• Korean Journal of Poultry Science
• /
• v.31 no.3
• /
• pp.193-198
• /
• 2004

This study was conducted for improvement of meat quality in broiler chcikens. Birds were fed basal diet(control), ferritin, illite, betafin, or wood vinegar counting broiler feed according as broiler growth stage. Birds fed with basal diet, which was distributed under the best environmental condition, were more weight gain than other groups reared under same environmental condition. In the mean weight gain, the ferritin-group showed the highest and the illite-group showed the lowest among the feed additive groups; therefore, the effect of feed requirement change in odor reduction in illite and methyl saving of betafin was lower than those of other feed additives along to pass rear time. Meat quality was appraised by National Livestock Research Institute of RDA. Except the control-group, that had the best feed conversion ratio, the cooking loss of the illite-group was the biggest among groups although the illite-group chickens had a good water hold capacity. Therefore, illite is not good for making merchandise by reason that group chickens get reduction carcass weight after slaughter. On the other hand, the ferritin-group got the highest point of shear stress, cooking loss, and crude fat level. That group showed the best appraise in both breast and leg of sensory test in company and also feed conversion ratio was the highest among feed additive groups. As a result, the ferritin-group might use for making new merchandise among the feed additive groups.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.35 no.4
• /
• pp.268-274
• /
• 2015

Weld overlay was first used in power plants in the US in the early 1980s as an interim method of repairing the welds of flawed piping joints. Weld overlaid piping joints in nuclear power plants must be examined periodically using ultrasonic examination technology. Portable phased array ultrasonic technology has recently become available. Currently, the application of preemptive weld overlays as a mitigation technique and/as a method to improve the examination surface condition for more complex configurations is becoming more common. These complex geometries may require several focused conventional transducers for adequate inspection of the overlay, the original weld, and the base material. Alternatively, Phased array ultrasonic probes can be used to generate several inspection angles simultaneously at various focal depths to provide better and faster coverage than that possible by conventional methods. Thus, this technology can increase the speed of examinations, save costs, and reduce radiation exposure. In this paper, we explain the general sequence of the inspection of weld overlay and the results of signal analysis for some PAUT (phased array ultrasonic testing) signals detected in on-site inspections.

• Korean Journal of Organic Agriculture
• /
• v.23 no.1
• /
• pp.43-58
• /
• 2015

This study is conducted in order to select the varieties that can supplement problems related with organic cultivation of bulb onion (Allium cepa L.). 15 test varieties were selected considering rural preference, breeding line, breeding company, open-pollinated cultivar, F1 hybrid cultivar of either domestic or foreign products. Onion varieties were assessed in 5 criteria which are : growth of plants in low temperature, freezing injury resistance, resistance to physiological disorder such as bolting and doubled bulb, lodging index during harvest, and marketable yield. As a result, e-Joeun, Katamaru, Pop, Art, Singihan among F1 hybrid cultivars and Changnyeongdaego, Seouldaego, and Chunjujunggo among open-pollinated cultivars were selected as more suitable varieties for the organic cultivation. Although Sunpower cannot be selected in varieties those are suitable for organic cultivation, it showed excellent traits in the bulb characteristics. No significant differences were found between open-pollinated cultivar and F1 hybrid cultivar except growth of plants in low temperature (plant sheath diameter) and lodging index during harvest (May 24th). And no significant differences were recognized between domestic varieties and foreign varieties except missing plant ratio after wintering.

