• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.1
• /
• pp.137-153
• /
• 2019

Estimating tunnel construction time and costs are the most fundamental part of a tunnel project planning, which has been generally assessed on a deterministic basis until now. In this paper, excavation cycle time was investigated for two road tunnels and one subway tunnel, and the results were compared with the Standard of Construction Estimate (SE), which is made for the estimation of construction time and cost in a design stage. The results show that the difference in cycle time between SE and actual cycle time is 50%, 7% and 31% respectively for the three tunnels, which means that SE does not reflect practical operation time. The major reasons of the difference are skilled level of tunneling workers, the change of operation sequences for more effective operations, much more complicated working atmosphere in a tunnel than the assumption of SE etc. Finally, even though the results can not be generalized since investigated tunnels are only 3, but it is thought that SE needs to be upgraded into the model able to consider quite common situations through additional tunnel investigation and studies in the future.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.1
• /
• pp.177-188
• /
• 2019

The purpose of the optimization of the installation of supply/exhaust ports for tunnels with transverse ventilation system is to supply fresh air from outside to inside of tunnels uniformly and exhaust pollutant from tunnels properly for creating safe and clean environment for tunnel users. For this purpose, a ventilation port area optimization program was developed to obtain a uniform supply or exhaust air volume inside a great depth double deck tunnel with transverse ventilation system. In order to area optimize the developed port sizing program, the wind velocity was measured in the duct of the currently operated tunnel with semi-transverse ventilation. Also 3D cfd was performed on the same tunnel and cfd results were compared to the measured value. As a result, the error rate between the predicted value from the program and measured value was 6.72%, while the error rate between the predicted value from the program and 3D cfd analysis value was 4.86%. Both of comparison results show less than 10% of error rate. Thus It is expected that supply/exhaust port optimization design of transverse ventilation tunnel can be possible with using this large exhaust port area optimization program.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.272-278
• /
• 2018

Traffic volume has been greatly increasing due to urban development and the improvement of living standards, and many complaints are being raised due to the increasing road noise. As a countermeasure against these problems, highly soundproof walls are installed on the sides of roads. However, the ability to bear wind loads is a major design requirement for soundproof walls, which contributes to the exponential increases in construction costs and restricts the height of the walls. The aim of this study is to improve the performance of soundproof walls and to dramatically reduce wind loads while maintaining excellent price competitiveness. Based on Helmholz's resonator theory, a new concept is proposed for a ventilation-type soundproofing plate that can pass through a fluid like air and reduce noise. A full-scale metal soundproofing plate was produced to satisfy the quality standards of highways by conducting a sound-pressure transmission-loss test, wind tunnel test, and material quality test. To verify the reliability, the wall was manufactured and installed, and the sound insulation effect was examined by measuring the noise over time. In the future, ventilated soundproof walls on roads could create a pleasant living environment due to the high noise-insulation effect.

• Journal of the Korean GEO-environmental Society
• /
• v.20 no.3
• /
• pp.21-30
• /
• 2019

Composite pile, which is composed of the steel pipe pile in which the large horizontal force acts and the PHC pile in which the small horizontal force acts by a special connecting devices, is being commercialized as a base material for civil engineering structures. The core of such a composite pile can be said to be a design criterion for estimating the joint position and stability of the connection device between steel pipe pile and PHC pile. In Korea, there is no precise specification for the location of composite pile joints. In the LH Design Department (Korea Land & Housing Corporation, 2009), "Application of composite pile design and review of design book marking" was made with reference to Road Design Practice Volume 3 (Korea Expressway Corporation, 2001). this is used as a basis of the design of the composite pile. It can not be regarded as a section change of the composite pile, so it has a limitation in application. Therefore, In this study, we propose a design criterion for the location of the section of the composite pile (joint of steel pipe pile and PHC pile) and evaluate the stability and economical efficiency of it by using experimental method and analytical method. Analysis of composite pile design data installed in 79 domestic bridges abutment showed that the stresses, bending moments, and displacements acting on the pile body and connection of the pile were analyzed. Through the redesign process, it was confirmed that the stresses generated in the connecting device occur within the allowable stress values of the connecting device and the PHC pile. In conclusion, the design proposal of composite pile joint location through empirical case study in this study is an improved design method considering both stability and economical efficiency in designing composite pile.

• Journal of Practical Engineering Education
• /
• v.10 no.1
• /
• pp.73-79
• /
• 2018

The purpose of this study is to explore the supporting scenario to promote vocational training in North Korea in terms of cooperation level. To this end, we have embarked on a regional and industry based vocational training program by predicting the political and social situation of North Korea and staging three scenarios systematically. These scenarios were designed originally based on the Futures Group methodology. The first scenario is to establish a technical training center in one area, focusing on the electrical, electronics, and clothing sectors. The second scenario is to set up a pilot campus of vocational training college in one region by selecting the electric, electronic, and automobile industries as its main industries. The third scenario is to establish five vocational training college campuses in North Korea, focusing on electricity and electronics, IT manufacturing, telecommunications, heavy industry, and women-specialized industries. We suggested the followings: First, establishing goals and strategies for North Korean vocational training and establishing road maps. Second, the North Korean vocational training governance system needs to be established. Third, R & D infrastructure for vocational training needs to be established. Fourth, HRD and HRM system in North Korea vocational training field needs to be established. In addition, the role of public and private employment services centers to provide them should be strengthening.

