• The Transactions of the Korea Information Processing Society
• /
• v.3 no.4
• /
• pp.877-882
• /
• 1996

The effects of periodic and chaotic behaviour in the Bonhoeffer-Van der Pol (BVP) oscillation of the nerve membrane driven by a periodic stimulating current A1 coswtare investigated through hardware implementation.For hardware implementation of the BVP model. real element values were escaled with computer simulation results to determine the parameter real value.As the parameter A1 varied in the range 0 to 1.3, the BVP model showed an ordinary and reversed period-doubling cascade and a chaotic state. At the low driving amplitude ofa1 the period-doubling showed and at the high driving amplitude of A1 the chaotic state occured. To analyse the BVP model for chaotic behaviour Phase Plane, Time series are used to verify that properties.

• Journal of Applied Reliability
• /
• v.15 no.3
• /
• pp.139-144
• /
• 2015

Track drive unit adopted in the small sized excavator generally have been used in the construction equipment under the 10 tons as the driving device with forwarding and reversing of excavator. It is required to study the accelerated life test applied by over torque and speed to test the durability life test reflected the many driving modes of small sized excavator and also need to equip the comprehensive performance and life test equipments to do the various performance tests. This study had analyzed the failure modes of the components, and calculated the equivalent loads investigated the used loads in the real field conditions and elicits the acceleration factor adopted in the inverse power model. Also, this study have considered the changes of the acceleration factor and the durability test time in the case of the rotary group and the bearing through analyzing the main failure modes. It was calculated the no failure test time about 2 samples and confidence level 90% and elicited the accelerated life time 720 hours.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.18 no.4
• /
• pp.23-30
• /
• 2022

Recently, traffic congestion and environmental pollution have occurred due to population concentration and vehicle increase in large cities. Various studies are being conducted to solve these problems. Most of the traffic congestion in cities is caused by traffic signals at intersections. This paper proposes a dynamic traffic light control (DTLC) scheme to support safe vehicle operation and smooth traffic flow using real-time traffic information based on VANET. DTLC receives instantaneous speed and directional information of each vehicle through road side units (RSUs) to obtain the density and average speed of vehicles for each direction. RSUs deliver this information to traffic light controllers (TLCs), which utilize it to dynamically control traffic lights at intersections. To demonstrate the validity of DTLC, simulations were performed on average driving speed and average waiting time using the ns-2 simulator. Simulation results show that DTLC can provide smooth traffic flow by increasing average driving speed at dense intersections and reducing average waiting time.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.11
• /
• pp.159-167
• /
• 2009

The vehicles play a significant role in modern people's life as economy grows. The development of car navigation system(CNS) provides various convenience because it shows the driver where they are and how to get to the destination from the point of source. However, the existing map-based CNS does not consider any environments such as traffic congestion. Given the same starting point and destination, the system always provides the same route and the required time. This paper proposes a path planning method with traffic prediction by applying historical driving information to the Fuzzy theory and Bayesian update. Fuzzy theory classifies the historical driving information into groups of leaving time and speed rate, and the traffic condition of each time zone is calculated by Bayesian update. An ellipse area including starting and destination points is restricted in order to reduce the calculation time. The accuracy and practicality of the proposed scheme are verified by several experiments and comparisons with real navigation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.224-226
• /
• 2016

With the technical development and rapid increase of private demand, the new market for unmanned vehicle combined with the characteristics of 'unmanned automation' and 'vehicle' is rapidly growing. Even though the pilot driving is currently allowed in some countries, there is no country that has institutionalized the formal driving of self-driving cars. In case of the existing vehicles, safety incidents are frequently happening due to the frequent malfunction of the rear sensor, blind spot of the rear camera, or drivers' carelessness. Once such minor flaws are complemented, the relevant regulations for the commercialization of self-driving car and small drone could be relieved. Contrary to the ultrasonic and laser sensors used for the existing vehicles, this paper aims to attempt the distance measurement by using the depth sensor. A depth camera calculates the distance data based on the TOF method calculating the time difference by lighting laser or infrared light onto an object or area and then receiving the beam coming back. As this camera can obtain the depth data in the pixel unit of CCD camera, it can be used for collecting depth data in real-time. This paper suggests to solve problems mentioned above by using depth data in real-time and also to design the obstacle avoidance system through distance measurement.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.9
• /
• pp.1422-1428
• /
• 2004

