초록
낭산지역 일대의 쥬라기 흑운모 화강섬록암은 담회색, 치밀조직을 이루는 중립질암이다. 암체에 대한 광역적인 열극체계 분석결과는 다음과 같다. 열극의 주향은 빈도등급에 의하여 크게 세 방향으로 분류가 가능하다. 이들 열극은 빈도등급에 의하여 (1) $N80^{\circ}{\sim}90^{\circ}E$ (1st-order)>(2) $N70^{\circ}{\sim}80^{\circ}E$ (2nd-order)>(3) $NS{\sim}N10^{\circ}E$ (3rd-order)의 순으로 나타난다. 특히 이들 열극의 간격은 200 cm 미만의 것들이 대부분을 차지한다. 따라서 분석된 열극체계 및 간격으로 미루어 낭산일대에서는 규격석보다 비규격석의 산출이 훨씬 많아 쇄석자원의 잠재성이 더 클 것으로 해석된다. 특히 밀집하는 기존 석산의 수직상 채석면의 방향도 빈도등급에 의하여 두 그룹으로 분류되어, (1) $N14^{\circ}W{\sim}N16^{\circ}E$ (1st-order)와 (2) $N78^{\circ}E{\sim}N88^{\circ}E$ (2nd-order)에서 뚜렷이 우세하다. 상기한 두 그룹의 수직상 채석면의 방향은 광역적 열극체계와는 다소 차이가 있다. 이와 같은 현상은 단위 석산에서 발달하는 미세균열의 배향성과 크게 관련되는 것으로 볼 수 있다. 낭산지역의 물성 중에서 비중, 흡수율, 공극률, 압축강도, 인장강도와 마모경도는 각각 2.65, 0.28%, 0.73%, $1,628kg/cm^2,\;100kg/cm^2$ 및 31의 평균값을 가진다. 공극률의 경우와는 달리, 낭산 및 속리산지역의 화강암류는 상호 유사한 마모경도를 가진다. 이는 마모저항의 지표로 간주되는 석영과 알칼리장석의 모우드 값의 차이로 설명될 수 있다. 한편 낭산지역의 연구를 통하여 규명된 수직상 채석면의 방향 및 각종 물성특성의 전반적인 이해는 차후 이 지역의 암석자원 활용 시주요 정보로 활용될 것으로 기대된다.
The studied Nangsan area is widely covered by the Jurassic biotite granodiorite, which is mainly light grey in color and medium-grained in texture. Results of the regional fracture pattern analysis for the granodiorite body are as follows. Strike directions of fractures show three dominant sets in terms of frequency order. The sets are in an order of a (1) $N80^{\circ}{\sim}90^{\circ}E$ (1st-order)>(2) $N70^{\circ}{\sim}80^{\circ}E$ (2nd-order)>(3) $NS{\sim}N10^{\circ}E$ (3rd-order). Spacings of the fractures are mostly predominant in less than 200 cm. Therefore, the granodiorite of the area has more potential for non-dimensional stones than dimension ones. And orientations of vertical quarrying planes can be also divided into two groups in terms of frequency $N14^{\circ}W{\sim}N16^{\circ}E$ (1st-order) and (2) $N78^{\circ}E{\sim}N88^{\circ}E$ (2nd-order). The orientations of the two groups are more or less different from those of the regional fracture patterns. These can be mainly attributed to the preferred orientations of microcrack developed in the quarries. Of physical properties, specific gravity, absorption ratio, porosity, compressive strength, tensile strength and abrasive hardness are 2.65, 0.28%, 0.73%, $1,628kg/cm^2,\;100kg/cm^2$ and 31, respectively. Contrary to the porosity, both granites of the Nangsan and Sogrisan areas show almost similar values of the abrasive hardness. These can be explained by the differences of Qz+Af modes, which can be regarded as an index for abrasive resistance. Meanwhile, it is anticipated that comprehensive understanding of the orientations of vertical quarrying planes and characteristics of various physical properties will be utilized as an important information for stone resources.