• Proceedings of the Korean Information Science Society Conference
• /
• 2000.04a
• /
• pp.466-468
• /
• 2000

ARM 프로세서는 CISC 보다는 간단하게 디자인된 RISC로서 내장 응용프로그램에 적합하기 때문에 앞으로 모든 디지털 기기에 ARM 코어를 기반으로 한 핵심 칩들이 생산된다. 그러나 명령어가 CISC보다는 적기 때문에 주어진 작업에 대해 완전한 처리를 위해서는 보다 많은 명령어들을 필요로 한다. 이러한 ARM 프로세서에서 데이터를 전송할 때 사용하는 메모리 영역과 레지스터들을 프로그램과 함께 분석하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1565-1567
• /
• 2004

Various defects are found in FPD (Flat Panel Display) manufacturing process. So detecting these defects early and reprocessing them is an important factor that reduces the cost of production. In this paper, the bare glass inspection system for the FPD which is the early process inspection system in the FPD manufacturing process is designed and implemented using the high performance and accuracy CCD line scan camera. For the preprocessing of the high speed line image data, the Image Processing Part (IPP) is designed and implemented using high performance DSP (Digital signal Processor), FIFO (First in First out), FPGA (Field Programmable Gate Array) and the Data Management and System Control part are implemented using ARM (Advanced RISC Machine) processor to control many IPP and cameras and to provide remote users with processed data. For evaluating implemented system, experiment environment which has an area camera for reviewing and moving shelf is made.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.396-399
• /
• 1999

In this paper, the efficient HW/SW co-simulation method which selects the ISA model dynamically is proposed. Because the ISA models with only fixed accuracy have been used in previous co-simulation environment, it may result in bad performance in speed or accuracy. In the proposed method, the cycle accurate ISA model is used in the case that the states of the detailed system are to be inspected. In other case, instruction-based model is executed in order to accelerate the simulation speed. The proposed dynamic model selection can be done by setting the conversion point in the application code before the simulation starts. The experiment on the embedded RISC processor have been performed, and its result shows that the proposed method is more efficient than the case of using fixed ISA model.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.6
• /
• pp.11-17
• /
• 2001

Design and implementation of the MAC protocol processor prototype for high speed wireless LAN, which has interface with 5GHz OFDM PHY layer, is presented. We analyze the IEEE 802.11 MAC protocol specification and then separate the MAC protocol functions to be implemented by hardware and firmware and define the interface in which frames can be exchanged. That is, it is considered that high speed queue processing and interfaces with RISC processor and OFDM PHY layer. Protocol control and transmission/reception functions of the MAC functions are implemented in hardware in order to guarantee high speed processing in MAC layer. The developed MAC hardware block operates at 10MHz main clock. Therefore, transmission rate in PHY layer is about 80Mbps because data transmission/reception between MAC layer and PHY layer is performed as unit of octet. The designed FPGA MAC function chip has been implemented in wireless LAN test board and it is verified that DCF function is operated correctly.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.809-812
• /
• 2013

This paper realize power control embedded system with one master of Core-A 32-bit RISC processor and several slaves controling power with synchronized digital signals. Core-A platform provided by Dynalith Systems consists of Core-A processor, AMBA bus, SSRAM, AC97, DMA, UART, GPIO etc. Slave is made by both digital part and analog part. The former generates various power control patterns synchronized with master signal. The latter converts 220V power proportional to 4 bit digital signals. Design of Embedded system is executed in Flowrian2 of System Centroid Inc., in which software is cross-compiled and hardware is verified by simulation. Embedded system is implemented in FPGA board and CPLD chips as well as PCB board for analog power control.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.39 no.5
• /
• pp.477-485
• /
• 2002

