• 한국주조공학회지
• /
• 제20권5호
• /
• pp.330-335
• /
• 2000

Functional metal prototypes are often required in numerous industrial applications. These components are typically needed in the early stage of a project to determine form, fit and function. Recent R/P(Rapid Prototyping) part are made of soft materials such as plastics, wax, paper, these master models cannot be employed durable test in real harsh working environment. Parts by direct metal rapid tooling method, such as laser sintering, by now are hard to get net shape, pores of the green parts of powder casting method must be infiltrated to get proper strength as tool, and new type of 3D direct tooling system combining fabrication welding arc and cutting process is reported. But a system which can build directly 3D parts of high performance functional material as metal park would get long period of system development, massive investment and other serious obstacles, such as patent. In this paper, through the rapid tooling process as silicon rubber molding using R/P master model, and fabricate wax pattern in that silicon rubber mold using vacuum casting method, then we translated the wax patterns to numerous metal tool prototypes by new investment casting process combined conventional investment casting with rapid prototyping & rapid tooling process. With this wax-injection-mold-free investment casting, we developed new investment casting process of fabricating numerous functional metal prototypes from one master model, combined 3-D CAD, R/P and conventional investment casting and tried to expect net shape measuring total dimension shrinkage from R/P pare to metal part.

• 한국재료학회지
• /
• 제26권4호
• /
• pp.216-221
• /
• 2016

A sintering process for copper based films using a rapid thermal process with infrared lamps is proposed to improve the electrical properties. Compared with films produced by conventional thermal sintering, the microstructure of the copper based films contained fewer internal and interfacial pores and larger grains after the rapid thermal process. This high-density microstructure is due to the high heating rate, which causes the abrupt decomposition of the organic shell at higher temperatures than is the case for the low heating rate; the high heating rate also induces densification of the copper based films. In order to confirm the effect of the rapid thermal process on copper nanoink, copper based films were prepared under varying of conditions such as the sintering temperature, time, and heating rate. As a result, the resistivity of the copper based films showed no significant changes at high temperature ($300^{\circ}C$) according to the sintering conditions. On the other hand, at low temperatures, the resistivity of the copper based films depended on the heating rate of the rapid thermal process.

• 한국정밀공학회지
• /
• 제16권6호
• /
• pp.52-57
• /
• 1999

Funtional metal prototypes are often required in numerous industrial applications. These components are typically needed in the early stage of a project to determine form, fit and function. Recent R/P(Rapid Prototyping) part are made of soft materials such as plastics, wax, paper, these master models cannot be employed durable test in real harsh working environment. Parts by direct metal rapid tooling method, such as laser sintering, by now are hard to get net shape, pores of the green parts of powder casting method must be infiltrated to get proper strength as tool, and new type of 3D direct tooling system combining fabrication welding arc and cutting process is reported by song etc. But a system which can build directly 3D parts of high performance functional material as metal part would need long period of system development, massive investment and other serious obstacles, such as patent. In this paper, through the rapid tooling process as silicon rubber molding using R/P master model, and fabricate wax pattern in that silicon rubber mold using vacuum casting method, then we tranlsated the wax patterns to numerous metal prototypes by new investment casting process combined conventional investment casting with rapid pototyping & rapid tooling process. with this wax-injection-mold-free investment casting, we developed new investment casting process of fabricating numerous functional metal prototypes from one master model, combined 3-D CAD, R/P and conventional investment casting and tried to expect net shape measuring total dimension shrinkage from R/P part to metal part.

• 한국환경성돌연변이발암원학회:학술대회논문집
• /
• 한국환경성돌연변이발암원학회 2004년도 춘계학술대회
• /
• pp.84-84
• /
• 2004

• 한국작물학회지
• /
• 제38권1호
• /
• pp.66-71
• /
• 1993

자동분석기(Rapid Ftow Autoanalyzer) RF A-300을 이용한 쌀의 아밀로스 분석법을 확립하였다. 자동분석기로 분석한 아밀로스 함량을 Williams나 Juliano 등의 방법에 따른 분석결과와 비교하여 본 결과 매우 높은 직선적인 상관관계 (r=0.95$^{**}$-0.97$^{**}$)를 나타내었다. 자동분석기를 이용한 분석법으로 얻어진 아밀로스함량은 Juliano등의 분석법에 의해 얻어진 결과에 비해 저ㆍ중 아밀로스 품종에서는 1.0-2.0%가 높게, 고 아밀로스품종에서는 1%정도 낮게 측정된 반면 Williams등의 분석법에 따른 검정결과에 비해서는 2.0-5.0% 정도로 높은 함량을 나타내었는데 검정치가 저 아밀로스품종 쪽일수록 증가정도가 약간 큰 경향이었다. 세가지 분석방법간에 상호 직선적인 상관을 보이면서 쌀가루에 비해 녹말시료에서 아밀로스함량이 약간 높은 경향이었다.

