly, i.r.a. infusion of SQ29548 (100 ng/ml RBF) abolished renal vasoconstriction induced by a TX/prostaglandin endoperoxide mimic, U46619, but had no discern able affect on RVR in either STZR (n=8) or CR (n=8). The data indicates that $TXA_2$ does not participate in the elevated basal RVR of STZR which are associated with the diabetic state.

• Journal of Korea Soil Environment Society
• /
• v.4 no.1
• /
• pp.109-118
• /
• 1999

Recently, transport parameters of conservative solutes such as KCl in a porous medium have been successfully determined using time domain reflectometry (TDR) . This study was initiated to Investigate the applicability of TDR technique to monitoring the fate of a heavy metal ion in a sandy soil and the distribution of its concentration along travel distance with time. A column test was conducted in a laboratory that consists of monitoring both resident and flux concentrations of $ZnCl_2$in a sandy soil under a breakthrough condition. A tracer of $ZnCl_2$(10 g/L) was injected onto the top surface of the sample as pulse type as soon as a steady-state condition was achieved. Time-series measurements of resistance and electrical conductivity were performed at 10 cm and 20 cm of distances from the inlet boundary by horizontal-positioning of parallel TDR metallic rods and using an EC-meter for the effluent exiting the bottom boundary respectively. In addition. Zn ions of the effluent were analyzed by ICP-AES. Since the mode and position of concentration detected by TDR and effluent were different, comparison between ICP analysis and TDR-detected concentration was made by predicting flux concentration using CDE model accommodating a decay constant with the transport parameters obtained from the resident concentrations. The experimental results showed that the resident concentration resulted in earlier and higher peak than the flux concentration obtained by EC-meter, implying the homogeneity of the packed sandy soil. A close agreement was found between the predicted from the transport parameters obtained by TDR and the measured $ZnCl_2$concentration. This indicates that TDR technique can also be applied to monitoring heavy metal concentrations in the soil once that a decay constant is obtained for a given soil.

• Korean Journal of Materials Research
• /
• v.8 no.7
• /
• pp.621-627
• /
• 1998

The formation of Co-silicide between Co/Zr bilayer on the amorphous and crystalline Si substrates has been investigated. The films of Zr(50$\AA$) and Co(l50$\AA$) were deposited with e-beam evaporation system and were heattreated with the rapid thermal annealing system at the temperatures between 50$0^{\circ}C$ and 80$0^{\circ}C$ with 10$0^{\circ}C$ increments for 30 seconds. The phase identification of Co-silicide was carried out by XRD and the chemical analysis was examined by AES and RBS. The interface morphologies of Co/Zr bilayer films were investigated by cross sectional TEM and HRTEM. $CoSi_2$ was formed epitaxially on the crystalline Si substrate above $700^{\circ}C$ while polycrystalline $CoSi_2$ was grown on the amorphous Si substrate. The formation temperature of Co-silicide on the amorphous Si substrate was about 100 C lower than that on the crystalline Si. The COzSi phase was not identified on the both Si substrates. The formation temperature of first phase of Co-silicide on ColZr bilayer was higher than that on Co mono layer. CoSizlayer formed on the amorphous Si substrate exhibits better uniformity compared to the CoSiz formed on the crystalline substrate. The sheet resistance of CoSiz layer on crystalline Si was lower than that on the amorphous Si at high temperatures.tures.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.14-14
• /
• 2011

