• Current Photovoltaic Research
• /
• v.3 no.1
• /
• pp.1-4
• /
• 2015

In this study, we analyzed the correlation between mechanical and electrical properties of low-temperature conductive film (LT-CF) bonded silicon solar cells by a quadrant analysis (horizontal axis (peeling strength), vertical axis (power loss)). We found that a series of points with various bonding parameters such as bonding temperature, pressure and time were distributed in the different three regimes; weak regime (Q2: weak bonding strength and high power loss), moderate regime (Q4 : strong bonding strength and low power loss) and hard regime (Q3 : weak bonding strength and low power loss). Using this analogous technique, it was possible to fabricate the LT-CF bonded silicon solar cells with the various conditions displayed in Q3 of the quadrant plots, possessing the peeling strength of ~ 1N/mm and power loss of 2~3%.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.26 no.6
• /
• pp.381-387
• /
• 2014

Recently the large-height swell-like waves generated in the eastern coast of South Korea have been observed frequently. The characteristics of the runup and overtopping of the large-height swell-like waves formed in deep water and attack the coast, causing damages to both lives and facilities have been studied. The correlation between spectral shape parameters and significant wave height has been investigated by analyzing long term wave spectrum data. Numerical runup experiments using MIKE21 BW Module were performed with $Q_p$, additional shape parameter, and identified the variations and characteristics of runup heights with respect to the variations of spectral shape.

• The Journal of Engineering Geology
• /
• v.17 no.4
• /
• pp.623-631
• /
• 2007

In this paper, dynamic elastic module of banded gneiss were calculated on the basis of SPS velocity logging data obtained from a geotechnical test-hole in Pungsan-dong, Hanam, Gyeonggi Province, Korea. This study mainly focuses on the velocity analysis, Q factor calculation relative to attenuation factor, and generation of crack information and its relation with seismic velocity. As a result, P-wave and S-wave velocity of fresh hard rock was 5,559m/s and 3,063m/s, respectively, with Poisson's ratio being 0.28. With these results, dynamic modules were prepared, and crack information analyzed by acoustic televiewer was incorporated to identify the correlation among and between delay of first arrival by crack amplitude ratio, and velocity. The results of this study revealed that the analyzed logging hole mainly consisted of micro crack and a number of cracks and the size of crack aperture, functioned as a variable to seismic velocity in the micro crack area of this type of hard rock.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.225-228
• /
• 2008

In this paper, we presented our implementation of a counter mode AES based on Virtex4 FPGA. Our design exploits three advanced features: composite field arithmetic SubByte, efficient MixColumn transformation, and On-the-Fly Key-Scheduling for fully pipelined architecture. By pipelining the composite field implementation of the S-box, the area cost is reduced to average 17 percent. By designing the On-the-Fly key scheduling, we implemented an efficient key-expander module which is specialized for a pipelined architecture.

• Journal of the Chungcheong Mathematical Society
• /
• v.19 no.4
• /
• pp.319-324
• /
• 2006

Let K be a finite cyclic extension of $k=\mathbb{F}_q(T)$ of prime degree ${\ell}$. Let ${\tilde{\mathcal{C}}}l_{K,{\ell}}$ be the Sylow ${\ell}$-subgroup of the ideal class group ${\tilde{\mathcal{C}}}l_K$ of $\mathcal{O}_K$. The structure of ${\tilde{\mathcal{C}}}l_{K,{\ell}}$ as $\mathbb{Z}_{\ell}[G]$/<$N_G$>-module is determined the dimensions $${\lambda}_i\;:=dim_{\mathbb{F}_{\ell}}({\tilde{\mathcal{C}}}l_{K,{\ell}}^{({\sigma}-1)^{i-1}}/{\tilde{\mathcal{C}}}l_{K,{\ell}}^{({\sigma}-1)^i})$$ for $i{\geq}1$. In this paper we investigate the dimensions ${\lambda}_1$ and ${\lambda}_2$.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2006.02a
• /
• pp.1-14
• /
• 2006