• 서비스연구
• /
• 제2권2호
• /
• pp.1-21
• /
• 2012

e-R&D 활동이란 가상공간에서 인터넷 등의 네트워크나 컴퓨터 소프트웨어를 이용하여 R&D 활동을 전개해 나가는 것을 의미한다. 최근 빠른 속도의 기술변화와 다양해진 고객의 수요로 인해 기업은 생산성 향상의 문제에 직면하면서 e-R&D 필요성을 절감하고 있다. 본 논문에서는 e-R&D의 동향, 적용 사례 및 e-R&D 활성화를 위한 전략적 시사점을 살펴보고, 이를 통하여 미래기업의 e-R&D 모델과 디지털산업 육성 및 기술경쟁력 확보를 위한 e-R&D 정책을 제시하였다.

• International Journal of Concrete Structures and Materials
• /
• 제5권2호
• /
• pp.133-137
• /
• 2011

In this study, a physical and chemical properties analysis was conducted for PCSP to evaluate properties of its materials and, for comparison purpose, was also conducted for CSP. The result of experiment confirmed improvement of iron recovery rate due to introduction of rapid water-cooling equipment and greater density of exterior and interior structure through SEM observation and porosity measurement. Also, SEM, XRD and DSC-TGA analysis showed that content of f-CaO in PCSP was minuscule so it was decided that problems of material stability including f-CaO-caused bulging failure, which has been problematic, can be solved.

• Preventive Nutrition and Food Science
• /
• 제18권1호
• /
• pp.67-75
• /
• 2013

Descriptive analysis and consumer acceptance tests were conducted with frozen (FCR), homemade (HCR), and aseptic-packaged (ACR) cooked rice products from two cultivars-IM and SD. FCR was prepared using a rapid freezing process, which may provide consumers with a quality similar to that of HCR. The intensity of the flavors of roasted, glutinous rice, rice cake, and rice starch and the textures of glutinousness, moistness, chunkiness, adhesiveness, and squishiness were all greater in the FCR as compared to the HCR and ACR (p<0.05) in IM and SD cultivars. The differences in sensory characteristics between the FCR and ACR were larger than the equivalent differences between the FCR and HCR. Overall consumer acceptance ratings for FCR in overall aspect, appearance, aroma, and texture were not significantly different compared to those for HCR (p>0.05); however, in most cases these factors showed significant differences when compared with ACR (p<0.05). From partial least square regression analysis, cooked rice was positively related to sweet, transparency, glossiness, roasted, glutinousness, chunkiness, moistness, glutinous rice, adhesiveness, rice shape, rice starch, and squishiness attributes but negatively related to raw rice, old rice, old rice aroma, a particle feeling, off-aroma, white color, scatteredness, slickness, size of cooked rice, and firmness attributes.

• 한국분말재료학회지
• /
• 제26권6호
• /
• pp.528-538
• /
• 2019

The transition from "More-of-Less" markets (economies of scale) to "Less-of-More" markets (economies of scope) is supported by advances of disruptive manufacturing and reconfigurable-supply-chain management technologies. With the prevalence of cyber-physical manufacturing systems, additive manufacturing technology is of great impact on industry, the economy, and society. Traditionally, backbone structures are built via bottom-up manufacturing with either pre-fabricated building blocks such as bricks or with layer-by-layer concrete casting such as climbing form-work casting. In both cases, the design selection is limited by form-work design and cost. Accordingly, the tool-less building of architecture with high design freedom is attractive. In the present study, we review the technological trends of additive manufacturing for construction-scale additive manufacturing in particular. The rapid tooling of patterns or molds and rapid manufacturing of construction parts or whole structures is extensively explored through uncertainties from technology. The future regulation still has drawbacks in the adoption of additive manufacturing in construction industries.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.533-536
• /
• 2006

VIATRON TECHNOLOGIES has developed Field-Enhanced Rapid Thermal Processor (FERTP) system that enables LTPS LCD and AMOLED manufacturers to produce poly-Si films at low cost, high throughput, and high yield. The FE-RTP allows the diverse process options including crystallization, thermal oxidation of gate oxides and fast pre-compactions. The process and equipment compatibility with a-Si TFT lines is able to provide a viable solution to produce poly-Si TFTs using a-Si TFT lines.