W (tungsten)-alloys will be the most promising plasma facing armor materials in highly loaded plasma interactive components of the next step fusion reactors due to its high melting point, high sputtering resistance and low deuterium/tritium retention. The bonding technology of tungsten to Cu alloy was one of the key issues. In this paper, W/CuCrZr diffusion bonding has been performed successfully by inserting pure metal interlay. The joint microstructure, interfacial elements migration and phase composition were analyzed by SEM, EDS, XRD, and the joint shear strength and micro-hardness were investigated. The mock-ups were fabricated successfully with diffusion bonding and the cladding technology respectively, and the high heat flux test and thermal fatigue test were carried out under actively cooling condition. When Ni foil was used for the bonding of tungsten to CuCrZr, two reaction layers, Ni4W and Ni(W) layer, appeared between the tungsten and Ni interlayer with the optimized condition. Even though Ni4W is hard and brittle, and the strength of the joint was oppositely increased (217 MPa) due primarily to extremely small thicknesses (2~3 ${\mu}m$). When Ti foil was selected as the interlayer, the Ti foil diffused quickly with Cu and was transformed into liquid phase at $1,000^{\circ}C$. Almost all of the liquid was extruded out of the interface zone under bonding pressure, and an extremely thin residual layer (1~2 ${\mu}m$) of the liquid phase was retained between the tungsten and CuCrZr, which shear strength exceeded 160 MPa. When Ni/Ti/Ni multiple interlayers were used for bonding of tungsten to CuCrZr, a large number of intermetallic compound ($Ni_4W/NiTi_2/NiTi/Ni_3T$) were formed for the interdiffusion among W, Ni and Ti. Therefore, the shear strength of the joint was low and just about 85 MPa. The residual stresses in the clad samples with flat, arc, rectangle and trapezoid interface were estimated by Finite Element Analysis. The simulation results show that the flat clad sample was subjected maximum residual stress at the edge of the interface, which could be cracked at the edge and propagated along the interface. As for the rectangle and trapezoid interface, the residual stresses of the interface were lower than that of the flat interface, and the interface of the arc clad sample have lowest residual stress and all of the residual stress with arc interface were divided into different grooved zones, so the probabilities of cracking and propagation were lower than other interfaces. The residual stresses of the mock-ups under high heat flux of 10 $MW/m^2$ were estimated by Finite Element Analysis. The tungsten of the flat interfaces was subjected to tensile stresses (positive $S_x$), and the CuCrZr was subjected to compressive stresses (negative $S_x$). If the interface have a little microcrack, the tungsten of joint was more liable to propagate than the CuCrZr due to the brittle of the tungsten. However, when the flat interface was substituted by arc interfaces, the periodical residual stresses in the joining region were either released or formed a stress field prohibiting the growth or nucleation of the interfacial cracks. Thermal fatigue tests were performed on the mock-ups of flat and arc interface under the heat flux of 10 $MW/m^2$ with the cooling water velocity of 10 m/s. After thermal cycle experiments, a large number of microcracks appeared at the tungsten substrate due to large radial tensile stress on the flat mock-up. The defects would largely affect the heat transfer capability and the structure reliability of the mock-up. As for the arc mock-up, even though some microcracks were found at the interface of the regions, all microcracks with arc interface were divided into different arc-grooved zones, so the propagation of microcracks is difficult.

• Weed & Turfgrass Science
• /
• v.7 no.3
• /
• pp.209-218
• /
• 2018

This study was carried out to investigate the occurrence and distribution of ALS inhibiting herbicide-resistant weeds and to estimate the appeared areas of resistant weeds in the paddy fields of Gyeongnam province of Korea in 2017 and 2018 using a soil assay method. Compared with the 2012 survey, this study showed that the infested ratio of ALS inhibiting herbicide-resistant weeds increased from 1.0% to 66.8% and the infested area increased from 876 ha to 49,008 ha. The infested area of ALS inhibiting herbicide-resistant weeds was estimated in Ulsan-si (8.4%), Hapcheon-gun (8.3%), Haman-gun (7.9%), Goseong-gun (7.9%), Hadong-gun (7.3%), Jinju-si (7.2%), Changnyeong-gun (7.0%), Gimhae-si (6.4%), Miryang-si (5.5%), Busan-si (4.9%), Uiryeong-gun (4.6%), Namhae-gun (4.3%), Geochang-gun (4.2%), Changwon-si (3.8%), Geoje-si (2.9%), Yangsan-si (1.8%), Sancheong-gun (0.9%) and Tongyeong-si (0.4%), and the herbicide resistant weeds was not occurred in Hamyang-gun. The most dominant ALS inhibiting herbicide-resistant weeds in paddy fields were Monochoria vaginalis, followed by Echinochloa oryzicola, Lindernia dubia, Scirpus juncoides, Ludwigia prostrata, Cyperus difformis, Sagittaria trifolia and Rotala indica. ALS inhibiting herbicide-resistant M. vaginalis, L. dubia, and E. oryzoides occurred throughout Gyeongnam province, and ALS inhibiting herbicide-resistant S. trifolia and R. indica were only found in Gimhae-si. Therefore, these results will be utilized to estimate population dynamics of ALS inhibiting herbicide-resistant weeds and provide proper management practices in the paddy fields of Gyeongnam province.

