• 한국정밀공학회지
• /
• 제15권1호
• /
• pp.19-25
• /
• 1998

Remote fault diagnosis and maintenance system using general telecommunication network is necessary for an effective fault diagnosis and higher productivity of NC machine tools. In order to monitor machine tool condition and diagnose alarm states due to electrical and mechanical faults, a remote data communication system for monitoring of NC machine fault diagnosis and status is developed. The developed system consists of (1) remote communication module among NC's and host PC using PSTN. (2) 8 channels analog data sensing module, (3) digital I/O module for control or NC machine, (4) communication module between NC machine and remote data communication system via RS-232C, and (5) software man-machine interface. Diagnostic monitoring results generated through a successive type inference engine are displayed in user-friendly graphics. The validity and reliability of the developed system is verified to be a powerful commercial version on a vertical machining center through a series of experiments.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.708-713
• /
• 1997

A remote data communication system for monitoring of NC machine fault diagnosis and status is developed. This system communicates with host PC by using dial-up communication method on PSTN. The developed system consists of (1)remote communication module among NC's and host PC using PSTN, (2) 8 channels analog data sensing module, (3) digital I/O module for control of NC machine, (4) communication module between NC machine and remote data communication system using RS-232c, and (5) Software man-machine interface. This system may be applied for remote sensing of the status in Fms. To show the veridity of the developed system, several examples are illustrated.

• 한국정밀공학회지
• /
• 제20권10호
• /
• pp.89-97
• /
• 2003

The faults diagnosis of machine tool, which is controlled by CNC(Computer Numerical Control) and PLC(Programmable Logic Controller), is generally based on ladder diagram of PLC because sequential controls for CNC and servo motor are mostly processed in PLC. However, when fault is occurred, a searching of logical relationship for fault reasons is required a lot of diagnosis experiences and times because PLC program has step structure. In this paper, FDS(Fault Diagnosis System) is developed and implemented to machine tool with open architecture controller in order to find the reason of fault fast and correctly. The diagnosed reasons for fault are remote serviced on web through developed RSS(Remote Service System). The operationability and usefulness of developed system are evaluated on specially manufactured machine tool with open architecture CNC. The results of this research can be the model of remote monitoring and fault diagnosis system of machine tool with open architecture CNC.

• 전기학회논문지P
• /
• 제58권4호
• /
• pp.432-436
• /
• 2009

This paper is described that advanced study on network design of remote diagnosis system for power facilities of electric railway. In the field, it is very difficult for worker to diagnosis power facilities including catenary because workers should be maintenance on AC power supply. Therefore, to properly design on remote diagnosis system, we have searched the inside and outside of the country-related technology trends. Also we confirmed that required technologies to design interface technology required for the development of sensor devices and the USN network was designed in accordance with required skills. Throughout variety of requirements, we have development iRFS based ZA sensors and iRFM to receive data of sensor. Also CC2420 is applied as single-chip which used 2.4GHz IEEE802.15.4 compliant RF tranciver designed for low-power and low-voltage wireless applications for ZigBee communication.

• 한국정밀공학회지
• /
• 제16권9호
• /
• pp.75-81
• /
• 1999

In order to remain competitive, a manufacturing company needs to maintain the optimal condition of its manufacturing system. Machine tools as an important element of a manufacturing system consist of complex mechanical as well as electronic components. Therefore, diagnosing the troubles of machine tools is a tricky process which requires a lot of experience and knowledge. Since providing machine tool users with necessary services at the right time is very difficult and expensive, a remote diagnosis system is to be regarded as a good alternative, with which users can diagnose and fix the machine troubles. This paper presents a framework for a remote machine tools diagnosis system by combining the world wide web technology and backward reasoning expert system.

• 전기학회논문지P
• /
• 제60권2호
• /
• pp.94-98
• /
• 2011

Electrolytic power capacitors today form essential components for virtually any power electronic system such as DC/DC converter or UPS. Frequently, electrolytic capacitors for DC link voltage smoothing are the key components which determine the life cycle of the whole unit and often are responsible for converter breakdown failures. In this paper, ethernet-based remote diagnosis system for DC voltage smoothing capacitor using DSP control board is developed. To estimate the status of the capacitor, the equivalent series resistor(ESR) of the component has to be determined. The ESR detection scheme is based on the determination of the capacitor ripple power losses calculated from DC link voltage/current measurement. Experimental results show the veridity and reliability of the proposed ethernet-based remote on-line capacitor diagnosis system.

• 한국전기전자재료학회논문지
• /
• 제28권9호
• /
• pp.602-606
• /
• 2015

This paper presents a ZigBee wireless communication system for remote diagnosis in overhead distribution power lines. The system is divided in three parts in the functional aspect - a host computer module, a remote controller module and a diagnostic system module. The host computer module designed as USB interface transmits control signals and receive data measured by sensor. The remote controller module operates the diagnostic system. Diagnostic system module communicates with internal main controller and host computer USB. Multiple communication channel is adopted for simultaneous operations of several diagnostic system. Dedicated protocol for each module is developed. The system is designed with a focus on low cost and small size suitable for lightweight and small diagnostic system.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회(1)
• /
• pp.180-181
• /
• 2005

• 한국산학기술학회논문지
• /
• 제13권11호
• /
• pp.5442-5446
• /
• 2012

본 논문에서는 만성질환자 및 의료취약계층을 대상으로 지속적이고 체계적으로 건강상태를 체크하고 가장 최적의 환경을 지원하여 삶의 질을 향상시킬 수 있는 u-헬스케어용 원격진료서비스 시스템에 대한 것이다. u-헬스케어용 원격진료서비스 시스템은 무선을 통해 흉부에서 들리는 생체음을 측정하는데 이때 시스템에 사용하는 무선주파수에 대해 전자파의 적합성을 확인하고 의사와 환자에게 발생되는 전자파의 해에 대한 실험을 통해 u-헬스케어용 원격진료서비스 시스템이 진단시 의사와 환자 인체에 무해하다는 진단 환경을 제시한다.

• Journal of Biosystems Engineering
• /
• 제24권3호
• /
• pp.267-274
• /
• 1999

An internet and network based software and related interface have been developed, which can remotely control and manage an on-site operating system. Developed software modules were composed of two parts: monitoring/management modules and control/diagnosis modules were developed for the network status, warehouse, production and selling status. Modules of control with diagnosis were developed for the on-site operating system and interface. Each module was integrated and the whole modules have been tested with an automatic mushroom grading/sorting system which was built in a laboratory. Developed software modules worked successfully without any uncommon situations such as system down caused by the software or data transfer error. Each software module was developed independently in order to apply easily to other existing on-site systems such as rice processing centers, fruit and vegetable sorting, packaging and distribution centers scattered over the country.