• 한국철도학회논문집
• /
• 제12권6호
• /
• pp.887-894
• /
• 2009

라인 레이저와 고속카메라를 이용한 고해상도 레일 마모도 측정 시스템에 대한 최적의 측정 정밀도를 확보하기 위하여 영상 평가지표를 기반으로 촬영 영상에 대한 영상평가를 수행하고 레일 마모도 측정 시스템의 성능을 정량적으로 분석함으로서 시스템 구성과 설치에 따른 레일 마모도 측정 시스템의 성능을 정량적 평가지표(MTF, NPS, DQE)로 추정할 수 있는 방안을 제시하였다.

• 설비공학논문집
• /
• 제4권4호
• /
• pp.289-298
• /
• 1992

Fouling is "a major unsolved" area in heat transfer research. Currently, fouling researches are performed in every directions-fundamental aspects, modeling and cumulating experimental data. In this study, an attempt was made to extend the knowledge in enhanced tube fouling. The Kern-Seaton fouling model which was originally proposed for smooth tube fouling was extended to repeated rib tubes. Key parameters-mass transfer coefficient and wall shear stress-were modeled for repeated rib tubes. Some critical points related with the enhanced tube fouling-uncertainties in the mass transfer rate, wall shear stress modeling, deformation of roughness shape during fouling-were discussed, and some quantitative evaluations were made.

• 응용통계연구
• /
• 제23권3호
• /
• pp.573-584
• /
• 2010

This paper considers the differences in the software execution environments in the testing phase and the operational phase to determine the optimal release time and warranty period of software systems. We formulate equations for the total expected software cost until the end of the software life cycle based on the NHPP. In addition, we derive the optimal release time that minimizes the total expected software cost for an imperfect debugging software reliability model. Finally, we analyze the sensitivity of the optimal testing and maintenance design related to variation of the cost model parameters based on the fault data observed in the actual testing process, and discuss the quantitative properties of the proposed model.

• Korean Journal of Hydrosciences
• /
• 제3권
• /
• pp.31-44
• /
• 1992

Precise run-off forecasting depends on the ability to predict quantitative rainfall intensity. The purpose of this study is to develop a stochastic model for the shori-term rainfall prediction. It is required for the model to predict rainfall intensities at all the telemetered rain-gauge locations simultaneously. All the model parameters, which are used in this work ; velocity and direction of storm movement, radial spectrum, and dimensionless time distribution of rainfall, are the results of the previous study. We formulated the model and operated it, so that in this study was analyzed particulary the influence of 4 dimensionless time distributions on the prediction and the influence of the model on run-off.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 The 8th Asian Symposium on Precision Forging ASPF
• /
• pp.147-151
• /
• 2003

In the study, the modeling strategies in connection with the quantitative prediction and improvement of product accuracy and quality are proposed. The analysis models are composed of process chain, geometry of die, interface conditions between die and workpiece, material parameters, forming velocity of machine, and so on. A 3D simulation platform, around the software MSC. Superforge, is built up for the applications in net-shape forming parts. Some results for bevel gear are shown to demonstrate the efficiency of the modeling system.

• International Journal of Control, Automation, and Systems
• /
• 제4권1호
• /
• pp.42-52
• /
• 2006

In order to utilize hydrodynamic drag force on articulated robots moving in an underwater environment, an optimum motion planning procedure is proposed. The drag force acting on cylindrical underwater arms is modeled and a directional drag measure is defined as a quantitative measure of reaction force in a specific direction in a workspace. A repetitive trajectory planning method is formulated from the general point-to-point trajectory planning method. In order to globally optimize the parameters of repetitive trajectories under inequality constraints, a 2-level optimization scheme is proposed, which adopts the genetic algorithm (GA) as the 1st level optimization and sequential quadratic programming (SQP) as the 2nd level optimization. To verify the validity of the proposed method, optimization examples of periodic motion planning with the simple two-link planner robot are also presented in this paper.

• 제어로봇시스템학회논문지
• /
• 제8권8호
• /
• pp.649-654
• /
• 2002

The essential philosophy of the QFT(Quantitative Feedback Theory) is that a suitable controller can be found by loop shaping a nominal loop transfer function such that the frequency response of this function does not violate the QFT bounds. The loop shaping synthesis involves the identification of a structure and its specialization by means of the parameter optimization. This paper presents an optimization algorithm to estimate the controller parameters from the frequency transfer function synthesis using the TLS(Total Least Squares) in the QFT loop shaping procedure. The proposed method identifies the parameter vector of the robust controller from an overdetermined linear system developed from rearranging the two dimensional system matrices and output vectors obtained from the QFT bounds. The feasibility of the suggested algorithm is illustrated with an example.

• 천문학논총
• /
• 제13권1호
• /
• pp.1-16
• /
• 1998

A quantitative analysis has been made to estimate the horizontal variation of physical parameters in a loop type active prominence by analyzing Call H&K and $H_{\varepsilon}{\ldots}$ spectra taken from such an active prominence (appeared on May 23, 1981 with position angle 251 degree) with Littrow type spectrograph attached to 25cm coronagraph at Norikura Coronal Station of National Astronomical Observatory of Japan. The spectral resolution is 1.12A/mm and the spatial resolution is 25'/mm for Call H&K lines. The present study shows that the turbulent velocity ranges from 10km/s to 20 km/s in the loop prominence, which are in good agreement with those of Hirayama (1989). It is also found that the temperature of the loop prominence is higher than that of quiescent prominences$(\~8,000 K)$ by about 4,000 K, whose temperature deviation seems very high.

• 천문학회보
• /
• 제41권2호
• /
• pp.58.3-58.3
• /
• 2016

The Kepler space mission provides quantitative and qualitative photometric time series of oscillating stars. It is possible to examine statistical study with seismic properties of solar-like stars. Global seismic properties - large frequency separation (${\Delta}{\nu}$), frequency of maximum power (${\nu}_{max}$) and amplitude of Gaussian envelope (A) widely have been used to determine empirical scaling relations for inferring the stellar physical quantities - mass, age and temperature. We aim to confirm whether width of Gaussian envelope on power excess (${\delta}{\nu}_{env}$) can be used with parameter of scaling relation before redgiant phase using Kepler data. Therefore we analyze the characteristics of ${\delta}{\nu}_{env}$ of 129 solar-like stars from main-sequence to subgiant. We have demonstrated that ${\delta}{\nu}_{env}$ has highly correlations with global parameters - ${\Delta}{\nu}$ and ${\nu}max$. We have also found the break of ${\delta}{\nu}_{env}-{\Delta}{\nu}$ and ${\nu}_{max}$ relations.

• 농촌지도와개발
• /
• 제16권1호
• /
• pp.69-98
• /
• 2009

This study empirically studies the effects of Agricultural Technology Service Center's educational program for farmers on their incomes. The educational program for farmers has widely been managed in discourse and policy in Korea. In 2008, Agricultural Technology Service Center managed 88 educational program for farmers, where 6,409 farmers received a certificate. While there are important studies, most of them have concentrated on qualitative analysis and noneconomic effects to an educational program for farmers. This study tried to analyze whether or not there is an economic effect of an educational program for farmers, focusing on the relationship between the educational program for farmers and their income status. Multilevel models (or hierarchical linear models) were applied to this study. Multilevel model is a quantitative model of parameters that vary at more than one level and show hierarchical structures between levels. This study particularly accentuates that an educational program for farmers is more meaningful when it can raise farmers' incomes by region and by educational program for farmers.