• Journal of radiological science and technology
• /
• v.39 no.3
• /
• pp.435-441
• /
• 2016

The importance of radiation dose display of medical X-ray equipment was emphasized, while third edition of IEC(International Electrotechnical Commission) 60601 started to apply. The existing medical X-ray equipment selected a method for attaching the DAP(Dose Area Product) meter when the dose display. However, because the DAP meter was dependent on all of the income, And it did not yet produced in Korea. So, we received the support of Seoul R&BD Program(Grants No. C1152055) to produce DAP meter prototype of the Domestically technology. In this study, the performance of this prototype was evaluated by comparing the German company's product Evaluation item was an electronic capture performance, radiation dose dependence, radiation quality dependence, energy transmittance, repeatability, light transmittance of 6 entries. And IEC 60580 was based on this evaluation. Evaluation results were electronic capture performance intrinsic error 9.5%, radiation dose dependence limits of variation 1%, repeatability coefficient of variation 2%, energy transmittance 91% each assessment was passed. However radiation quality dependence limits of variation 29%, light transmittance 55% was less than acceptance criteria.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.24 no.3
• /
• pp.359-364
• /
• 2014

Objectives: The principal aim of this study is to provide fundamental data for suggesting substantial management plan of personal air sampler by investigating current situation of work environment monitoring service provider. Materials and Methods: The questionnaires regarding a personal air sampler were sent by electronic mail to 150 institutions, except for 22 institutions which are out of business or closed temporarily, among total 172 domestic work environment monitoring service providers designated by Ministry of Employment and Labor based on 2013. The institutions which did not reply to the questionnaire for 30 days were required directly by phone call. Finally 97 institutions gave an answer to the questionnaire and therefore the respondence rate was 65%. Results: The normal operation rate of personal air sampler exceeded 70% in all the types (particle, gas and both combination) in terms of purchased year. Furthermore the personal air sampler purchased recently showed a trend of high operation rate compared to the personal air sampler purchased previously. The distribution patterns of personal air sampler In terms of manufacturers were Gillian>MSA>SKC for particle, Gillian>SKC>AMETEK for gas and Gillian>MSA>Casella for both combination, respectively. As a result, it was found that the personal air sampler manufactured by Gillian company was utilized the most in domestic work environment monitoring service provider regardless of types of personal air sampler. Conclusions: Based on the results obtained from this study, the normal operation rate according to types of personal air sampler was as follows: 94% for personal air sampler for collecting particle only, 93% for personal air sampler for collecting gas only and 89% for collecting both particle and gas. Overall, the numbers of personal air sampler possessed and operated normally in domestic work environment monitoring service provider were 5,458 and 5,062, which indicates the normal operation rate of personal air sampler in total aspect is 93%.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.11
• /
• pp.1554-1564
• /
• 2007

In apparel industry, the production of clothing for the global market, has it#s origin in its characteristics depending on hands on working style, according to the globalization of a fashion industry. These days, however, the globalized production is unable to keep pace with the short cycle of production due to the unpredictable change of the taste or demands in the local area, as a result, the industry has come to take a focus on the production and consumption in the circumscribed region. In this stream, the northeastern area, specially, Dalian which is renowned for a center of fashion was designated as a city of this study as a representative. The cultural, racial and geographical uniqueness, asks for the analysis, based on the individual local area on the part of Korean fashion company desiring to launch into China fashion market. The purpose of this thesis is to analyse the style, color, and items of street fashion in Dalian. I would contribute to the understanding the preference of fashion in northeastern area, thereby, affording a fundamental resources for designing strategies for Korean fashion brands in China. The period of investigation is about 5 weeks from 14 May 2006 until 18 June 2006, with combined use of camcorder and digital camera. The site was Victory Shopping Plaza, in center of city, also with Mycal, Ansung, Dasang department store situated in the Economic Development area. The result of this study are as follows: 1. Preferred clothing styles are casual styles(68%) rather than formal styles(32%). In the casual styles, sports casual(36.0%), character casual(29.5%), jean casual(2.6%) were listed. All kinds of clothes are tightly fitted due to the stretched fabric and knit fabric. 2. Preferred colors are white(31.1%), red(16.6%), black(15.8%) khaki(7.8%) and blue(7.6%) for tops, and black(34.6%), blue(27.2%), white(15.4%), brown(14.6%) for bottoms. 3. Preferred clothing items are T-shirt(36.5%), jumper(33.6%), jacket(20.0%), blouse(8.7%), etc.(1.2%) for tops, pants(91.4%), skirts(8.6%) for bottoms. In the pants, cigarette pants(34.6%), bell bottom pants(21.0%), cargo pants(19.9%), straight pants(15.9%) were listed respectively. In the skirts, flare skirt(3.9%), tight skirt(2.2%), semi tight skirt(1.7%), pleats skirt(0.8%) were listed.