• Weed & Turfgrass Science
• /
• v.7 no.3
• /
• pp.181-190
• /
• 2018

This study was conducted to investigate the occurrence of an acetolactate synthase (ALS) inhibiting herbicide resistant weed on paddy at 289 sites by soil sampling in Chungcheongbuk-Do of Republic of Korea from February to April in 2017. The most dominant weed was Monochoria vaginalis and Echinochloa oryzicola on each city and county. ALS inhibiting herbicide resistant ratio and occurrence area were 80.6% and 28,272 ha, respectively, in Chungcheongbuk-Do which was 3 times than in 5 years ago. The herbicide resistant ratio, Okcheon-Gun was the highest at 93.8%, Chungju-Si, Boeun-Gun, Yeongdong-Gun, Jincheon-Gun and Geosan-Gun were over 80%, Cheongju-Si, Eumseong-Gun and Jeungpyeong-Gun were over 70%. The herbicide resistant area, Cheongju-Si had the largest at 6,957 ha, Chungju-Si was 4,277 ha, Jincheon-Gun and Boeun-Gun was 3,536 ha and 3,282 ha, respectively. By weed, ALS inhibiting herbicide resistant ratio and occurrence area, Monochoria vaginalis was 49%, 17,646 ha, Echinochloa oryzicola 44%, 15,617 ha, Schoenoplectiella juncoides 29%, 10,377 ha, respectively. In all cities and counties of Chungcheongbuk-Do, Monochoria vaginalis and Echinochloa oryzicola are more than 40% resistant to ALS inhibiting herbicides, intensive management is required. The use of sulfonylurea herbicides is increasing, most farmers use herbicides 10 days after transplanting, so management after transplanting is necessary and the occurrence of herbicide resistant weeds should be reduced by alternating herbicide application every year.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.4
• /
• pp.333-340
• /
• 2010

The Korean Dendropanax lacquer, made from a natural resinous sap from Dendropanax orbifera Lev., was used as a golden and transparent varnish for the traditional artifacts (armor uits, helmets, arrowheads, etc.) to make them be brilliant golden color. The cured film of the acquer has excellent protective properties such as weatherability, water resistance, and nticorrosive. But, one of disadvantages is that takes a long time and much energy to fulfill curing the lacquer. The chemical constituents of the lacquer contained conjugated diene compounds s the photopolymerizable monomers. These monomers easily polymerized in sunlight to form olden-colored, hard-coating films in a short time. Photooxidation may be one of the most mportant reactions in the chemistry of the lacquer. Although the Korean Dendropanax Lacquer hould be dried to a thoroughly dry stage to achieve optimal film properties, curing with elevated emperatures may be required for the protracted curing time at atmospheric temperature. So we ntended to accelerate the curing rate of the lacquer by dual curing of thermal and radiation uring. The effect of thermal initiator on the thermal curing reaction was evaluated by monitoring he changes in double bond peak with FT-IR. Then the curing rate of the lacquer blended with hermal initiator and photoinitiator together was measured during dual curing using a RPT with V spot curing machine. Thermal initiator not only accelerated the curing rate but also improved he physical property. And the curing rate of the Korean Dendropanax lacquer was improved by ual curing method of thermal and UV curing. According to these results, the application area of he Korean Dendropanax lacquer could be expanded to surface coatings for electronic devices uch as mobile phones or electronics.

• Korean Journal of Soil Science and Fertilizer
• /
• v.21 no.4
• /
• pp.373-379
• /
• 1988