In this paper, we present an efficient hardware architecture for the H.263 video codec and its VLSI implementation. This architecture is based on the unified interface by which internal hardware engines and an internal RISC processor are connected one another. The unified interface enables the modular design of internal blocks, efficient hardware/software partitioning, and pipelined paralled operations. The developed VLSI supports the H.263 version 2 profile 3 @ level 10, and moreover, both the control protocol H.245 and the multiplexing protocol H.223. Therefore, it can be used for the complete ITU-T H.324 or 3GPP 3G 324M multimedia processor with the help of an external audio codec. Simultaneous encoding and decoding of QCIF format images at a rate greater than 15 frames per second is achieved at 40 MHz clock frequency.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.6
• /
• pp.1413-1421
• /
• 2014

This paper realize power control embedded system with one master of Core-A 32-bit RISC processor and several slaves controling power with synchronized digital signals. Core-A platform is consisted of Core-A processor, AMBA bus, SSRAM, AC97, DMA, UART, GPIO etc. Slave is made by both digital part and analog part. The former generates various power control patterns synchronized with master signal. The latter converts 220V power proportional to 4 bit digital signals. design of Embedded system is executed in Flowrian II, in which software is cross-compiled and hardware is verified by simulation. Embedded system is implemented in FPGA board and CPLD chips as well as PCB board for analog power control.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.9
• /
• pp.1-12
• /
• 1999

In this paper, we designed an embedded processor with 128Kbytes EPROM and 4Kbytes SRAM based on GMS30C2132 which RISC processor with DSP functions. And a new architecture of bus sharing to control the embedded memory and external memory unit i proposed aiming at one-cycle access between memories and CPU. For embedded 128Kbytes EPROM, we designed the new expansion interface for data size at data ordering with memory organization and the efficient interface for test. The embedded SRAM supports an extended stack area high speed DSP operation, instruction cache and variable data-length control which is accessed with 4K modulo addressing schemes. The proposed new architecture and circuits reduced the memory access cycle time from 40ns and improved operation speed 2-times for program benchmark test. The chip is occupied $108.68mm^2$ using $0.6{\mu}m$ CMOS technology.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.17 no.3
• /
• pp.166-175
• /
• 2024

In this paper, the Window-Masking Method and HAT (Hardware Attached Top) CPU SoM (System on Module) are used to improve the performance and reduce the weight of the MANET (Mobile Ad-hoc Network) network synchronization system using time division redundancy. We propose converting it into a RISC-V based soft-core MCU and mounting it on an FPGA, a hardware accelerator. It was also verified through experiment. In terms of performance, by applying the proposed technique, the synchronization acquisition range is from -50dBm to +10dBm to -60dBm to +10dBm, the lowest input level for synchronization is increased by 20% from -50dBm to -60dBm, and the detection delay (Latency) is 220ns. Reduced by 43% to 125ns. In terms of weight reduction, computing resources (48%), size (33%), and weight (27%) were reduced by an average of 36% by replacing with soft-core MCU.

• The KIPS Transactions:PartA
• /
• v.13A no.4 s.101
• /
• pp.275-288
• /
• 2006

Rapid design space exploration is crucial to customizing embedded system design for exploiting the application behavior. As the time-to-market becomes a key concern of the design, the approach based on an application specific instruction-set processor (ASIP) is considered more seriously as one alternative design methodology. In this approach, the instruction set architecture (ISA) for a target processor is frequently modified to best fit the application with regard to code size and speed. Two goals of this paper is to introduce our new retargetable compiler and how it has been used in ASIP-based design space exploration for a popular digital signal processing (DSP) application. Newly developed retargetable compiler provides not only the functionality of previous retargetable compilers but also visualizes the features of the application program and profiles it so that it can help architecture designers and application programmers to insert new application specific instructions into target architecture for performance increase. Given an initial RISC-style ISA for the target processor, we characterized the application code and incrementally updated the ISA with more application specific instructions to give the compiler a better chance to optimize assembly code for the application. We get 32% performance increase and 20% program size reduction using 6 audio codec specific instructions from retargetable compiler. Our experimental results manifest a glimpse of evidence that a higgly retargetable compiler is essential to rapidly prototype a new ASIP for a specific application.