• The Korean Journal of Food And Nutrition
• /
• v.2 no.1
• /
• pp.61-72
• /
• 1989

This study was conducted to gather the baseline data on realities of experimental-practice and opinions toward spot-practice, and to examine how to cope with the problems raised at the Department of Food and Nutrition of Junior Technical College in Korea. Questionnaires were gathered from 42 chairmans of the Department of Food and Nutrition and 140 Present dieticians worked in Seoul, Bucheon am Seongnam area. The results are as follows, First, as a whole, each college had 2~3 experimental laboratory (Lab), in which Cooking Science Lab. Chemistry Lab and Microbiology Lab were occurred at higher frequency as Lab's name. Second, the numbers per experimental-practice class were more than 40 at most colleges. 85% of Present dieticians have answered to feel too much numbers per the class during their college days, whereas professors' opinions toward the numbers per class were suitable at 20~30 persons per class. Third, professors' opinion toward the adquate ratio of the theory subject classes to experimental subject classes was suitable at 60 : 40. Dieticians answered to take the theory subject classes partly or mostly on behalf of the experimental-practice classes. Fourth, the main reasons which inhibited normal experimental-practice class were the class for emphasis on examination, the shortage of experiment budget, the excess of class members, the shortage of experimental Lab Also, this results showed same propensity to present dieticians' opinion toward the same question above. Fifth, among the experimenta1-practice subjects established at the Department of Food and Nutrition, Diet Therapy Lab was highest frequency class emphasized on theory followed by Nutrition Counselling Lab, Food Processing and Storage Lab, Food Hygiene Lab and Food Microbiology Lab in that order. Here, Basic Chemistry Lab, Biochemistry Lab, Food Microbiology Lab were pointed as subjects far from the present task of dieticians. Sixth, Department of Food and Nutrition, as a whole, has conferred with spot-practice arrangement About 50% (all who want to join spot-practice) of second year students took part in spot-practice. In the other way, all colleges except for 2 colleges didn't give the credit for the spot-practice system. Seventh, according to the on analysis on spot-practice places, manufacturing company was at highest frequcney followed by hospitals, elementary school having group feeding system in that order. Especially, 16.7% (5 colleges) of the total colleges sent the students to the research institute related to food industry for spot-practice experience. Eighth, Professors' opinions toward the spot-practice time and period were preferable on summer vacation of second year and for 1~2 weeks, respectively. On the contrary, 74 dieticians answered to the adquate period as for 4 weeks. Ninth, 86 dieticians of the total 140 answered to complete the spot-practice during their college days, which helps the present task of them. Lacks of spot-practice program, Lacks of comprehension of upper personals and lacks of group feeding equipments ranks higher as difficulties in spot-practice management.

• Journal of Digital Contents Society
• /
• v.16 no.3
• /
• pp.425-436
• /
• 2015

