• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.6
• /
• pp.653-657
• /
• 2015

A new paired gate-source voltage RF capacitance-voltage (C-V) method of extracting the effective channel length and parasitic capacitance using the intersection between two closely spaced linear regression lines of the gate capacitance versus gate length measured from S-parameters is proposed to remove errors from conventional C-V methods. Physically verified results are obtained at the gate-source voltage range where the slope of the gate capacitance versus gate-source voltage is maximized in the inversion region. The accuracy of this method is demonstrated by finding extracted value corresponding to the metallurgical channel length.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05c
• /
• pp.57-60
• /
• 2003

This paper describes the modeling and simulation results for film bulk acoustic resonators(FBAR). We present the frequency tuning mechanisms, analytical solutions of the wave equation and the influence of the thickness of the electrodes. The impedance for PZT based FBAR is derived utilizing proper boundary conditions and their material parameters. Ferroelectrics-based RF filter composed of FBARs are designed.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2022.11a
• /
• pp.600-602
• /
• 2022

2차원 이미지 또는 영상을 통한 자세 추정의 경우, 영상 내에서 발생할 수 있는 탐지 오류, 피사체 잘림, 폐색(Occlusion) 등으로 인해 자세 추정 정확도가 감소할 수 있다. 본 논문에서는 4장 이상의 다양한 각도로 촬영한 이미지를 NeRF(Neural Radiance Fields)를 통해 이미지 합성(Image synthesis)을 진행하여 3차원 모델을 생성한다. 이후 DeepLabCut을 사용하여 관절 좌표와 골격(Skeleton)을 구축한다. 구축한 골격을 인공지능에 학습시킨 뒤 2차원 영상에서의 관절 좌표 인식, 골격 구축, 자세 추정을 진행한다. 2차원 영상 테스트 데이터를 통해, 3차원 모델을 사전 학습한 인공지능 모델과 기존 2차원 이미지를 사용하여 학습한 인공지능 모델의 자세 추정 정확도를 비교한다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.4
• /
• pp.292-299
• /
• 2012

The line-of-sight(LOS) rate is estimated using Kalman filter in Radio-Frequency(RF) seeker. For the two axis gimbaled seeker, proper system modeling is considered and the basic filter structure is set up. The main issue for Kalman filter is choosing the proper process and measurement noise. For the measurement process, the signal to noise ratio(SNR) and other components are introduced. To cope with the eclipse problem or other abnormal seeker status, the pseudo input signal concept is proposed. By conditioning abnormal signals, the LOS rate estimation performance is increased. The process noise is also an important factor in the propagation phase. The analytical approach on a process noise component is performed and a reliable region for the filter is calculated based on the eigenvalue analysis. Some numerical simulations are performed to check the validity of suggested algorithm.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.2
• /
• pp.316-321
• /
• 2005

A new HBT current source model and the corresponding direct parameter extraction methods are presented. Exact analytical expressions for the current source model parameters are derived. This method is applied to scalable modeling of HBT, Some techniques to reduce redundancy of the parameters are introduced. The model based on this method can accurately predict the measured data for the change of ambient temperature, size, and bias.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.12
• /
• pp.21-26
• /
• 2004

In this paper, a direct method is developed to extact RF equivalent circuit of a packaged BJT without optimization. First, parasitic components of plastic package are removed from measured S-parameters using open and short package patterns. Using package do-embedded S-parameters, a direct and simple method is proposed to extract bonding wire inductance and chip pad capacitance between package lead and chip pad. The small-signal model parameters of internal BJT are next determined by Z and Y-parameter formula derived from RF equivalent circuit. The modeled S-parameters of packaged BJT agree well with measured ones, verifying the accuracy of this new extraction method.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.53 no.1
• /
• pp.24-29
• /
• 2004

$CF_4$ gas is one of the most useful gases in modern technologies for semiconductor fabrication. However, there are many problems which should be solved in order to fabricate semiconductor device, for example, etching speed drop due to ion charge-up and etching selectivity drop due to the high electron energy. One of useful method in order to suppress their damages above is pulsed-time modulated plasma (PM). However, transient responses of charged particles occur when the source power is turned-on and -off in PM method. To control plasma properties in detail, such a transient phenomenon must be investigated. In this paper, we investigate $CF_4$ RF plasma properties under a one-dimensional fluid model. And also for dynamic and stable control of $CF_4$ plasmas, we investigated the transient behavior of the plasmas after step up or down of the amplitude of the power source voltage $V_s$(t). Fundamental properties of transient $CF_4$ plasmas was discussed. Furthermore, we intend to discuss new method for pulsed-time plasma modulation.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.2
• /
• pp.18-24
• /
• 2010

A correct and accurate model of optical data storage systems is very important in development and performance evaluation of various data detection algorithms. In this paper, we present an nonlinear modeling scheme of a super-resolution near-field structure (Super-RENS) read-out signal using the canonical piecewise-linear (PWL) and the second-order Volterra models. Nonlinear equalizers may be developed on the basis of the information obtained from this nonlinear modeling. To mitigate the nonlinear inter-symbol interference (ISI), we proposed a new nonlinear equalizer for Super-RENS discs. Its validity is tested with the RF signal samples obtained from a Super-RENS disc. The experiment results verified the possibility that the canonical PWL and the second-older Volterra models can be utilized for nonlinear modeling of Super-RENS systems. The proposed equalizers are superior to the one without equalization in terms of bit error rate (BER).

• The Journal of Korean Institute of Next Generation Computing
• /
• v.13 no.4
• /
• pp.112-123
• /
• 2017

Research for the inverse estimation of RF threats and the efficient electronic attack based on the parameters of the electronic information has been active in the electronic warfare (EW) situations. In this paper, an EW transmission simulator is constructed from the modeling of radar threats, EW receivers, and propagation environments with the collected electronic information in order to verify the performance of the inverse estimation algorithm in various and practical EW situations. In simulation results, we show that the range tracking error and angle tracking error are produced within ten meters and one degree, respectively. And also, we show that the changing relations between the angle tracking error and the parameters of the monopulse angle tracking radar such as the beamwidth and squint angle in simulation results correspond with those in the theoretical modeling. Accordingly, the constructed EW simulator can be used to observe the modifying characteristics of the electronic information in transmission environments, and then, to evaluate the performance of the inverse estimation system in various EW situations.

• Journal of Information Technology Services
• /
• v.15 no.3
• /
• pp.71-95
• /
• 2016

In recent years, text mining has been used to extract meaningful insights from the large volume of unstructured text data sets of various domains. As one of the most representative text mining applications, topic modeling has been widely used to extract main topics in the form of a set of keywords extracted from a large collection of documents. In general, topic modeling is performed according to the weighted frequency of words in a document corpus. However, general topic modeling cannot discover the relation between documents if the documents share only a few terms, although the documents are in fact strongly related from a particular perspective. For instance, a document about "sexual offense" and another document about "silver industry for aged persons" might not be classified into the same topic because they may not share many key terms. However, these two documents can be strongly related from the R&D perspective because some technologies, such as "RF Tag," "CCTV," and "Heart Rate Sensor," are core components of both "sexual offense" and "silver industry." Thus, in this study, we attempted to discover the differences between the results of general topic modeling and R&D perspective topic modeling. Furthermore, we package social issues from the R&D perspective and present a prototype system, which provides a package of news articles for each R&D issue. Finally, we analyze the quality of R&D perspective topic modeling and provide the results of inter- and intra-topic analysis.