This experiment was carried out to investigate the effects of long-term applications of rice straw and compost on the physical and mechanical properties of paddy fields and the yearly variation of rice yield in Fluvio-Marine plain of Jeonbug series. Amounts of rice straw and compost applied in this experiment were 500kg/10a, 1,000kg/10a respectively, and the nitrogen levels were 0, 15 and 20kg/10a. This experiment were continued for 9 years from 1979 to 1987. The results are summarized as follows: 1. Clay and silt ratios were decreased but versa in sand ratio, by the long-term application of rice straw and compost. 2. Bulk density in the long-term application of organic matter was lower in surface soil of non-application than nitrogen application (15kg/10a) and in rice straw than compost. 3. Solid ratio went down, but liquid and gaseous ratio went up especially, by organic matter application liquid ratio were increased by compost and gaseous ratio were increased by in rice straw. 4. Aggregates of bigger than 2mm were increased by long-term application of organic matter, and the effects was better in rice straw than compost. Accumulative aggregate of 2mm was 66.5% in nitrogen of 15kg/ 10a with rice straw, which showed the increase of 9.1% in comparison with the non-application of nitrogen and organic matter. 5. Liquid limit, plastic limit and plastic index were high in order of rice straw, compost and control, and liquid index was lower in compost than in rice straw. 6. Cole value was higher in vertical than horizontal and highest in the application of rice straw with nitrogen of 15kg/10a. Cone and shearing resistance were lowest in the application of rice straw with nitrogen. In total vertical pressure friction was higher in the long-term application of organic matter than control. 7. The change of yield index was higher in the long-term application of compost than rice straw in non-nitrogen and it showed the yearly competitive variation between the long-term application of compost and rice straw in nitrogen of 10kg/10a. In nitrogen application of 20kg/10a, it was increased from 6th year by rice straw application.

• The Journal of the Petrological Society of Korea
• /
• v.16 no.3
• /
• pp.144-161
• /
• 2007

The studied Nangsan area is widely covered by the Jurassic biotite granodiorite, which is mainly light grey in color and medium-grained in texture. Results of the regional fracture pattern analysis for the granodiorite body are as follows. Strike directions of fractures show three dominant sets in terms of frequency order. The sets are in an order of a (1) $N80^{\circ}{\sim}90^{\circ}E$ (1st-order)>(2) $N70^{\circ}{\sim}80^{\circ}E$ (2nd-order)>(3) $NS{\sim}N10^{\circ}E$ (3rd-order). Spacings of the fractures are mostly predominant in less than 200 cm. Therefore, the granodiorite of the area has more potential for non-dimensional stones than dimension ones. And orientations of vertical quarrying planes can be also divided into two groups in terms of frequency $N14^{\circ}W{\sim}N16^{\circ}E$ (1st-order) and (2) $N78^{\circ}E{\sim}N88^{\circ}E$ (2nd-order). The orientations of the two groups are more or less different from those of the regional fracture patterns. These can be mainly attributed to the preferred orientations of microcrack developed in the quarries. Of physical properties, specific gravity, absorption ratio, porosity, compressive strength, tensile strength and abrasive hardness are 2.65, 0.28%, 0.73%, $1,628kg/cm^2,\;100kg/cm^2$ and 31, respectively. Contrary to the porosity, both granites of the Nangsan and Sogrisan areas show almost similar values of the abrasive hardness. These can be explained by the differences of Qz+Af modes, which can be regarded as an index for abrasive resistance. Meanwhile, it is anticipated that comprehensive understanding of the orientations of vertical quarrying planes and characteristics of various physical properties will be utilized as an important information for stone resources.

• Korean Journal of Medicinal Crop Science
• /
• v.6 no.1
• /
• pp.11-15
• /
• 1998

This experiment was conducted to investigate the soil temperature. the characteristics of seedling growth and drought resistance of Job's tears under different seeding depth. The changes of soil temperature were similar to the patterns of atmosphere temperature. and the minimum and maximum temperature of the day were at 08: 00 and 16: 00 hours, respectively, and this was 1 hour late compared to the atmospheric temperature. In mean temperature under different soil depth, 3cm and 4cm soil depth were the same as $27.3^{\circ}C$ which was higher than that at 1cm and 2cm soil depth. Percentage of emergence was 81.2% at 4cm soil depth in Yulmoo 1 ho and 88.0% at 3cm soil depth in Yunchon 9 ho, respectively. Days to emergence after seeding was shortest at 1cm seeding depth as about 9 days and was 2 to 3 days later at other soil depth of 2, 3, 4cm compared to 1cm soil depth plot. Plant height and dry matter weight was highest at 3cm soil depth in Yulmoo 1 ho and at 4cm soil depth in Yunchon 9 ho. In the drought conditions, percent of survived plant was highest at 4cm soil depth plot of both varieties as 51.3% and 60.0%, respectively. In the drought conditions, soil depth was positively correlated with % of emergence, days to emergence after seeding, plant height, and dry matter weight per plant.