Along with the spotlight of storytelling, storydoing has attracted public's attention as it has been utilized in various different areas. There are valued message by producer and story to back it up in the storydoing. Recipient will acknowledge the affordance encouraged by producer and confirm the message by practicing it. Finally producer will evaluate the practice process. Therefore, storydoing promotes the product of company, strengthens the brand image and delivers message and value through a previously mentioned cycle. Ultimately, storydoing is operated based on user's experience. In this study, based on the experience theory of John Dewey, in order to discover how the interactivity and continuity operate story doing, we conducted a study on the concept of storydoing, the national and international story doing status, the difference between storytelling and storydoing, the elements of story doing, the relationship with user experience, and the principle of operating story doing. As a result, we learned that story doing had the five elements of message, story, characters, action, and confirmation, and operated by the interaction and continuity between the producer and receptor. Thus, through this research to understand the nature of storydoing, we have identified new trends of the cultural industries and discovered the possibilities to expand the application scope of storydoing, which was currently applied by companies to promote their brand images, onto contents field. More importantly, the proposal of theoretical differences between storytelling and storydoing makes this report meaningful in terms of sociocultural, industrial and academic aspect.

• Fire Science and Engineering
• /
• v.30 no.5
• /
• pp.1-8
• /
• 2016

Safety management in hazardous areas with potentially explosive gas atmospheres (here in after referred to as hazardous areas) in large scale facilities dealing with combustible or flammable materials at home and abroad is very important (significant) for the coexistence of the company and local society based on business continuity management (BCM) and reliance. For the safety management in hazardous areas, two systems are mainly used: (1) the control system for the prevention of combustible or flammable substances and (2) the explosion proof system for the elimination of ignition sources when flammable gases are leaked to inhibit the transition to fire or explosion accidents. While technology and regulations on explosion proof facilities or devices for electrical ignition sources are well developed and defined, those for thermal ignition sources need to be more developed and established. In this study, the internal combustion engine in hazardous areas was investigated to determine the risk of ignition. For this purpose, document searches were conducted on the relevant international standards and accidents cases and risk analysis reports. In addition, this study assessed the application cases of the diesel engine's safety equipment, such as spark arresters regarding the site of process safety management (PSM) system in central Korea. To practically apply these results to the hydrocarbon industry, the safety management method for explosion prevention in hazardous areas was provided by risk identification for ignition sources of internal combustion engines, such as diesel engines.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.37
• /
• pp.187-216
• /
• 2008

Risk regarding the possibility of loss can be especially problematic. If a loss is certain to occur, it may be planned for in advance and treated as a definite, known expense. It is when there is uncertainty about the occurrence of a loss that risk becomes an important problem. The word risk is often used in connection with insurance. No one generally accepted definition of risk exists, however. Of the many definitions, two distinctive ones are commonly used. One defines risk as the variation in possible outcomes of an event based on chance. That is, the greater the number of different outcomes that may occur, the greater the risk. Another way of expressing this concept is to state: The greater the variation around an average expected loss, the greater the risk. The second definition of risk is the uncertainty concerning a possible loss. The definition of risk as a useful one because it focuses attention on the degree of risk in given situations. The degree of risk is a measure of the accuracy with which the outcome of an event based on chance can be predicted. For now, it will serve our purpose to note the more accurate the prediction of the outcome of an event based on chance, the lower the degree of risk. After sources of risks are identified and measured, a decision can be made as to how the risk should be handled. A pure risk that is not identified does not disappear, the business merely loses the opportunity to consciously decide on the best technique for dealing with that risk. The process used to systematically manage risk exposures is known as risk management. Some persons use the term risk management only in connection with businesses, and often the term refers only to the management of pure risks. In this sense, the traditional risk management goal has been to minimize the cost of pure risk to the company. But as firms broaden the ways that they view and manage many different types of risk, the need for new terminology has become apparent. The terms integrated risk management and enterprise risk management reflect the intent to manage all forms of risk, regardless of type. International trade transaction is called between countries has features of globalism, cultural gap, long distance and long terms for the transaction. It is riskier than domestic transaction has its specific risks, such as foreign exchange risk and political risk, and requires various active risk management skills. Risks in relation to the international trade transaction are the contract risk, transit risk and payment risk, etc. The risk management in relation to the international trade transaction is to identify and measure these risks. The purpose of this study is to analyse the practical problems and its solution plan by analyzing various cases related to the risk management of bill of lading in the international trade transaction.