In this paper, computer simulation model of handrail band including pulley-driving system is developed to calculate handrail slippage. This handrail simulation model is validated with test result within operating range and used to predict its slippage behavior with respect to variation of 4 different design parameters considering the applicability into the real handrail system. Based upon this parameter study, optimal condition for handrail slippage improvement is proposed without time-consuming and costly experiments of the real handrail system. And then performance improvement of handrail slippage complied with safety code is achieved after applying the optimal condition into the real handrail band system.

• Journal of Korean Society of Transportation
• /
• v.26 no.1
• /
• pp.155-164
• /
• 2008

Variable Message Signs (VMS) is one of the major components for Intelligent Transport Systems (ITS) services that provides real-time traffic and incident information to drivers. The objective of this research was to develop a method determining the optimal location of VMS considering safety and driving characteristics of various drivers. A driving simulator was utilized to evaluate how drivers can safely exit to off-ramp depending on various VMS locations while information relating route diversion was provided. The binary logistic regression and factor analysis were applied in developing a probability model that predicts the success of safe off-ramp exiting. Based on the developed probability model, a method to estimate the spacing between VMS and off-ramp is suggested. It is expected that the products of this study would be utilized as a tool in determining VMS locations for ITS planners and designers.

• Journal of Korean Society for Geospatial Information Science
• /
• v.25 no.2
• /
• pp.39-47
• /
• 2017

Although motorcycle safety studies to date have identified the causes of motorcycle accidents in general, very few have investigated postal motorcycle accidents by studying the delivery postmen's specific work environment. To better understand postal motorcyclists' driving behavior associated with their delivery workload, we developed a system using V-World platform which visualizes driving behavior in real time along the driver's delivery route throughout an entire work day. We conducted a field test to examine the feasibility of our system by involving six delivery postmen currently working in Songpa, Seocheongju, and Gangseo, respectively. To show the potential of our system for nationwide comparison of postal motorcyclists' driving behavior and their workloads, we present several sample analyses using the collected field data. Although ideally, postmen's workloads should be standardized nationwide, we found large variation depending on regional characteristics of work area which affects postmen's driving behavior.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.5 no.4
• /
• pp.75-85
• /
• 2002

The introduction of GPS technique in transportation study make real time tracking of driving vehicle's position possible. Position information data gauged with three dimension(X, Y, Z) can be achieved with time-continuity and from more than two driving vehicles. For this field of study, in past day, there were many difficulties in collecting real time data, but now, it becomes easy thanks to this. But for the resonable result analysis, fully understanding of GPS data-accuracy must be proceeded. Because accompanied magnitude of error depends on the study's accuracy. For this reason, this study surveyed the GPS data's error and suggest calibrate technique. This study's result will be helpful for following studies using DGPS data. For this, this study takes two types study in road, and set triangulation coordinates, and compare it with GPS data. DGPS data contains less than 0.6m's error.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.7
• /
• pp.977-985
• /
• 2021

The LiDAR sensor is attracting attention as a key sensor for autonomous driving vehicle. LiDAR sensor provides measured three-dimensional lengths within range using LASER. However, as much data is provided to the external system, it is difficult to process such data in an external system or processor of the vehicle. To resolve these issues, we develop integrated processing system for LiDAR sensor. The system is configured that client receives data from LiDAR sensor and processes data, server gathers data from clients and transmits integrated data in real-time. The test was carried out to ensure real-time processing of the system by changing the data acquisition, processing method and process driving method of process. As a result of the experiment, when receiving data from four LiDAR sensors, client and server process was operated using background or multi-core processing, the system response time of each client was about 13.2 ms and the server was about 12.6 ms.