• 대한조선학회논문집
• /
• 제50권6호
• /
• pp.436-449
• /
• 2013

In this paper, a numerical analysis is carried out to study the characteristics of supercavitating flows and the drag of relatively simple two-dimensional and axisymmetric bodies which can be used for supercavity generation device, cavitator, of a high-speed underwater vehicle. In order to investigate the suitability of numerical models, cavity flows around the hemispherical head form and two-dimensional wedge are calculated with combinations of three turbulence models(standard $k-{\epsilon}$, realizable $k-{\epsilon}$, Reynolds stress) and two cavitation models(Schnerr-Sauer, Zwart-Gerber-Belamri). From the results, it is confirmed that the calculated cavity flow is more affected by the turbulence model than the cavitation model. For the calculation of steady state cavity flows, the convergence in case of the realizable $k-{\epsilon}$ model is better than the other turbulence models. The numerical result of the Schnerr-Sauer cavitation model is changed less by turbulence model and more robust than the Zwart-Gerber-Belamri model. Thus the realizable $k-{\epsilon}$ turbulence model and the Schnerr-Sauer cavitation model are applied to calculate supercavitating flows around disks, two dimensional $10^{\circ}$ and $30^{\circ}$ wedges. In case of the disk, the cavitation number dependences of the cavity size and the drag coefficient predicted are similar to either experimental data or Reichardt's semi-empirical equations, but the drag coefficient is overestimated about 3% higher than the Reichardt's equation. In case of the wedges, the cavitation number dependences of the cavity size are similar to experimental data and Newman's linear theory, and the agreement of the cavity length predicted and Newman's linear theory becomes better as decreasing cavitation number. However, the drag coefficients of wedges agree more with experimental data than those of Newman's analytic solution. The cavitation number dependences of the drag coefficients of both the disk and the wedge appear linear and simple formula for estimating the drag of supercavitating disks and wedges are suggested. Consequently, the CFD scheme of this study can be applied for numerical analysis of supercavitating flows of the cavitator and the cavitator design.

• International Journal of Control, Automation, and Systems
• /
• 제5권4호
• /
• pp.471-478
• /
• 2007

In this paper, an optimal Wiener-Hopf decoupling controller formula is obtained which is expressed in terms of rational matrices, thereby readily allowing the use of state-space algorithms. To this end, the characterization formula for the class of all realizable decoupling controller is formulated in terms of rational functions. The class of all stabilizing and decoupling controllers is parametrized via the free diagonal matrices and the optimal decoupling controller is determined from these free matrices.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.318-323
• /
• 1993

The paper discusses the problem of computing coarser observation functions in supervisory control of discrete event systems. It is shown that when a supervisor that realizes a given language L has certain properties, L-realizability of a coarser observation function is equivalent to control-compatibility of the states in some subsets of the state space of the supervisor. This characterization is then used to devise an iterative procedure of computing coarser L-realizable observation functions, where supervisor reduction and L-realizability verification of an observation function are performed at each iteration.

• 대한전자공학회논문지
• /
• 제27권5호
• /
• pp.690-698
• /
• 1990

Among the target identification algorithms presented up to now, the NNR algorithm utilize multifrequency and single observation method. But it is generally known that its implementation is extremely difficult. In this paper a new identification algorithm using the single frequency and cumulative observation method was proposed. The simulation result shows that the proposed algorithm with 31 observation and accumulation is more effective and realizable than the NNR with 3 freqnencies when the noise level n is below 0.3.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.476-481
• /
• 1991

This paper investigates the relationship between the two problems, supervisor reduction and observation function (projection) design, which arise in supervisory control of DEDS. It is shown through an example that a reduced supervisor of minimal size does not necessarily result in a maximal projection when a projection design method which uses the transition structure of a supervisor is applied. Also, if an L-realizable projection P is available and if a supervisor has a special structural feature, a cover C for supervisor reduction can be easily obtained. By investigating the control-compatibility of states of the reduced supervisor based on C, we can also check maximality of P in a simple manner.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.1139-1144
• /
• 1990

In this paper, we consider linear periodic discrete-time control systems under periodic compensation. Such a closed-loop system generally represents a periodic time-varying system. We examine the problem of finding a compensator such that the closed-loop system is realized as LTI model (if possible) with the closed-loop stability being satisfied. We present a necessary and sufficient condition for solving such problem and also give the characterization of realizable LTI models.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.570-573
• /
• 2000

A control law for a SCARA robot manipulator is designed using recursive torque methods. This scheme uses previous torques and error dynamics to generate torque controls at the present time and adopts relatively simple numerical and control algorithms that can be easily realizable. In order to evaluate the performance and robustness of the suggested control system, the 2-link SCARA robot manipulator is practically implemented using a dSPACE interface. It is found that the recursive controller has a good tracking performance in spite of the presence of payload disturbances.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.523-528
• /
• 1990

This paper discusses the problem of designing an observation function as coarsest as possible in supervisory control of discrete event dynamic systems. Some algebraic properties of two sets consisting of observation functions for which the given desirable behavior is realizable are investigated:these sets with a partial ordering turn out not to possess largest elements. Two natural methods of obtaining an observation function, which is frequently coarser than the identity mapping, are also presented. An example illustrates the use of these methods.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.818-823
• /
• 1998

A three-arm PWM UPS is realizable low price and small size UPS. In this UPS configuration, the center arm operates in both PWM converter mode and PWM inverter mode. Therefore, the operation of this UPS differs from the conventional UPS. In this paper, the three-arm PWM UPS is analyzed and a trial product is realized.

• 전기의세계
• /
• 제20권4호
• /
• pp.12-16
• /
• 1971

The electrical detector and computer systems for traffic flow and speed measurement are demonstrated in this paper. For the best traffic control optimization, linear and non-linear equations in the transition state are dealing with the perturbation of the linear car-following. In the conclusions, we construct a realizable system for the central automatic traffic control with a computer. Furthermore, fixed periodic switching system by manual with the automatic traffic control system is recommended for emergency perturbation.