[ $\blacklozenge$ ] PCB에 있어서 Embedded passive 는chip을 직접 내장하는 방법과 특별한 특성을 갖는 재료 및 공법을 사용하여 chip 응 대치하는 방법이 있다. $\blacklozenge$ Embedded passive PCB가 적용될 수 있는 유력한 적용 분야는 소형화가가 요구되는 분야와 고속 특성이 요구되는 분야를 들 수 있고, 따라서, Module, SOP/SIP, Package substrate 등이 우선적으로 적용될 수 있는 분야다. $\blacklozenge$ Embedded capacitor를 적용한 경우, 일반적인 chip capacitor를 적용한 경우보다 더 좋은 전기적인 특성(SRF, Q)을 얻을 수 있으며, solder joint 등의 영향을 포함하면 더욱 좋은 특성이 얻어질 수 있다. $\blacklozenge$ Embedded passive 의 상용화를 위해서, 공차를 관리하는 방법의 개발과 공차에 대한 합리적인 규격을 설정하는 것이 우선 과제이다. $\blacklozenge$ Embedded resistor 의 경우, Laser trim을 적용하여 ${\pm}\;5\%$ 또는 그 이하의 공차를 실현할 수 있고, $30\;K\Omega/sq$. 의 고저항의 적용까지 가능하다. $\blacklozenge$ 고속 신호에서의 noise 감소, module, SIP/SOP 의 소형화를 실현하는데 Embedded passive(혹은 active)PCB 가 기여 할 수 있을 것이고, 이를 위하여 Set 업체, PCB 업체, 재료 업체간의 지속적인 협조가 필요할 것이다.

• Kyungpook Mathematical Journal
• /
• v.62 no.3
• /
• pp.407-423
• /
• 2022

In this paper, we determine the structure of rings that have secondary representation (called representable rings) and give some characterizations of these rings. Also, we characterize Artinian rings in terms of representable rings. Then we introduce completely representable modules, modules every non-zero submodule of which have secondary representation, and give some necessary and sufficient conditions for a module to be completely representable. Finally, we define strongly representable modules and give some conditions under which representable module is strongly representable.

• Kyungpook Mathematical Journal
• /
• v.49 no.3
• /
• pp.419-424
• /
• 2009

Let J be the Jacobian variety of a hyperelliptic curve over $\mathbb{Q}$. Let M be the field generated by all square roots of rational integers over a finite number field K. Then we prove that the Mordell-Weil group J(M) is the direct sum of a finite torsion group and a free $\mathbb{Z}$-module of infinite rank. In particular, J(M) is not a divisible group. On the other hand, if $\widetilde{M}$ is an extension of M which contains all the torsion points of J over $\widetilde{\mathbb{Q}}$, then $J(\widetilde{M}^{sol})/J(\widetilde{M}^{sol})_{tors}$ is a divisible group of infinite rank, where $\widetilde{M}^{sol}$ is the maximal solvable extension of $\widetilde{M}$.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.34C no.11
• /
• pp.20-28
• /
• 1997

In this paper, quantization and inverse quantizatio unit, a sa component of MPEG-2 moving picture compression system, ar edesigned. In the processing of quantization, this design adopted newly designed arithmetic units in which quantization matrices and scale code was expressed with SD(signed-digit) code. In the arithmetic unit of inverse quantization, quantization scale code, which has 5-bits length, is splited into two pieces; 2-bits for control code, 3-bits for quantization data, and the method to devise quantization step size is proposed. The design was coded with VHDL and synthesis results in that it consumed about 6,110 gates, and operating speed is 52MHz.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1487-1490
• /
• 2003

In this paper, the application of object-oriented Data Model to develop a multibody dynamic system, called O-DYN, is introduced. Mechanical components, such as bodies, joints, forces are modeled as objects which have data and method by using object-oriented modeling methodology. O-DYN, a dynamic analysis system, based on the object-oriented modeling concept is made in C++. One example is analyzed through the O-DYN, It is expected that the analysis program or individual module constructed in this paper would be useful for mechanical engineers in predicting the dynamic responses of multibody systems and developing an analysis program