• ETRI Journal
• /
• v.35 no.1
• /
• pp.1-6
• /
• 2013

In this paper, we present an implemented serial 40-Gb/s receiver optical subassembly (ROSA) module by employing a proposed TO-CAN package and flexible printed circuit board (FPCB). The TO-CAN package employs an L-shaped metal support to provide a straight line signal path between the TO-CAN package and the FPCB. In addition, the FPCB incorporates a signal line with an open stub to alleviate signal distortion owing to an impedance mismatch generated from the soldering pad attached to the main circuit board. The receiver sensitivity of the ROSA module measures below -9 dBm for 40 Gb/s at an extinction ratio of 7 dB and a bit error rate of $10^{-12}$.

• ETRI Journal
• /
• v.40 no.3
• /
• pp.337-346
• /
• 2018

In this paper, we propose a grant-aware (GA) scheduling algorithm that can provide higher throughput and lower latency than a conventional dual round-robin matching (DRRM) method. In our proposed GA algorithm, when an output receives requests from different inputs, the output not only sends a grant to the selected input, but also sends a grant indicator to all the other inputs to share the grant information. This allows the inputs to skip the granted outputs in their input arbiters in the next iteration. Simulation results using OPNET show that the proposed algorithm provides a maximum 3% higher throughput with approximately 31% less queuing delay than DRRM.

• 한국생물공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.490-490
• /
• 2005

• ETRI Journal
• /
• v.30 no.2
• /
• pp.308-314
• /
• 2008

In this paper, we describe the fabrication of 3.5-inch QCIF active matrix organic light emitting display (AMOLED) panels driven by thin film transistors, which are produced by an ultra-low-temperature polycrystalline silicon process on plastic substrates. The over all processing scheme and technical details are discussed from the viewpoint of mechanical stability and display performance. New ideas, such as a new triple-layered metal gate structure to lower leakage current and organic layers for electrical passivation and stress reduction are highlighted. The operation of a 3.5-inch QCIF AMOLED is also demonstrated.

• ETRI Journal
• /
• v.32 no.5
• /
• pp.646-656
• /
• 2010

A component is a reusable and replaceable software module accessed through its interface. Component-based development is expected to shorten the development period, reduce maintenance costs, and improve program reusability and the interoperability of components. This paper proposes a new robot software component platform in order to support the entire process of robot software development. It consists of specifications of a component model, component authoring tool, component composer, and component execution engine. To show its feasibility, this paper presents the analysis results of the component's communication overhead, a comparison with other robotic software platforms, and applications in commercial robots.

• ETRI Journal
• /
• v.26 no.4
• /
• pp.344-350
• /
• 2004

We propose a filter-free wavelength conversion using a Mach-Zehnder interferometer with monolithically integrated $2{\times}2$ multimode interference semiconductor optical amplifiers (MMI-SOAs). The device has been optimized by considering a non-homogeneous carrier distribution due to the self-imaging properties of the MMI-SOA. Static measurements show an extinction ratio of up to 18 dB and an input signal rejection ratio of up to 20 dB.

• Carbon letters
• /
• v.15 no.3
• /
• pp.151-161
• /
• 2014

Exceptional progress has been made with chemical vapor deposition (CVD) of graphene in the past few years. Not only has good monolayer growth of graphene been achieved, but large-area synthesis of graphene sheets has been successful too. However, the polycrystalline nature of CVD graphene is hampering further progress as graphene property degrades due to presence of grain boundaries. This review will cover factors that affect nucleation of graphene and how other scientists sought to obtain large graphene domains. In addition, the limitation of the current research trend will be touched upon as well.

• ETRI Journal
• /
• v.34 no.5
• /
• pp.753-758
• /
• 2012

As the next-generation video coding standard, High Efficiency Video Coding (HEVC) has adopted advanced coding tools despite the increase in computational complexity. In this paper, we propose a selective bi-prediction method to reduce the encoding complexity of HEVC. The proposed method evaluates the statistical property of the sum of absolute differences in the motion estimation process and determines whether bi-prediction is performed. A performance comparison of the complexity reduction is provided to show the effectiveness of the proposed method compared to the HEVC test model version 4.0. On average, 50% of the bi-prediction time can be reduced by the proposed method, while maintaining a negligible bit increment and a minimal loss of image quality.

• ETRI Journal
• /
• v.27 no.6
• /
• pp.677-684
• /
• 2005

A phased array antenna was fabricated using four-element ferroelectric phase shifters with a coplanar waveguide (CPW) transmission line structure based on a $Ba_{0.6}Sr_{0.4}TiO_3(BST)/MgO$ structure. Epitaxial BST films were deposited on MgO (001) substrates by pulsed laser deposition. To attain the large differential phase shift and small losses for a ferroelectric CPW phase shifter, an impedance-matching-part adding technique between the effective transmission line and connecting cable was used. The return loss and insertion loss for this techniqueadapted BST CPW device were improved with respect to those for a normal BST CPW device. For an X-band phased array antenna system consisting of ferroelectric BST CPW phase shifters, power divider, dc block, patch antenna, and programmed dc power, the steering beam could be tilted by $15^{\circ}$ in either direction.

• ETRI Journal
• /
• v.34 no.2
• /
• pp.280-283
• /
• 2012

By inserting $H_2O$ treatment steps during atomic layer deposition of a ZnO layer, the turn-on voltage shift from negative bias stress (NBS) under illumination was reduced considerably compared to that of a device that has a continuously grown ZnO layer without any treatment steps. Meanwhile, treatment steps without introducing reactive gases, and simply staying under a low working pressure, aggravated the instability under illuminated NBS due to an increase of oxygen vacancy concentration in the ZnO layer. From the experiment results, additional oxidation of the ZnO channel layer is proven to be effective in improving the stability against illuminated NBS.