• Journal of Convergence for Information Technology
• /
• v.9 no.6
• /
• pp.153-163
• /
• 2019

The purpose of this study is to research the effect of life satisfaction on young people at an early age and the impact of media on behavioral aggressiveness during this process. To this end, a group of primary schools located in Jiangnan and Jiangbei in the Seoul area and the Nanjing Road in the city were selected and 290 early youths from grades 4-6 of elementary school were chosen as specimens of structural equations. The results indicate that firstly, the personal causes of early youth have a positive (+) effect on the self-esteem life satisfaction and negative (-) impact on liquidity aggressiveness. Secondly, depression has a negative impact on life satisfaction, while action aggressiveness has no effect. Thirdly, the mobility aggression of early youth has a negative impact on life satisfaction (-), and there is a partial media relationship between self-esteem and life satisfaction. However, there is no media relationship between depression and life satisfaction. Based on the above research results, the project of improving youth early life satisfaction and reducing mobile aggression was proposed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.7
• /
• pp.474-484
• /
• 2019

In this age, where the social environment is changing rapidly and unpredictably, interest in safety from crime is increasing in Korean society. As the desire to live a life free from the fear of crime increases, interest in the construction of safe cities is also rising nationwide. To meet the national demand, the Korean government is promoting a project to link public disaster safety systems by involving municipalities, 112, 119, and other emergency services and institutions through the Smart City Integrated Platform in order to construct a smart safety net. This study investigates the linking of theSmart City Integrated Platform and theIntelligent Security Project. The results are as follows. 1. The linkage's objective is clear. 2. The system sector can provide information to accident-related organizations. 3. The scenario area can be expanded to a crime-prevention sector, and a long-term urban information integration infrastructure can be created. 4. Product testing is enabled by a smart city road map and through continuous consultation with relevant organizations. 5. Project diffusion to other local governments can be promoted with the continued addition of commercial products.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.2
• /
• pp.135-141
• /
• 2019

Internet of thing becomes more active, many sensor devices are increasing. Sensors can use network wired network or use mobile communication network. From the viewpoint of the transmission rate, the mobile communication network can be roughly divided into two types of high-speed communication and low-speed communication. In the case of hundreds of millions of sensors in the mobile communication network, resources are wasted to use high-speed communication. Communication is required to reduce the transmission rate and appropriately allocate resources without wasting such resources. As the Internet of Thing has been activated, Narrowband Internet of Thing(NB-IoT), which is one of the low-power technologies in recent mobile communications, is in the spotlight from various companies. Currently, it can be seen that only NB-IoT or other low power consumption communication has the potential to be able to connect to the Internet with rapidly increasing sensor devices. In this paper, we designed and implemented a heater controller using Huawei NB-IoT communication Module, a server that collects controller information, and an application that allows default settings for devices. The main function of this system is to collect temperature and heater status and give it to the server, control the heater from the server, and set parameters for the heater to operate automatically. The system can be applied to places where wired communication is not established, such as road information, smart agriculture, and small reservoirs as well as heaters.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.36 no.4
• /
• pp.80-93
• /
• 2018

The following results could be obtained from the research on awareness and satisfaction of the tourists who joined the program 'A Journey in Search of King Mu's Road'. With regard to awareness of the site tour program, tourists replied that they participated in the program mainly because of their interest in education for their children. They expressed great needs for the municipal government office to maintain walkways, signboards and guide maps as well as to reinforce safety facilities as a measure to increase satisfaction with the site tour on the part of visitors and tourists. In terms of satisfaction with operation and management of the site tour program, the contents of the program were highly appreciated while it turned out necessary to rediscover garden culture resources and to develop and operate an expanded internal tour course for tourists to look around inside the relics by utilizing the recently excavated Baekje historical resources. As a consequence, it might be expected possible to experience and educate the local history and garden culture thanks to the historical culture and environmental values that have been preserved in the Baekje cultural circles. Moreover, the importance of walking trips will be recognized for its effects to allow those who get tired from daily life to come into contact with nature, practice self-reflection and care for their health as well.

• Journal of Forest and Environmental Science
• /
• v.34 no.6
• /
• pp.461-471
• /
• 2018

In this study, the deforestation and forest degradation areas have been obtained in Myanmar using a land cover lamp (LCM) and a tree cover map (TCM) to get the $CO_2$ potential reduction and the strength of occurrence was evaluated by using the geostatistical technique. By applying a multiple criteria decision-making method to the regions having high strength of occurrence for the $CO_2$ potential reduction for the deforestation and forest degradation areas, the priority was selected for candidate lands for REDD+ project. The areas of deforestation and forest degradation were 609,690ha and 43,515ha each from 2010 to 2015. By township, Mong Kung had the highest among the area of deforestation with 3,069ha while Thlangtlang had the highest in the area of forest degradation with 9,213 ha. The number of $CO_2$ potential reduction hotspot areas among the deforestation areas was 15, taking up the $CO_2$ potential reduction of 192,000 ton in average, which is 6 times higher than that of all target areas. Especially, the township of Hsipaw inside the Shan region had a $CO_2$ potential reduction of about 772,000 tons, the largest reduction potential among the hotpot areas. There were many $CO_2$ potential reduction hot spot areas among the forest degradation area in the eastern part of the target region and has the $CO_2$ potential reduction of 1,164,000 tons, which was 27 times higher than that of the total area. AHP importance analysis showed that the topographic characteristic was 0.41 (0.40 for height from surface, 0.29 for the slope and 0.31 for the distance from water area) while the geographical characteristic was 0.59 (0.56 for the distance from road, 0.56 for the distance from settlement area and 0.19 for the distance from Capital). Yawunghwe, Kalaw, and Hsi Hseng were selected as the preferred locations for the REDD+ candidate region for the deforestation area while Einme, Tiddim, and Falam were selected as the preferred locations for the forest degradation area.